• There are no items in your cart

API 614 : 2008

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES

Available format(s)

Hardcopy , PDF

Superseded date

02-22-2022

Language(s)

English

Published date

04-01-2008

API Foreword
Foreword
Introduction
Part 1: General requirements
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
4 General
5 Piping
6 Instrumentation, control and electrical systems
7 Inspection testing, and preparation for shipment
8 Vendor's data
Annex A (informative) - Datasheets
Annex B (informative) - Symbols
Annex C (informative) - Vendor drawing and data requirements (VDDR)
Annex D (informative) - Oil or gas filter performance and
        oil-system cleanliness testing
Annex E (informative) - International materials specifications
Annex F (informative) - Explanation of reservoir levels
Bibliography
Part 2: Special-purpose oil systems
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
4 General requirements
5 Piping
6 Instrumentation, control and electrical systems
7 Inspection, testing and preparation for shipment
8 Vendor's data
Annex A (informative) - Datasheets
Annex B (informative) - Piping and instrument diagrams
Annex C (informative) - Inspector's checklist
Bibliography
Part 3: General-purpose oil systems
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
4 General
5 Piping
6 Instrumentation and electrical systems
7 Inspection, testing and preparation for shipment
8 Vendor's data
Annex A (informative) - Datasheets
Annex B (informative) - Piping and instrument diagrams
Annex C (informative) - Inspector's checklist
Annex D (informative) - Guidance to system reliability
Bibliography
Part 4: Self-acting gas seal support systems
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
4 General
5 Piping and tubing
6 Instrumentation, control and electrical systems
7 Inspection, testing and preparation for shipment
8 Vendor's Data
Annex A (informative) - Datasheets
Annex B (informative) - Piping and instrument diagrams
Annex C (informative) - Inspector's checklist
Annex D (informative) - Dry-gas-seal connection terminology and
        configurations
Bibliography

Describes general requirements for lubrication systems, oil-type shaft-sealing systems, drygas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications.

DevelopmentNote
Also numbered as ISO 10438-1, ISO 10438-2, ISO 10438-3 & ISO 10438-4. (04/2008)
DocumentType
Standard
Pages
238
ProductNote
This product is unavailable in Cuba, Iran, North Korea, Syria
PublisherName
American Petroleum Institute
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
BS EN ISO 10438-2:2003 Identical
BS 4807:1991 Corresponds
BS EN ISO 10438-4:2003 Identical
BS EN ISO 10438-3:2003 Identical
BS EN ISO 10438-1:2003 Identical

API 618 : 2007 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
BS ISO 3977-3:2004 Gas turbines. Procurement Design requirements
API 617 : 2014 AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS
I.S. EN ISO 10439-2:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 2: NON-INTEGRALLY GEARED CENTRIFUGAL AND AXIAL COMPRESSORS (ISO 10439-2:2015)
API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 677 : 2006 : R2010 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
IEEE 3004.8-2016 IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems
API 11PGT : 1992 RECOMMENDED PRACTICE FOR PACKAGED COMBUSTION GAS TURBINES
ASTM D 6439 : 2011 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
BS EN ISO 10437:2003 Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications
BS EN ISO 10438-3:2003 Petroleum, petrochemical and natural gas industries. Lubrication, shaft sealing and control oil systems and auxilliaries General-purpose oil systems
DEFSTAN 02-303/2(2010) : 2010 LUBRICATION OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS AND SUBMARINES
API 618 : 2007 : R2016 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
BS EN ISO 10439-4:2015 Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors Expander-compressors
API 676 REDLINE : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
10/30231436 DC : 0 BS EN ISO 10439-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 2: NON-INTEGRALLY GEARED CENTRIFUGAL AND AXIAL COMPRESSORS
API 672 : 2004 PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 611 : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 550PT1SEC13 : 4ED 85 ALARMS AND PROTECTIVE DEVICES
ISO 3977-3:2004 Gas turbines — Procurement — Part 3: Design requirements
BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
BS EN ISO 10440-2:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free)
I.S. EN ISO 10440-1:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
I.S. EN ISO 10438-3:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 3: GENERAL-PURPOSE OIL SYSTEMS
I.S. EN ISO 10438-4:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 4: SELF-ACTING GAS SEAL SUPPORT SYSTEMS
I.S. EN ISO 10438-1:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS
UNI EN ISO 10438-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS
04/30114086 DC : DRAFT JUL 2004 EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE)
API 611 : 2008 : R2014 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
API 613:2003 SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 619 REDLINE : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
ASTM D 6439 : 2011 : R2017 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
API 612 : 2014 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS
API 614 REDLINE : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
API 540 : 1999 : R2006 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
ISO 10436:1993 Petroleum and natural gas industries — General-purpose steam turbines for refinery service
ISO 10440-2:2001 Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free)
ISO 10439-4:2015 Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 4: Expander-compressors
API STD 612:2020 Petroleum, Petrochemical, and Natural Gas Industries - Steam Turbines - Special-purpose Applications
UNI EN ISO 10438-3 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 3: GENERAL-PURPOSE OIL SYSTEMS
UNI EN ISO 10440-1 : 2008 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
10/30231432 DC : 0 BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS
BS EN ISO 10439-2:2015 Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors Non-integrally geared centrifugal and axial compressors
ISO 13707:2000 Petroleum and natural gas industries Reciprocating compressors
10/30231444 DC : 0 BS EN ISO 10439-4 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 4: EXPANDER-COMPRESSORS
10/30214867 DC : 0 BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API 675 : 2012 POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
DEFSTAN 02-303/3(2015) : 2015 LUBRICATING OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS & SUBMARINES
API 676 CHINESE : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
API 682 CHINESE : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API STD 676 : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
API 9100B : 1998 GUIDANCE DOCUMENT FOR MODEL EHS MANAGEMENT SYSTEM
API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
API 676 : 2009 : R2015 POSITIVE DISPLACEMENT PUMPS - ROTARY
API 673 : 2014 CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 691 : 2017 RISK-BASED MACHINERY MANAGEMENT
I.S. EN ISO 10439-4:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 4: EXPANDER-COMPRESSORS (ISO 10439-4:2015)
API 540:1999 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
I.S. EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
BS EN ISO 10440-1:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free)
ISO 10437:2003 Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
BS EN ISO 10438-1:2003 Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements
BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN ISO 10437:2003 Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003)
EN ISO 10438-1:2007 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007)
EN ISO 10440-2:2001 Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
EN ISO 10438-3:2007 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems (ISO 10438-3:2007)
EN ISO 10439-2:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 2: Non-integrally geared centrifugal and axial compressors (ISO 10439-2:2015)
EN ISO 21049:2004 Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
UNI EN ISO 10438-4 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT- SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 4: SELF-ACTING GAS SEAL SUPPORT SYSTEMS
EN ISO 10439-4:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 4: Expander-compressors(ISO 10439-4:2015)
EN ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007)
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
API 611 REDLINE : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 677 :2006 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
09/30171555 DC : DRAFT SEP 2009 BS EN ISO 10437 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS
API 677 : 2006 : R2016 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 682 : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API 619 : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 538 : 2015 INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
BS EN ISO 10438-4:2003 Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries Self-acting gas seal support systems
ISO 10439-2:2015 Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 2: Non-integrally geared centrifugal and axial compressors
ISO 21049:2004 Pumps Shaft sealing systems for centrifugal and rotary pumps
BS EN ISO 21049:2004 Pumps. Shaft sealing systems for centrifugal and rotary pumps
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
EN ISO 10438-4:2007 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems (ISO 10438-4:2007)
PIP PNC00005 : 2016 DESIGN OF ASME B31.3 - METALLIC PIPING SYSTEMS

ISO 13707:2000 Petroleum and natural gas industries Reciprocating compressors
ISO 15649:2001 Petroleum and natural gas industries — Piping
NEMA MG 1 : 2016 MOTORS AND GENERATORS
API 661 : 2015 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS
ASME B73.3 : 2015 SPECIFICATION FOR SEALLESS HORIZONTAL END SUCTION CENTRIFUGAL PUMPS FOR CHEMICAL PROCESS
ASME PV CODE 9 : 2017 BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
ISO 15761:2002 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
ASTM A 181/A181M : 2014 : REDLINE Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
IEEE 841-2009 IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp)
ISO 16812:2007 Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers
API 520-1 : 2014 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION
NAS1638:2011 CLEANLINESS REQUIREMENTS OF PARTS USED IN HYDRAULIC SYSTEMS
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
NEMA 250 : 2014 ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM)
ASME B31.3:2016 PROCESS PIPING
API std 602 : 2015 GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
API STD 600 : 2015 STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS
ISO 4572:1981 Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance
ISO 10438-3:2007 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems
ISO 10434:2004 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
API 578 : 2010 GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
API 617 : 2014 AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
API 660 : 2015 SHELL-AND-TUBE HEAT EXCHANGERS
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
API 551 : 2016 PROCESS MEASUREMENT
API 526 : 2017 FLANGED STEEL PRESSURE-RELIEF VALVES
ASTM A 105/A105M : 2014-11 SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ISO 10438-1:2007 Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
API 672 : 2004 PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ISO 10438-4:2007 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Self-acting gas seal support systems
API 686 : 2009 RECOMMENDED PRACTICE FOR MACHINERY INSTALLATION AND INSTALLATION DESIGN
SAE AS 4059F : 2013 AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS
API 673 : 2014 CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ISO 13706:2011 Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers
ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
ASME B73.1 : 2012 SPECIFICATION FOR HORIZONTAL END SUCTION CENTRIFUGAL PUMPS FOR CHEMICAL PROCESS
ISO 16889:2008 Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element
ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
AWS D1.1/D1.1M : 2015 STRUCTURAL WELDING CODE-STEEL
API 594 : 2017 CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING
ASTM A 312/A312M : 2017-03 SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
ISA 18.1 : 1979 ANNUNCIATOR SEQUENCES AND SPECIFICATIONS
CEN/TR 14549:2004 Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive
API 520-2 : 2015 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION
API 619 : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
ISO 10438-2:2007 Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems
ISO 10439:2002 Petroleum, chemical and gas service industries Centrifugal compressors

View more information
US$343.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.