AS 1856-2004
Current
The latest, up-to-date edition.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
07-07-2004
This Standard specifies requirements for the electrodeposited coatings of silver used for engineering purposes that may be matt, bright, or semi-bright and are not less than 98 percent silver purity. The requirements also specify thickness, quality and testing of electroplated coatings of silver on metallic and non-metallic materials for decorative, protective, electrical contact characteristics, high electrical and thermal conductivity, thermocompression bonding, wear resistance of load-bearing surfaces, spectral reflectivity, solderable surfaces and other general engineering applications.
This Standard specifies requirements for the electrodeposited coatings of silver used for engineering purposes that may be matt, bright, or semi-bright and are not less than 98 percent silver purity.The requirements also specify thickness, quality and testing of electroplated coatings of silver on metallic and non-metallic materials for decorative, protective, electrical contact characteristics, high electrical and thermal conductivity, thermocompression bonding, wear resistance of load-bearing surfaces, spectral reflectivity, solderable surfaces and other general engineering applications. NOTES: 1 The guidelines for the purchasing requirements are shown in Appendix A. 2 The means of demonstrating compliance with this Standard are shown in Appendix B. 3 Applications for the electrodeposition of silver coatings are shown in Appendix C.
Committee |
MT-009
|
DocumentType |
Standard
|
ISBN |
0 7337 6114 3
|
Pages |
28
|
ProductNote |
Reconfirmed 07/04/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/04/2017
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
First published in part as AS K161-1966.AS CK12 first published 1966.AS K161-1966 and AS CK12-1966 revised, amalgamated and redesignated AS 1856-1976.AS 1857 first published 1976.AS 1856-1976 and AS 1857-1976 revised and amalgamated as AS 1856-1991.Third edition 2004.Reconfirmed 2017. Originated in part as AS K161-1966, AS CK12-1966 and AS 1857-1976. Previous edition AS 1856-1991. Third edition 2004.
AS 2331.3.8-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Humidity test - 24 h cycle, damp heat |
AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
AS 2400.21-1986 | Packaging - Packaging of dangerous goods |
AS 2331.2.1-2001 | Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh, and analytical |
AS 1627.6-2003 | Metal finishing - Preparation and pretreatment of surfaces Chemical conversion treatment of metals (Reconfirmed 2017) |
AS 1627.5-2003 | Metal finishing - Preparation and pretreatment of surfaces Pickling (Reconfirmed 2017) |
AS 1627.2-2002 | Metal finishing - Preparation and pretreatment of surfaces Power tool cleaning (Reconfirmed 2017) |
AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
AS 1627.4-2002 | Metal finishing - Preparation and pretreatment of surfaces - Abrasive blast cleaning |
AS 1627.1-2003 | Metal finishing - Preparation and pretreatment of surfaces Removal of oil, grease and related contamination (Reconfirmed 2017) |
AS 4108-1993 | Metal finishing - Glossary of terms used in electroplating and related processes |
AS 1817.1-2003 | Metallic materials - Vickers hardness test Test method (ISO 6507-1:1997, MOD) |
AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
AS 2331.4.1-2001 | Methods of test for metallic and related coatings Physical tests - Qualitative adhesion tests (Reconfirmed 2017) |
AS 2331.3.4-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Thioacetamide anti-tarnish and porosity test |
HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
AS 4108-2005 | Metal finishing - Glossary of terms in electroplating and related processes (Reconfirmed 2017) |
AS 2331.1.6-2004 | Methods of test for metallic and related coatings Local thickness tests - Taper section method |
AS 2400.6-1986 | SAA Packaging code Paper and paperboard (Reconfirmed 2016) |
AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
AS 2483-2003 | Metal finishing - Recommended sampling plans for the inspection and testing of coatings (ISO 4519:1980, MOD) |
AS 2331.1.1-2001 | Methods of test for metallic and related coatings Local thickness tests - Micrographic examination of cross-sections |
AS 2331.1.5-2001 | Methods of test for metallic and related coatings Local thickness tests - Beta-backscatter method |
AS 4291.1-2000 | Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs |
AS/NZS 1300:2009 | Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices (Reconfirmed 2020) |
AS 3124-2002 | Approval and test specification for overhead line connector boxes (Reconfirmed 2020) |
AS 1300-1989 | Electrical equipment for coal mines - Bolted flame-proof cable coupling devices |
AS 1299-1993 | Electrical equipment for coal mines - Flameproof restrained plugs and receptacles |
AS/NZS 1299:2009 | Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV (Reconfirmed 2020) |
AS 1897-1976 | Electroplated coatings on threaded components (metric coarse series) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.