• There are no items in your cart

AS 2266-2002

Current
Current

The latest, up-to-date edition.

Carbon steel spring wire for bedding and seating
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

12-20-2002

Preview

Specifies requirements for carbon steel spring wire of round cross-section supplied in the hard-drawn condition, for the manufacture of coil springs (including helical lacing springs), square-formed springs and sinuous springs for bedding and seating used in the automotive, transport and furniture manufacturing industries.

This Standard specifies requirements for carbon steel spring wire of round cross-section, supplied in the hard-drawn condition and intended for the manufacture of coil springs (including helical lacing springs), square-formed springs and sinuous springs for bedding and seating used in the automotive, transport and furniture manufacturing industries. This Standard applies only to wire supplied in the form of coils. It does not cover the testing of wire that is supplied in mechanically straightened cut-lengths, or wire that has been straightened by the user. The Standard applies to the supply of wire only in the uncoated condition, that is, without a metallic coating. However, wire may be supplied with an optional zinc- or zinc/aluminium alloy-coated finish by explicit arrangement with the manufacturer; if such a coating is agreed, it is recommended that the requirements specifically relevant to coating in AS 1472 be adopted. NOTES: 1 Wires for mechanical springs for general engineering applications are covered by AS 1472. 2 Optional metallic coatings other than zinc or zinc/aluminium alloy, such as copper, may be available from wire manufacturers; in such cases, requirements for the coating should be agreed at the time of enquiry. 3 In this Standard the term ‘drawing’, alone or in combination, or a variation of ‘drawing’, such as ‘drawn’, is intended to embrace any other technically feasible means, such as ‘rolling’, by which cold-working of steel feedstock enables wire of round cross-section to be achieved. 4 Mechanical straightening introduces small, but significant, changes in diameter and mechanical properties (e.g. tensile strength) of as-drawn spring wire, and the degree of change varies with the straightening technique employed. 5 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A. 6 Alternative means for determining compliance with this Standard are given in Appendix B.

Committee
MT-001
DocumentType
Standard
ISBN
0 7337 4997 6
Pages
11
ProductNote
Reconfirmed 23/09/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 23/09/2016
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS 2266-1979.Second edition 1990.Third edition 2002.Reconfirmed 2016. Originated as AS 2266-1979. Previous edition AS 2266-1990. Third edition 2002.

AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
AS/NZS 1050.30:1994 Methods for the analysis of iron and steel Determination of boron content - Curcumin spectrophotometric method
AS/NZS 1050.31:1994 Methods for the analysis of iron and steel Determination of niobium content - PAR spectrophotometric method (Reconfirmed 2016)
AS 2338-2004 Preferred dimensions of wrought metal products
AS/NZS 1050.39:1994 Methods for the analysis of iron and steel Determination of chromium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS 2505.6-2002 Metallic materials Wire - Wrapping test
AS/NZS 1050.38:1994 Methods for the analysis of iron and steel Determination of vanadium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS/NZS 1050.26:1994 Methods for the analysis of iron and steel Silicon in iron and steel - Spectrophotometric method (Reconfirmed 2016)
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS/NZS 1050.16:1994 Methods for the analysis of iron and steel Determination of sulfur content - Infrared absorption method after combustion in an induction furnace (Reconfirmed 2017)
AS 2338-1980 Preferred dimensions of wrought metal products
AS/NZS 1050.28:1994 Methods for the analysis of iron and steel Vanadium in steel - Potentiometric method (Reconfirmed 2016)
AS/NZS 1050.8:1994 Methods for the analysis of iron and steel Determination of manganese content - Spectrophotometric method (Reconfirmed 2016)
AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
AS 1472-1991 Carbon steel spring wire for mechanical springs
AS/NZS 1050.20:1994 Methods for the analysis of iron and steel Determination of magnesium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS/NZS 1050.1:1996 Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis
AS/NZS 1050.14:1994 Methods for the analysis of iron and steel Determination of manganese in iron and steel - Titrimetric method
AS/NZS 1050.6:1995 Methods for the analysis of iron and steel Determination of tin content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS 1391-1991 Methods for tensile testing of metals
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS/NZS 1050.21:1994 Methods for the analysis of iron and steel Determination of cobalt content - Spectrophotometric method (Reconfirmed 2016)
AS/NZS 1050.24:1994 Methods for the analysis of iron and steel Determination of aluminium content - Spectrophotometric method (Reconfirmed 2016)
AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS/NZS 1050.2:1994 Methods for the analysis of iron and steel Determination of carbon content - Gravimetric method (Reconfirmed 2016)
AS/NZS 1050.37:1994 Methods for the analysis of iron and steel Determination of copper content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS 1472-2003 Carbon steel spring wire for mechanical springs
AS 3942-1993 Quality control - Variables charts - Guide
AS/NZS 1050.18:1994 Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016)
AS 1442-1992 Carbon steels and carbon-manganese steels - Hot-rolled bars and semifinished products
AS/NZS ISO 9004:2000 Quality management systems - Guidelines for performance improvements
AS/NZS 1050.32:1994 Methods for the analysis of iron and steel Determination of carbon content - Infrared method (Reconfirmed 2017)
AS/NZS 1050.27:1994 Methods for the analysis of iron and steel Determination of titanium content - Spectrophotometric method (Reconfirmed 2016)
AS/NZS ISO 9001:2000 Quality management systems - Requirements
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS 1442-2007 Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017)
HB 18.28-1991 Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products

AS 1472-2003 Carbon steel spring wire for mechanical springs

View more information
US$48.59
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.