• There are no items in your cart

AS 1796-1993

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Certification of welders and welding supervisors
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-04-2018

Published date

01-01-1993

Preview

1 - AS 1796-1993 CERTIFICATION OF WELDERS AND WELDING SUPERVISORS
4 - PREFACE
5 - CONTENTS
7 - SECTION 1 SCOPE AND GENERAL
7 - 1.1 SCOPE
7 - 1.2 APPLICATION
7 - 1.3 TITLES AND TYPES OF CERTIFICATES
7 - 1.4 REFERENCED DOCUMENTS
7 - 1.5 DEFINITIONS
7 - 1.5.1 Air-arc gouging
7 - 1.5.2 Approved
8 - 1.5.3 Approved trade
8 - 1.5.4 Automatic welding
8 - 1.5.5 Backing run
8 - 1.5.6 Butt weld
8 - 1.5.7 Certificated welder
8 - 1.5.8 Certificated welding supervisor
8 - 1.5.9 Competency assessment
8 - 1.5.10 Concave fillet weld
8 - 1.5.11 Consumable
8 - 1.5.12 Convex fillet weld
8 - 1.5.13 Crack
8 - 1.5.14 Crater
9 - 1.5.15 Examining Authority
9 - 1.5.16 Fillet weld
9 - 1.5.17 Flux-cored arc welding (FCAW)
9 - 1.5.18 Fuel gas
10 - 1.5.19 Gas metal-arc welding (GMAW)
10 - 1.5.20 Gas tungsten-arc welding (GTAW)
10 - 1.5.21 Gas tungsten-arc welding/manual metal-arc welding (GTAW/MMAW)
10 - 1.5.22 Gas welding (GW)
10 - 1.5.23 Inclusion
10 - 1.5.24 Incompletely filled groove
10 - 1.5.25 Lack of root fusion
10 - 1.5.26 Leg length (in a fillet weld)
10 - 1.5.27 Manual metal-arc welding (MMAW)
10 - 1.5.28 Overlap
10 - 1.5.29 Penetration bead
10 - 1.5.30 Porosity
10 - 1.5.31 Qualified welding procedure
11 - 1.5.32 Regulatory Authority
11 - 1.5.33 Reinforcement
12 - 1.5.34 Root concavity
12 - 1.5.35 Root penetration
12 - 1.5.36 Root run
12 - 1.5.37 Shall
12 - 1.5.38 Should
12 - 1.5.39 Size of weld
13 - 1.5.40 Stray arc strike
13 - 1.5.41 Tack weld
13 - 1.5.42 Test piece
13 - 1.5.43 Test specimen
13 - 1.5.44 Undercut
13 - 1.5.45 Welder certification
13 - 1.5.46 Welder qualification
13 - 1.5.47 Welding position
15 - SECTION 2 WELDER CERTIFICATION
15 - 2.1 PRE-EXAMINATION REQUIREMENTS
15 - 2.1.1 Submission of evidence
15 - 2.1.2 Certificates No.1 and No.1E
15 - 2.1.3 Certificate No.2
15 - 2.1.4 Certificates No.3 and No.3E
15 - 2.1.5 Certificate No.4
15 - 2.1.6 Certificate No.5
16 - 2.1.7 Certificate No.6
16 - 2.1.8 Certificate No.7
16 - 2.1.9 Certificate No.8F
16 - 2.1.10 Certificate No.8G
16 - 2.1.11 Certificate No.9
16 - 2.2 THEORY EXAMINATION
16 - 2.2.1 Syllabus
18 - 2.2.2 Type of examination
18 - 2.2.3 Supplementary examination
18 - 2.2.4 Exemption from theory examination
18 - 2.2.5 Exemption from supplementary examination
18 - 2.2.6 Location of examination
18 - 2.2.7 Duration of examination
18 - 2.2.8 Criteria for examination marking
18 - 2.3 PRACTICAL TESTS
18 - 2.3.1 Types of practical tests
18 - 2.3.2 Elective certificates
18 - 2.3.3 Test pieces
24 - 2.3.4 Welding consumable
24 - 2.3.5 Assembly of test pieces for welding
25 - 2.3.6 Making a test weld
26 - 2.3.7 Flame cutting test
26 - 2.3.8 Gouging test
27 - 2.3.9 Replacement of test piece
27 - 2.3.10 Heat treatment of test pieces
27 - 2.3.11 Identification of completed test pieces
27 - 2.3.12 Exemption from welding tests
27 - 2.3.13 Exemption from flame cutting and gouging test
27 - 2.3.14 Location for practical tests
27 - 2.3.15 Duration of practical tests
27 - 2.4 ASSESSMENT OF PRACTICAL TESTS
27 - 2.4.1 Examination and assessment of practical tests
27 - 2.4.2 Visual examination
33 - 2.4.3 Destructive testing
33 - 2.4.4 Bend tests
36 - 2.4.5 Nick-break test
38 - 2.4.6 Fillet break test
38 - 2.4.7 Radiographic examination
38 - 2.5 CERTIFICATE
38 - 2.5.1 Issue of certificate
39 - 2.5.2 Exemption from examination and tests by a certificated welder
39 - 2.5.3 Information to be shown on a certificate
39 - 2.5.4 Application of certificates
39 - 2.5.5 Period of validity
39 - 2.5.6 Re-issue of certificate
39 - 2.6 FAILURE IN PART
40 - 2.6.2 Theoretical and practical examinations
40 - 2.6.3 Bend tests and nick-break tests
40 - 2.6.4 Fillet break test
40 - 2.6.5 Flame cutting and gouging
40 - 2.6.6 Radiographic examination
40 - 2.6.7 Date, duration and location for re-examination or re-testing
41 - SECTION 3 WELDING SUPERVISOR CERTIFICATION
41 - 3.1 PRE-EXAMINATION REQUIREMENTS
41 - 3.2 SCOPE OF EXAMINATION
41 - 3.2.1 Type
41 - 3.2.2 Location of examination
41 - 3.2.3 Duration of an examination
41 - 3.2.4 Criteria for examination marking
42 - 3.3 EXAMINATION SYLLABUS
43 - 3.4 CERTIFICATE
43 - 3.4.1 Issue of certificate
43 - 3.4.2 Information to be shown on the certificate
43 - 3.4.3 Period of validity
43 - 3.4.4 Re-issue of certificate
43 - 3.5 FAILURE IN PART
43 - 3.5.1 Documentary evidence
43 - 3.5.2 Re-examination
43 - 3.5.3 Date, location and duration for re-examination
44 - APPENDIX A - MATERIAL GROUPS
45 - APPENDIX B - EXAMINING AUTHORITIES
47 - APPENDIX C - LIST OF STANDARDS
50 - APPENDIX D - LIST OF REFERENCED DOCUMENTS

Specifies requirements necessary for the granting of certificates to persons engaged in the operation of various welding processes used in the manufacture of boilers, pressure vessels and associated piping, as well as other applications requiring a prescribed standard in the theory and practice of welding.

This Standard specifies the requirements necessary for the granting of certificates to persons engaged in the operation of various welding processes used in the manufacture of pressure equipment such as boilers, pressure vessels and associated piping as defined in AS 1200, as well as other applications requiring a prescribed standard in the theory and practice of welding.Certification in welding is related primarily to basic welding techniques and processes and not to the parent metal of the joint.Welder certification should not be confused with welder qualification (see Clauses 1.5.45 and 1.5.46). The requirements for welder qualifications are specified in the appropriate application Standards.

Committee
ME-001
DocumentType
Standard
ISBN
0 7262 7787 8
Pages
44
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes

Amendment 2 to AS 1796-1993 see DR 97182. Under revision see DR 99161 First published in part as AS CB14, Part I-1947.AS CB14, Part II first published 1950.Second edition 1959.AS CB14, Part III first published 1959.Second edition AS CB14, Part I-1965.AS CB14, Part IV first published 1966.AS CB14, Part V first published 1969.AS CB14, Part VI first published 1971.AS CB14, Part I-1965, AS CB14, Parts II-III-1959, AS CB14, Part IV-1966, AS CB14, Part V-1969 and AS CB14, Part VI-1971 revised, amalgamated and redesignated AS 1796-1975.Second edition 1983.Third edition 1993. First published in part as AS CB14, Part I-1947. AS CB14, Part II first published 1950. Second edition 1959. AS CB14, Part III first published 1959. Second edition AS CB14, Part I-1965. AS CB14, Part IV first published 1966. AS CB14, Part V first published 1969. AS CB14, Part VI first published 1971. AS CB14, Part I-1965, AS CB14, Parts II-III-1959, AS CB14, Part IV-1966, AS CB14, Part V-1969 and AS CB14, Part VI-1971 revised, amalgamated and redesignated AS 1796-1975. Second edition 1983. Third edition 1993.

AS 1665-1992 Welding of aluminium structures
AS 1995-1977 Welding cables
AS 1167.1-1993 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS 1554.4-1989 Structural steel welding (known as the SAA Structural Steel Welding Code) - Welding of high strength quenched and tempered steels
AS 1715-1982 Selection, use and maintenance of respiratory protective devices
AS 2717.2-1988 Welding - Electrodes - Gas metal arc Aluminium and aluminium alloy
AS 1171-1998 Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures (Reconfirmed 2022)
AS 1167.2-1986 Welding and brazing - Filler metals - Filler metal for welding
AS 2576-1982 Welding consumables for build-up and wear resistance - Classification system
AS 2205.3.5-1997 Methods for destructive testing of welds in metal Tongue bend test
AS 2205.3.3-1997 Methods for destructive testing of welds in metal - Longitudinal guided bend test
AS 2062-1997 Non-destructive testing - Penetrant testing of products and components
AS 2207-1994 Non-destructive testing - Ultrasonic testing of fusion welded joints in carbon and low alloy steel
AS 1554.2-1993 Structural steel welding - Stud welding (steel studs to steel)
AS 2885-1987 Pipelines - Gas and liquid petroleum known as the SAA Pipeline Code
AS 1470-1986 Health and safety at work - Principles and practices
AS 2205.8.1-1997 Methods for destructive testing of welds in metal Longitudinal fillet shear test
AS 1336-1982 Recommended practices for eye protection in the industrial environment
AS 1485-1983 Safety and health in workrooms of educational establishments
AS 2205.3.4-1997 Methods for destructive testing of welds in metal Transverse joggle-butt wrap-around bend test
AS 1210-1989 Unfired Pressure Vessels (known as the SAA Unfired Pressure Vessels Code)
AS 2205.3.2-1997 Methods for destructive testing of welds in metal Transverse free bend test
AS 1988-1989 Welding of steel castings
AS 1337-1984 Eye protectors for industrial applications
AS 2205.6.1-1997 Methods for destructive testing of welds in metal - Weld joint hardness test
AS 2177.1-1994 Non-destructive testing - Radiography of welded butt joints in metal Methods of test
AS 1544.5-1981 Methods for impact tests on metals Assessment of fracture surface appearance of steel
AS 2083-1981 Calibration blocks and their methods of use in ultrasonic testing
AS 1817-1991 Metallic materials - Vickers hardness test
AS 2205.2.2-1997 Methods for destructive testing of welds in metal - All-weld-metal tensile test
AS 3195-1990 Approval and test specification - Portable machines for electric arc welding and allied processes
AS 3992-1992 Boilers and pressure vessels - Welding and brazing qualification
AS 1674.2-1990 Safety in welding and allied processes - Electrical
AS 2205.5.1-1997 Methods for destructive testing of welds in metal Macro metallographic test for cross-section examination
AS 1544.3-1975 Methods for impact tests on metals Charpy U-notch and keyhole notch
AS 2161-1978 Industrial safety gloves and mittens (excluding electrical and medical gloves)
AS 2717.1-1984 Welding - Electrodes - Gas metal arc Ferritic steel electrodes
AS 1966.1-1985 Electric arc welding power sources - Transformer type
AS 2205.8.2-1997 Methods for destructive testing of welds in metal Transverse fillet shear test
AS 4041-1998 Pressure piping
AS 2826-1985 Manual metal-arc welding electrode holders
AS 2205.4.1-1997 Methods for destructive testing of welds in metal Nick-break test
AS 1101.3-1987 Graphical symbols for general engineering - Welding and non-destructive examination
AS 2205.7.2-1997 Methods for destructive testing of welds in metal Dropweight fracture toughness test for nil-ductility transition temperature
AS 1558-1973 Protective clothing for welders
AS 2210-1980 Safety footwear
AS 2812-1985 Welding, brazing and cutting of metals - Glossary of terms
AS 1710-1986 Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate - Test methods and quality classification
AS 1065-1988 Non-destructive testing - Ultrasonic testing of carbon and low alloy steel forgings (Reconfirmed 2022)
AS 1816-1990 Metallic materials - Brinell hardness test
AS 1554.3-1983 Structural steel welding (known as the SAA Structural Steel Welding Code) - Welding of reinforcing steel
AS 2799-1992 Resistance welding equipment - Single-phase a.c. transformer type
AS 2211-1991 Laser safety
AS 1716-1984 Respiratory protective devices
AS 2205.2.3-1997 Methods for destructive testing of welds in metal Transverse joggle-butt tensile test
AS 3545-1988 Welding positions
AS 2203.1-1990 Cored electrodes for arc-welding - Ferritic steel electrodes
AS 2205.4.2-1997 Methods for destructive testing of welds in metal Fillet break test
AS 1210 SUPP 1-1990 Unfired Pressure Vessels - Advanced design and construction (Supplement to AS 1210-1997)
AS 1553.2-1987 Covered electrodes for welding - Low and intermediate alloy steel electrodes for manual metal-arc welding of carbon steels and low and intermediate alloy steels
AS 1815-1991 Metallic materials - Rockwell hardness test
AS 2205.7.3-1997 Methods for destructive testing of welds in metal Crack opening displacement (CTOD) fracture toughness test
AS 2205.3.1-1997 Methods for destructive testing of welds in metal Transverse guided bend test
AS 1697-1981 Gas transmission and distribution systems (known as the SAA Gas Pipeline Code)
AS 1929-1981 Non-destructive testing - Glossary of terms
AS 1966.2-1985 Electric arc welding power sources - Rotary type
AS 1554.1-1985 Structural steel welding (known as the SAA Structural Steel Welding Code) - Welding of steel structures
AS 1797-1986 Boilers - Fire-tube, shell, and miscellaneous
AS 1544.1-1977 Methods for impact tests on metals Izod
AS 4037-1999 Pressure equipment - Examination and testing (Reconfirmed 2016)
AS 2205.7.1-1997 Methods for destructive testing of welds in metal Charpy V-notch impact fracture toughness test
AS 1391-1991 Methods for tensile testing of metals
AS CB15.5-1968 The welding of steel pressure piping (known as the SAA Pipe Welding Code) Flash butt welding of steel pipes and tubes
AS 1674.1-1997 Safety in welding and allied processes Fire precautions (Reconfirmed 2016)
AS 2205.1-1997 Methods for destructive testing of welds in metal General requirements for tests
AS 1880-1976 Metric units in welding
AS 2085-1977 Magnetic particle testing media
AS 2177.2-1982 Radiography of welded butt joints in metal - Image quality indicators (IQI) and recommendations for their use
AS 1228-1997 Pressure equipment - Boilers

AS/NZS 1554.1:1995 Structural steel welding Welding of steel structures
AS 2470-1995 Steel cylinders for compressed gases - Welded - 11 kg to 150 kg
AS/NZS 3992:1998 Pressure equipment - Welding and brazing qualification
AS 2885.2-1995 Pipelines - Gas and liquid petroleum - Welding
AS 2469-1998 Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 35 kg
SAA/SNZ MP76:1997 Pressure equipment - Inspection bodies and personnel (Reconfirmed 2016)
AS/NZS 1554.5:1995 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 3577-1999 Steel cylinders for compressed gases - Welded - 150 kg to 500 kg
AS 3992-1992 Boilers and pressure vessels - Welding and brazing qualification
AS/NZS 1200:1994 Pressure equipment
AS/NZS 3509:1996 LP gas fuel vessels for automotive use
AS 4041-1992 Pressure piping
AS/NZS 1596:1997 Storage and handling of LP Gas
AS 3920.1-1993 Assurance of product quality Pressure equipment manufacture
AS 2809.3-1999 Road tank vehicles for dangerous goods - Tankers for compressed liquefiable gases
AS 1210-1997 Pressure vessels
AS 2214-1994 Certification of welding supervisors - Structural steel welding
AS 1554.1-1991 Structural steel welding (known as the SAA Structural Steel Welding Code) - Welding of steel structures
AS/NZS 1554.1:2000 Structural steel welding Welding of steel structures
AS/NZS 1554.4:1995 Structural steel welding - Welding of high strength quenched and tempered steels
AS 2470-1998 Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg

View more information
US$82.57
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.