• There are no items in your cart

AS 3585-2008

Current
Current

The latest, up-to-date edition.

End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

02-13-2008

Preview

1 - AS 3585-2008 END FITTINGS FOR SYNTHETIC FLAT-WEBBING AND ROUND SLINGS
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 REFERENCED DOCUMENTS
7 - 3 DEFINITIONS
7 - 3.1 Competent person
7 - 3.2 Self-coloured
7 - 3.3 Shall
7 - 3.4 Should
7 - 3.5 Working load limit (WLL)
7 - 4 TYPES
10 - 5 MATERIAL
10 - 6 DESIGN AND MANUFACTURE
10 - 6.1 Dimensions
10 - 6.2 Forgings
10 - 6.3 Welded components
10 - 6.4 Heat treatment
11 - 6.5 Surface finish
11 - 6.6 Finishing
11 - 7 MARKING
11 - 8 MECHANICAL PROPERTIES
11 - 8.1 Strength
11 - 8.2 Permanent set
11 - 8.3 Ductility
12 - 9 TYPE TESTING OF MECHANICAL PROPERTIES
12 - 9.1 General
12 - 9.2 Test for deformation
12 - 9.3 Static tensile test
12 - 9.4 Examination for articulation and relative movement
12 - 9.5 Acceptance criteria for type tests
12 - 10 MANUFACTURING TESTS
12 - 10.1 Grade T forged steel components
12 - 10.2 Proof load test-Other fittings
12 - 10.2.1 General
13 - 10.2.2 Requirements
13 - 10.3 Static tensile test-Other fittings
13 - 10.4 Test Certificate
15 - APPENDIX A - INFORMATION THAT SHOULD BE SUPPLIED WITH ENQUIRIES AND ORDERS
16 - APPENDIX B - DETERMINATION OF WORKING LOAD LIMIT (WLL)
17 - APPENDIX C - CONDITIONS FOR APPLICATION OF TEST FORCES
18 - APPENDIX D - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
18 - D1 SCOPE
18 - D2 STATISTICAL SAMPLING
18 - D3 PRODUCT CERTIFICATION
19 - D4 SUPPLIER’S QUALITY MANAGEMENT SYSTEM
19 - D5 OTHER MEANS OF ASSESSMENT
20 - APPENDIX E - STANDARDS FOR COMPONENTS USED IN LIFTING SYSTEMS

Specifies requirements for the manufacture, marking, and testing of metal end fittings that may be attached to the ends of flat synthetic webbing to form slings complying with AS1353.1 or may be attached to synthetic fibre round slings complying with AS4497.1.

This Standard specifies requirements for metal end fittings that may be attached to the ends of flat synthetic webbing to form slings complying with AS 1353.1 or may be attached to synthetic fibre round slings complying with AS 4497.1.NOTES:1 Guidance on information that should be supplied with enquiries and orders is given in Appendix A.2 Means for demonstrating compliance with this Standard are given in Appendix D.3 Standards for components used in lifting systems are listed in Appendix E.

Committee
ME-025
DocumentType
Standard
ISBN
0 7337 8546 8
Pages
15
ProductNote
Reconfirmation Notice 01/02/2019 Reconfirmed 01/02/2019.
This standard has been reconfirmed in Australia in 2019 and remains current in New Zealand.
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS 3585-1990.
Second edition 2008.
Reconfirmed 2019. First published as AS 3585-1990. Second edition 2008.

AS 14443.1-2003 Identification cards - Contactless integrated circuit(s) cards - Proximity cards Physical characteristics (Reconfirmed 2016)
AS 2321-2006 Short-link chain for lifting purposes
AS 1666.1-1995 Wire-rope slings - Product specification
AS 2759-2004 Steel wire rope - Use, operation and maintenance
AS 1666.2-1995 Wire-rope slings - Care and use
AS/NZS ISO 9001:2000 Quality management systems - Requirements
AS 14443.4-2003 Identification cards - Contactless integrated circuit(s) cards - Proximity cards Transmission protocol (Reconfirmed 2016)
AS 1790-1984 Electroplated coatings - Cadmium on iron or steel
AS 1442-2007 Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017)
AS 1171-1998 Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures (Reconfirmed 2022)
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 2193-2005 Calibration and classification of force-measuring systems (Reconfirmed 2017)
AS 3585-1990 End fittings for flat-webbing slings
AS 2319-2001 Rigging screws and turnbuckles
AS 1138-2008 Thimbles for wire rope (Reconfirmed 2019)
AS 3777-1990 Shank hooks and large-eye hooks - Maximum 25 t
AS 2741-2002 Shackles
AS 3775.2-2004 Chain slings - Grade T - Care and use
AS 1438.1-1998 Wire-coil flat slings Product specification
AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS 2740-2001 Wedge-type sockets
AS 2318-2006 Swivels for lifting applications (Reconfirmed 2022)
AS 2841-2005 Galvanized steel wire strand (Reconfirmed 2016)
AS 1380.1-1998 Fibre-rope slings - Product specification
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS 2089-2008 Sheave blocks for lifting purposes (Reconfirmed 2019)
AS/NZS 3678:1996 Structural steel - Hot-rolled plates, floorplates and slabs
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS 1627.0-1997 Metal finishing - Preparation and pretreatment of surfaces Method selection guide (Reconfirmed 2017)
AS 4497.2-1997 Roundslings - Synthetic fibre - Care and use
AS 1353.1-1997 Flat synthetic-webbing slings Product specification (Reconfirmed 2014)
AS/NZS ISO 9004:2000 Quality management systems - Guidelines for performance improvements
AS 3775.1-2004 Chain slings - Grade T Product specification
AS 4991-2004 Lifting devices
AS 1444-2007 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017)
AS 4142.2-1993 Fibre ropes Three-strand hawser-laid and eight-strand plaited
AS 2317-1998 Collared eyebolts
AS 3549-1989 Production typing tests
AS 1627.6-2003 Metal finishing - Preparation and pretreatment of surfaces Chemical conversion treatment of metals (Reconfirmed 2017)
AS 1789-2003 Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017)
AS 2076-1996 Wire-rope grips for non-lifting applications
AS 3886-1991 Paints for steel structures - Vinyl paint - High-build
AS 1353.2-1997 Flat synthetic-webbing slings Care and use
AS 3776-2006 Lifting components for Grade T chain slings
AS 14443.3-2003 Identification cards - Contactless integrated circuit(s) - Proximity cards Initialization and anticollision (Reconfirmed 2016)
AS 1418.1-2002 Cranes, hoists and winches General requirements
AS 4497.1-1997 Roundslings - Synthetic fibre - Product specification
AS 14443.2-2003 Identification cards - Contactless integrated circuit(s) cards - Proximity cards Radio frequency power and signal interface (Reconfirmed 2016)
AS 1380.2-1998 Fibre-rope slings - Care and use
AS 1438.2-1998 Wire-coil flat slings Care and use (Reconfirmed 2014)

AS 2550.1-2011 Cranes, hoists and winches - Safe use General requirements
AS 4497:2018 Roundslings - Synthetic Fibre
AS EN 12079.2-2010 Offshore containers and associated lifting sets Lifting sets - Design, manufacture and marking (EN 12079-2:2006, MOD)
AS 1666.2-2009 Wire-rope slings Care and use (Reconfirmed 2019)
AS 3777-2008 Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019)
AS 1666.1-2009 Wire-rope slings Product specification (Reconfirmed 2019)

View more information
US$60.92
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.