Customer Support: +1 416-401-8730

Login to i2i Subscription Intertek.com
  • There are no items in your cart
Please enter a keyword to search
Advanced search

AS 1302-1991

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Steel reinforcing bars for concrete
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-30-2017

Published date

01-01-1991

Publisher

Standards Australia

1 - AS 1302-1991 STEEL REINFORCING BARS FOR CONCRETE
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 REFERENCED DOCUMENTS
6 - 3 DEFINITIONS
6 - 3.1 Angle of deformation flanks
6 - 3.2 Bar size
6 - 3.3 Calculated mass per metre
6 - 3.4 Deformed bar
6 - 3.5 Longitudinal rib
6 - 3.6 Nominal area
6 - 3.7 Plain round bar
6 - 3.8 Transverse deformation
6 - 3.9 Transverse deformation angle
6 - 3.10 Transverse deformation spacing
7 - 4 GRADE CLASSIFICATION AND DESIGNATION
7 - 4.1 Classification
7 - 4.2 Designation
7 - 5 CHEMICAL COMPOSITION
7 - 5.1 General
7 - 5.2 Cast analysis
7 - 5.3 Product analysis
7 - 5.4 Residual elements
7 - 6 MARGINS OF MANUFACTURE
8 - 7 QUALITY OF FINISHED BAR
8 - 8 DEFORMATION REQUIREMENTS FOR ANCHORAGE WITH CONCRETE
8 - 8.1 General
8 - 8.2 Spacing of transverse deformations
9 - 8.3 Transverse deformation angle
9 - 8.4 Gap between rows of transverse deformations
9 - 8.5 Height of transverse deformations
9 - 8.6 Height of longitudinal rib
9 - 8.7 Angle of deformation flanks
9 - 9 PREPARATION OF TEST PIECES FOR MECHANICAL TESTING
9 - 9.1 General
9 - 9.2 Tensile test pieces
9 - 9.3 Bend test pieces
9 - 10 MECHANICAL TEST REQUIREMENTS
9 - 10.1 Tensile test
10 - 10.2 Bend test
10 - 11 ROUNDING OF NUMBERS
10 - 11.1 General
10 - 11.2 Tensile properties
10 - 12 REVERSE-BEND TEST
10 - 13 MARKING
11 - APPENDIX A - PURCHASING GUIDELINES
11 - A1 INFORMATION TO BE SUPPLIED BY THE PURCHASER
11 - A2 CERTIFICATES OF COMPLIANCE AND TEST CERTIFICATES
11 - A2.1 Certificates of compliance
11 - A2.2 Test certificates
11 - A3 INSPECTION
12 - APPENDIX B - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
12 - B1 SCOPE
12 - B2 STATISTICAL SAMPLING
12 - B3 PRODUCT CERTIFICATION-STANDARDSMARK
12 - B4 SUPPLIER’S QUALITY SYSTEM
12 - B5 OTHER MEANS OF ASSESSMENT
12 - B5.1 General
12 - B5.2 Sampling and testing
13 - B5.3 Compliance
13 - B5.4 Retests
14 - APPENDIX C - REVERSE-BEND TEST FOR REINFORCING BARS
14 - C1 SCOPE
14 - C2 APPARATUS
14 - C3 PREPARATION OF THE TEST PIECE
14 - C4 PROCEDURE
14 - C5 ASSESSMENT OF RESULTS OF THE REVERSE-BEND TEST
15 - APPENDIX D - METHOD OF MEASUREMENT OF DEFORMATIONS
15 - D1 TRANSVERSE DEFORMATION SPACING
15 - D2 HEIGHT OF TRANSVERSE DEFORMATIONS
15 - D2.1 Average height method
15 - D2.2 Peak height method
15 - D3 HEIGHT OF LONGITUDINAL RIB
15 - D4 ANGLE OF DEFORMATION FLANKS

This Standard specifies requirements for plain and deformed hot-rolled bars for use as reinforcement for concrete. It applies to reinforcement supplied in straight lengths or in coil form. The following significant changes to the previous edition have been made: fabrication requirements have been amended to comply with AS 3600 and tolerances on straightness of reinforcing bars have been added.

This Standard specifies requirements for plain and deformed hot-rolled steel bars for use as reinforcement for concrete. It applies to reinforcement supplied in straight lengths or in coil form. For coiled material, the requirements apply to the straightened product.NOTES:For 'Purchasing Guidelines', see Appendix A.For 'Means for demonstrating compliance with this Standard', see Appendix B.For welding of bars complying with this Standard, see AS 3600 and AS 1554.3.This Standard is not applicable to prestressing steels.

Committee
BD-084
DocumentType
Standard
ISBN
0 7262 6635 3
Pages
10
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes

Under Revision see DR 98119 (in part) For history before 1977 see Preface.Second edition AS 1302-1977.Third edition 1982.Fourth edition 1991. For history before 1977 see Preface. Second edition AS 1302-1977. Third edition 1982. Fourth edition 1991.

AS 4204-1994 Headstones and cemetery monuments
AS 3700 SUPP 4-1992 Masonry in buildings (known as the SAA Masonry Code) - Extracts from AS 3700 - Masonry construction requirements (Supplement to AS 3700-1988)
AS 2870-1996 Residential slabs and footings - Construction
AS 3700 SUPP 5-1992 Masonry in buildings (known as the SAA Masonry Code) - Extracts from AS 3700 - Masonry housing requirements (Supplement to AS 3700-1988)
AS 3958.1-1991 Ceramic tiles - Guide to the installation of ceramic tiles
AS 2159-1995 Piling - Design and installation
AS 3600-2001 Concrete structures
AS 4425-1996 Above ground burial structures
AS/NZS 3500.1.2:1998 National plumbing and drainage Water supply - Acceptable solutions
AS 3700 SUPP 3-1992 Masonry in buildings (known as the SAA Masonry Code) - Extracts from AS 3700 - Masonry materials requirements (Supplement to AS 3700-1988)
AS 3990-1993 Mechanical equipment - Steelwork (Reconfirmed 2016)
AS 3600-1994 Concrete structures
AS/NZS 3500.2.2:1996 National plumbing and drainage Sanitary plumbing and drainage - Acceptable solutions
AS 3700-1998 Masonry structures
AS 4058-1992 Precast concrete pipes (pressure and non-pressure)
AS 3500.1-1992 National Plumbing and Drainage Code - Water supply
AS 3700-2001 Masonry structures
AS/NZS 4065:2000 Concrete utility services poles
HB 67-1995 Concrete practice on building sites
AS/NZS 3845:1999 Road safety barrier systems
AS 1597.1-1974 Precast reinforced concrete box culverts Small culverts (not exceeding 1200 mm width and 900 mm depth)
SAA HB 109-1998 Slabs and footings for reinforced masonry houses
AS/NZS 3679.1:1996 Structural steel Hot-rolled bars and sections
AS 4198-1994 Precast concrete access chambers for sewerage applications
AS 1597.2-1996 Precast reinforced concrete box culverts Large culverts (from 1500 mm span and up to and including 4200 mm span and 4200 mm height)
AS 3727-1993 Guide to residential pavements
AS/NZS 4496:1997 Recommended practice for the colour coding of steel products (Reconfirmed 2016)
AS/NZS 3679.2:1996 Structural steel - Welded I sections
AS 2327.1-1996 Composite structures - Simply supported beams
AS/NZS 1546.1:1998 On-site domestic wastewater treatment units - Septic tanks
HB 109-1998 Slabs and footings for reinforced masonry houses
AS 2783-1992 Use of reinforced concrete for small swimming pools
AS 3679.2-1991 Structural steel - Welded sections
AS/NZS 3500.3.2:1998 National plumbing and drainage Stormwater drainage - Acceptable solutions

View more information
US$34.90
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

or

Get in touch with us