AS 2610.1-1983

1 - AS 2610, Part 1-1983 SPA POOLS - PUBLIC SPAS
4 - PREFACE
5 - CONTENTS
6 - SECTION 1. SCOPE AND GENERAL
6 - 1.1 SCOPE.
6 - 1.2 REFERENCED DOCUMENTS.
6 - 1.3 DEFINITIONS.
6 - 1.3.1 Abrasion hazard
6 - 1.3.2 Air injection system
6 - 1.3.3 Backwash
6 - 1.3.4 Breakpoint chlorination
6 - 1.3.5 Capacity
6 - 1.3.6 Casual contact
6 - 1.3.7 Cutting hazard
6 - 1.3.8 Floor
6 - 1.3.9 Inlets
6 - 1.3.10 Jet inlet fittings
6 - 1.3.11 Ladder
6 - 1.3.12 Lining
6 - 1.3.13 Outlets
6 - 1.3.14 Surface skimming system
6 - 1.3.15 Pinching hazard
6 - 1.3.16 Public spa
6 - 1.3.17 Puncture hazard
6 - 1.3.18 Niche steps
6 - 1.3.19 Spa
7 - 1.3.20 Steps
7 - 1.3.21 Steps, recessed
7 - 1.3.22 Turbidity
7 - 1.3.23 Turnover
7 - 1.3.24 Walkways
7 - 1.3.25 Walls
8 - SECTION 2. REQUIREMENTS
8 - 2.1 LOCATION OF PUBLIC SPAS.
8 - 2.1.1 General.
8 - 2.1.2 Indoor Ventilation.
8 - 2.1.3 Electrical Safety.
8 - 2.2 MATERIALS.
8 - 2.2.1 General.
8 - 2.2.2 Effects of Environment.
8 - 2.2.3 Toxicity and Compatibility.
8 - 2.3 STRUCTURAL DESIGN.
8 - 2.3.1 Installation.
8 - 2.3.2 Construction.
8 - 2.4 DIMENSIONAL DESIGN.
8 - 2.4.1 Water Depth.
8 - 2.4.2 Seats.
8 - 2.4.3 Handholds.
8 - 2.4.4 Floor Slope.
8 - 2.5 MEANS OF EXIT AND ENTRY.
8 - 2.5.1 Provision of Steps, Ladders or Recessed Steps
8 - 2.5.2 Location.
8 - 2.5.3 Steps.
8 - 2.5.4 Ladders.
9 - 2.5.5 Niche Steps.
9 - 2.6 WALKWAYS FOR SPAS.
9 - 2.6.1 Provision of Walkways.
9 - 2.6.2 Surfaces and Slope.
9 - 2.6.3 Walkway Steps.
9 - 2.6.4 Drainage of Walkways.
9 - 2.7 HEATER AND TEMPERATURE REQUIRE-MENTS.
9 - 2.7.1 Heater.
9 - 2.7.2 Water Temperature.
9 - 2.8 ELECTRICAL INSTALLATION.
9 - 2.9 WATER SUPPLY.
9 - 2.9.1 Re-filling Devices.
9 - 2.9.2 Water Type.
9 - 2.10 INLETS, OUTLETS AND PIPING.
9 - 2.10.1 General.
9 - 2.10.2 Outlets.
9 - 2.10.3 Outlet Covers.
10 - 2.10.4 Water Velocities.
10 - 2.10.5 Force of Jets.
10 - 2.10.6 Piping.
10 - 2.11 CIRCULATION SYSTEMS.
10 - 2.12 SURFACE SKIMMING SYSTEMS.
10 - 2.13 FILTERS.
10 - 2.13.1 General.
10 - 2.13.2 Release of Air.
10 - 2.13.3 Filter Piping.
10 - 2.14 PUMPS AND STRAINERS.
10 - 2.14.1 General.
10 - 2.14.2 Size and Type of Pumps.
10 - 2.14.3 Motors.
11 - 2.14.4 Overload Protection.
11 - 2.14.5 Strainers.
11 - 2.15 VALVES.
11 - 2.15.1 Isolation Valves.
11 - 2.15.2 Location of Valves.
11 - 2.16 AIR INJECTION SYSTEMS.
11 - 2.16.1 Air Intake.
11 - 2.16.2 Electrical Safety.
11 - 2.17. DISINFECTANT ANDCHEMICALTREATMENT.
11 - 2.17.1 Means of Disinfecting.
11 - 2.17.2 Disinfecting Substances.
11 - 2.17.3 Testing Kits.
11 - 2.18 WASTE WATER DISPOSAL.
11 - 2.18.1 General.
11 - 2.18.2 Drainage.
11 - 2.19 SAFETY.
11 - 2.19.1 Depth Markings.
11 - 2.19.2 Points of Entry and Exit.
11 - 2.19.3 Surfaces, Edges and Protrusions.
11 - 2.19.4 Fencing.
11 - 2.19.5 Safety Notices.
12 - APPENDIX A - CHEMICAL OPERATIONAL PARAMETERS
14 - APPENDIX B - SPA HEATER SIZING FOR OUTDOOR INSTALLATIONS
15 - APPENDIX C - WALKWAY SLOPE RECOMMENDATIONS
16 - APPENDIX D - RECOMMENDED PROCEDURES FOR OPERATORS OF PUBLIC SPA POOLS