• There are no items in your cart

API 17E REDLINE : 2010

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

SPECIFICATION FOR SUBSEA UMBILICALS
Withdrawn date

02-01-2024

Published date

01-01-2010

API Foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
4 Functional requirements
5 Safety, design and testing philosophy
6 Design requirements
7 Component design, manufacture and test
8 Terminations and ancillary equipment design
9 Umbilical design
10 Umbilical manufacture and test
11 Factory acceptance tests
12 Storage
13 Pre-installation activity
14 Load-out
15 Installation operations
Annex A (informative) - Information that should be
        provided in a purchaser's functional
        specification
Annex B (informative) - Umbilical testing
Annex C (informative) - Hose and tube preferred
        sizes
Annex D (normative) - Characterization tests for
        hoses and umbilicals
Annex E (informative) - Fatigue testing
Annex F (informative) - Load-effect analysis
Annex G (informative) - Umbilical full-scale tests
Annex H (informative) - Tube material matrix
Annex I (informative) - Tube-wall thickness example
        calculation
Annex J (informative) - Buckling of metallic tubes
Annex K (informative) - Use of the API Monogram
        Program by Licensees
Bibliography

Describes requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation and operation of umbilicals and associated ancillary equipment for the petroleum and natural gas industries.

DocumentType
Redline
PublisherName
American Petroleum Institute
Status
Withdrawn

ASTM E 1001 : 2016 : REDLINE Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
IEC 60038:2009 IEC standard voltages
IEC 60793-1-1 : 2017 OPTICAL FIBRES - PART 1-1: MEASUREMENT METHODS AND TEST PROCEDURES - GENERAL AND GUIDANCE
IEC 60228:2004 Conductors of insulated cables
EN 10257-2:2011 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables
ASTM E 309 : 2016 : REDLINE Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
IEC 60502-2:2014 RLV Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) – Part 2: Cables for rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV)
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
ASME PV CODE 9 : 2017 BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
ISO 6801:1983 Rubber or plastics hoses Determination of volumetric expansion
IEC 60793-2:2015 Optical fibres - Part 2: Product specifications - General
ASTM E 562 : 2011 : REDLINE Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ISO 14732:2013 Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
IEC 60502-1:2004+AMD1:2009 CSV Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV)
ISO 4672:1997 Rubber and plastics hoses Sub-ambient temperature flexibility tests
ASTM E 384 : 2017 : REDLINE Standard Test Method for Microindentation Hardness of Materials
ASTM E 273 : 2015 : REDLINE Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
IEC 60794-1-2:2017 Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance
ASME B31.3:2016 PROCESS PIPING
ISO 13628-11:2007 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 11: Flexible pipe systems for subsea and marine applications
IEC 60794-1-1:2015 Optical fibre cables - Part 1-1: Generic specification - General
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
API 2RD : 2013 DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS
ASTM E 426 : 2016 : REDLINE Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
ISO 8308:2015 Rubber and plastics hoses and tubing Determination of transmission of liquids through hose and tubing walls
BS 7950:1997 Specification for enhanced security performance of windows for domestic applications
EN 10204:2004 Metallic products - Types of inspection documents
API RP 17B : 2014 RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
ISO 13628-6:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems
ASME PV CODE 5 : 2017 BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION
ISO 7751:2016 Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure
API SPEC 17E : 2017 SPECIFICATION FOR SUBSEA UMBILICALS
ISO 13628-8:2002 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
ISO 1402:2009 Rubber and plastics hoses and hose assemblies Hydrostatic testing
ISO 4080:2009 Rubber and plastics hoses and hose assemblies Determination of permeability to gas
ISO 6803:2017 Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
API RP 17I : 1996 INSTALLATION GUIDELINES FOR SUBSEA UMBILICALS
ASTM E 8/E8M : 2016-09 TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS
ASTM E 92 : 2017 : REDLINE Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
EEMUA 194 : 2012 GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.