AS 1603.2-1997
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
01-05-1997
Specifies the requirements for the design, construction and performance of point type smoke detectors as used in automatic fire detection and alarm systems.
This Standard specifies requirements for the design, construction and performance of point type smoke detectors as used in automatic fire detection and alarm systems.This Standard does not cover detectors installed in air handling ducts, although many provisions herein could be applied to such applications.This Standard applies to smoke detectors intended for installation in accordance with AS 1670 and connected to compatible control and indicating equipment (CIE).
| Committee |
FP-002
|
| DocumentType |
Standard
|
| ISBN |
0 7337 0870 6
|
| Pages |
10
|
| ProductNote |
Reconfirmed 08/07/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 08/07/2016.
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
Amendment 1 to AS 1603.2-1997 see DR 98022. Under Revision see DR 03323 CP First published as AS 1603.2-1990.Second edition 1997.Reconfirmed 2016. First published as AS 1603.2-1990. Second edition 1997.
| AS 2362.6-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Static discharge test |
| AS 2362.19-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Dust test |
| AS 2362.17-2001 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Sensitivity test (Reconfirmed 2016) |
| AS 2362.5-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Insulation resistance test |
| AS 2362.12-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Dry heat test |
| AS 3100-1990 | Approval and test specification - General requirements for electrical equipment |
| AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
| AS 2362.4-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Voltage stability test |
| AS 2362.15-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Vibration test |
| AS 3121-1992 | Approval and test specification - Insulating mouldings |
| AS 2362.13-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Corrosion test |
| AS 1670-1986 | Automatic fire detection and alarm systems - System design, installation, and commissioning |
| AS 2362.25-2004 | Fire detection, warning, control and intercom systems Methods of test - Indicator visibility test (Reconfirmed 2016) |
| AS 2362.12-2002 | Fire detection, warning, control and intercom systems Methods of test - Dry heat test (Reconfirmed 2016) |
| AS 2362.10-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Low temperature test |
| AS 2362.25-1996 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Indicator visibility test |
| AS 2362.16-2002 | Fire detection, warning, control and intercom systems Methods of test - Impact test (Reconfirmed 2016) |
| AS 2362.19-2002 | Fire detection, warning, control and intercom systems Methods of test - Dust test (Reconfirmed 2016) |
| AS 1939-1990 | Degrees of protection provided by enclosures for electrical equipment (IP Code) |
| AS 2362.15-2002 | Fire detection, warning, control and intercom systems Methods of test - Vibration test (Reconfirmed 2016) |
| AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
| AS 2362.9-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - High frequency disturbance test |
| AS 2362.11-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Damp heat test |
| AS 2546.1-1982 | Printed boards General requirements and test methods |
| AS 2362.13-2002 | Fire detection, warning, control and intercom systems Methods of test - Corrosion test (Reconfirmed 2016) |
| AS 2362.7-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Electromagnetic interference test |
| AS 2362.18-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Air velocity stability test |
| AS 2362.10-2002 | Fire detection, warning, control and intercom systems - Methods of test Low temperature test (Reconfirmed 2016) |
| AS 2362.8-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Impulse voltage withstand test |
| AS 2484.2-1991 | Fire - Glossary of terms Fire protection and firefighting equipment |
| AS 2362.11-2002 | Fire detection, warning, control and intercom systems Methods of test - Damp heat test |
| AS 2362.18-2002 | Fire detection, warning, control and intercom systems Methods of test - Air velocity stability test (Reconfirmed 2016) |
| AS 2362.16-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Impact test |
| AS 2362.17-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Sensitivity test |
| AS/NZS 1905.1:1997 | Components for the protection of openings in fire-resistant walls Fire-resistant doorsets |
| AS 1603.8-1996 | Automatic fire detection and alarm systems Multi-point aspirated smoke detectors (Reconfirmed 2016) |
| AS 2834-1995 | Computer accommodation |
| AS 1851.15-1997 | Maintenance of fire protection equipment - Local fire alarm systems |
| SAA HB20-1996 | Graphical symbols for fire protection drawings (Reconfirmed 2018) |
| AS/NZS 1668.1:1998 | The use of ventilation and airconditioning in buildings Fire and smoke control in multi-compartment buildings |
| AS 3772-1990 | Fire protection of cooking areas |
| AS 3007.3-2004 | Electrical installations - Surface mines and associated processing plant - General requirements for equipment and ancillaries |
| AS 4332-2004 | The storage and handling of gases in cylinders (Reconfirmed 2016) |
| AS 1670.2-1997 | Fire detection, warning, control and intercom systems - System design, installation and commissioning - Local fire |
| AS 2665-2001 | Smoke/heat venting systems - Design, installation and commissioning (Reconfirmed 2016) |
| AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
| AS 4332-1995 | The storage and handling of gases in cylinders |
| AS 1670.1-2004 | Fire detection, warning, control and intercom systems - System design, installation and commissioning Fire |
| AS 4428.9-1996 | Fire detection, warning, control and intercom systems - Control and indicating equipment - Requirements for wire-free alarm zone circuits |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.