AS 2578-2009
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
09-19-2019
English
12-03-2009
Specifies requirements for those characteristics of traffic signal controllers which interact with other equipment associated with road traffic signal installations, with the objective of ensuring that, as far as practicable, controllers from different manufacturers will be physically interchangeable, and that the functioning of the controller will be independent of the characteristics of externally connected equipment. It also specifies certain general requirements for the design and construction of controllers.
This Standard specifies the mechanical, electrical and functional requirements for the control equipment used for operation of road traffic signals, with the objective of ensuring that, as far as practicable - (a) controllers from different manufacturers will be physically interchangeable; and(b) controllers from different manufacturers will have functional compatibility.NOTE: The requirements of this Standard may not ensure total physical and electrical interchangeability, but should enable a replacement controller to be installed with a minimum of alteration.The Standard seeks to ensure compatibility between the electronic modules (i.e. the Logic Module, the Flasher Unit and the Site Identification Encoder) mounted in the controller housing. The Standard is necessarily prescriptive in some areas to achieve this purpose.NOTE: Compliance with this Standard may not ensure full compatibility between Logic Modules and housings of different manufacture since the method of dimming the signal displays is not specified.The Standard specifies general requirements for the design and construction of traffic signal controllers to meet the needs of users. The Standard specifies technology that has been proven in the field to provide safe and reliable operation.
| Committee |
LG-006
|
| DocumentType |
Standard
|
| ISBN |
0 7337 9308 8
|
| Pages |
172
|
| ProductNote |
Withdrawn 19-09-2019.
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes |
Originated as AS 2578-1983.Second edition 2009. Originated as AS 2578-1983. Second edition 2009.
| AS/NZS 61000.6.2:2006 | Electromagnetic compatibility (EMC) General standards - Immunity for industrial environments (Reconfirmed 2016) |
| AS 1055.2-1997 | Acoustics - Description and measurement of environmental noise Application to specific situations |
| AS/NZS 2276.2:1998 | Cables for traffic signal installations Feeder cable for vehicle detectors |
| AS/NZS 2276.1:2004 | Cables for traffic signal installations Multicore power cables (Reconfirmed 2017) |
| AS 2353-1999 | Pedestrian push-button assemblies |
| AS/NZS 2144:2002 | Traffic signal lanterns |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 60068.2.64-2003 | Environmental testing Tests - Test Fh: Vibration, broad-band random (digital control) and guidance |
| AS 61508.2-2001 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Requirements for electrical/electronic/programmable electronic safety-related systems |
| AS 60068.2.6-2003 | Environmental testing Tests - Test Fc: Vibration (sinusoidal) (Reconfirmed 2018) |
| AS/NZS 3190:2009 | Approval and test specification - Residual current devices (current-operated earth-leakage devices) |
| AS/NZS 61000.4.2:2002 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Electrostatic discharge immunity test |
| AS/NZS 61000.4.3:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| AS 60068.2.68-2003 | Environmental testing Tests - Test L: Dust and sand |
| AS 61508.4-1999 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Definition and abbreviations |
| AS/NZS 61000.4.4:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Electrical fast transient/burst immunity test |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
| AS 60068.2.66-2003 | Environmental testing Tests - Test Cx: Damp heat, steady state (unsaturated pressurized vapour) |
| AS/NZS 61000.4.16:2002 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Test for immunity to conducted common mode disturbances in the frequency range 0 Hz to 150 kHz (Reconfirmed 2013) |
| AS/NZS 1768:2007 | Lightning protection |
| AS/NZS 61000.4.34:2007 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase (IEC 61000-4-34, Ed. 1.0 (2005) MOD) |
| AS/NZS 61000.4.5:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test |
| AS 1055.1-1997 | Acoustics - Description and measurement of environmental noise General procedures |
| AS/NZS 61000.4.14:2007 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage fluctuation immunity test |
| AS/NZS 61000.4.11:2005 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11, Ed. 2.0 (2004) MOD) (Reconfirmed 2016) |
| AS/NZS 61000.4.8:2002 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Power frequency magnetic field immunity test |
| AS/NZS 61000.4.30:2007 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Power quality measurement methods |
| AS 60068.2.29-2003 | Environmental testing Tests - Test Eb and guidance: Bump |
| AS/NZS 61000.4.13:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
| AS 2703-2008 | Vehicle loop detector sensors |
| AS/NZS 61000.6.3:2007 | Electromagnetic compatibility (EMC) Generic standards - Emission standard for residential, commercial and light-industrial environments |
| AS 2700-1996 | Colour Standards for general purposes - Swatches |
| AS 60068.2.67-2003 | Environmental testing Tests - Test Cy: Damp heat, steady state accelerated test primarily intended for components |
| AS 61508.3-1999 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Software requirements |
| AS 60068.2.65-2003 | Environmental testing Tests - Test Fg: Vibration, acoustically induced |
| AS 60068.2.69-2004 | Environmental testing Tests - Test Te: Soldering - Solderability testing of electronic components for surface mount technology by the wetting balance method |
| AS 1275-1985 | Metric screw threads for fasteners (Reconfirmed 2017) |
| AS 1055.3-1997 | Acoustics - Description and measurement of environmental noise Acquisition of data pertinent to land use |
| AS/NZS 61000.4.7:2007 | Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
| AS/NZS 3100:2009 | Approval and test specification - General requirements for electrical equipment |
| AS/NZS 61000.4.27:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Unbalance, immunity test |
| AS 60068.2.61-2003 | Environmental testing Tests - Test Z/ABDM: Climate sequence |
| AS 60068.2.60-2003 | Environmental testing Tests - Test Ke: Flowing mixed gas corrosion test |
| AS 61508.1-1999 | Functional safety of electrical/electronic/programmable electronic safety-related systems - General requirements |
| AS/NZS 61000.6.4:2007 | Electromagnetic compatibility (EMC) Generic standards - Emission standard for industrial environments |
| AS/NZS 61000.6.1:2006 | Electromagnetic compatibility (EMC) Generic standards - Immunity for residential, commercial and light industrial environments (Reconfirmed 2016) |
| AS 60269.1-2005 | Low-voltage fuses - General requirements |
| AS/NZS 61000.4.1:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Overview of IEC 61000-4 series |
| AS/NZS 61000.4.6:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| AS/NZS 61000.4.15:2005 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Flickermeter - Function and design specifications |
| AS/ACIF S008-2006 | Requirements for customer cabling products |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.