• There are no items in your cart

AS 3700-2001

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Masonry structures
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-24-2021

Published date

01-01-2001

Preview

Provides designers, engineers and specifiers with the minimum requirements for the design and construction of unreinforced, reinforced and prestressed masonry, including built-in components, for use in masonry applications.

This Standard sets out minimum requirements for the design and construction of masonry, including unreinforced, reinforced and prestressed, using manufactured units of clay, calcium silicate and concrete laid in mortar, autoclaved aerated concrete (AAC) laid in thin-bed mortar, and square-dressed natural stone laid in mortar.The Standard does not give values or material properties for the design and construction of square-dressed natural stone.NOTES: 1 This Standard assumes that the structural design of masonry is entrusted to experienced structural engineers or similar appropriately qualified persons, and that the execution of such work is carried out under the direction of appropriately qualified persons who are experienced in masonry construction and who understand the structural requirements.2 The Standard does not give specific requirements for prefabricated masonry panels or masonry in composite action with steel or concrete structural members. The principles of this Standard should be followed, as far as they are applicable, for such types of construction.3 The provisions of this Standard do not include specification for design and construction of AAC laid in other than thin-bed mortar. However, for masonry so constructed the general principles of this Standard may be used.

Committee
BD-004
DocumentType
Standard
ISBN
0 7337 4173 8
Pages
204
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

Amendment 1 see DR 01346 CP. Draft Amendment 2 see DR 03362 CP First published in part as AS CA32-1963.Second edition 1967.AS CA47 first published 1969.AS CA47-1969 revised and redesignated AS 1640-1974.AS CA32-1967 revised and redesignated AS 1475.1-1977.AS 1475.2 first published 1983.AS 1640-1974, AS 1475.1-1977 and AS 1475.2-1983 revised, amalgamated and redesignated AS 3700-1988.Second edition 1998.Third edition 2001. First published in part as AS CA32-1963. Second edition 1967. AS CA47 first published 1969. AS CA47-1969 revised and redesignated AS 1640-1974. AS CA32-1967 revised and redesignated AS 1475.1-1977. AS 1475.2 first published 1983. AS 1640-1974, AS 1475.1-1977 and AS 1475.2-1983 revised, amalgamated and redesignated AS 3700-1988. Second edition 1998. Third edition 2001.

AS 1684.4-2006 Residential timber-framed construction - Simplified - Non-cyclonic areas (SEE IMPORTANT NOTE)
AS 1141.52-1995 Methods for sampling and testing aggregates Unconfined cohesion of compacted pavement materials
AS 1141.6.2-1996 Methods for sampling and testing aggregates Particle density and water absorption of coarse aggregate - Pycnometer method (Reconfirmed 2016)
AS 1449-1994 Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip
AS 1478.1-2000 Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018)
AS 1141.31-1997 Methods for sampling and testing aggregates Light particles
AS 1141.50-1998 Methods for sampling and testing aggregates Resistance to stripping of cover aggregates from binders (Reconfirmed 2016)
AS 1141.21-1997 Methods for sampling and testing aggregates Aggregate crushing value (Reconfirmed 2016)
AS 1141.20.2-2000 Methods for sampling and testing aggregates Average least dimension - Direct measurement (nominal sizes 5 mm and 7 mm)
AS 1141.5-2000 Method for sampling and testing aggregates Particle density and water absorption of fine aggregate (Reconfirmed 2016)
AS 1141.72-1996 Methods for sampling and testing of aggregates Cement content of cement stabilized materials
AS 1141.13-1995 Methods for sampling and testing aggregates Material finer than 2 micrometer
AS 1141.22-1996 Methods for sampling and testing aggregates Wet/dry strength variation
AS 1684.3-1999 Residential timber-framed construction Cyclonic areas
AS/NZS 4456.4:1997 Masonry units and segmental pavers - Methods of test - Determining compressive strength of masonry units
AS 2837-1986 Wrought alloy steels - Stainless steel bars and semi-finished products
AS 1141.25.2-1999 Methods for sampling and testing aggregates Degradation factor - Coarse aggregate
AS/NZS 2904:1995 Damp-proof courses and flashings
AS 1141.33-1997 Methods for sampling and testing aggregates Clay and fine silt (settling method)
AS 1397-2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
AS 1141.42-1999 Methods for sampling and testing aggregates Pendulum friction test
AS 1141.14-1995 Methods for sampling and testing aggregates Particle shape, by proportional calliper
AS 1141.24-1997 Methods for sampling and testing aggregates Aggregate soundness - Evaluation by exposure to sodium sulfate solution
AS 4055-2006 Wind loads for housing
AS 1141.36-1997 Methods for sampling and testing aggregates Sulfur in metallurgical slag, crushed rock or other pavement materials
AS 2758.1-1998 Aggregates and rock for engineering purposes - Concrete aggregates
AS 1170.2-1989 Minimum design loads on structures (known as the SAA Loading Code) Wind loads
AS 1141.18-1996 Methods for sampling and testing aggregates Crushed particles in coarse aggregate derived from gravel
AS/NZS 2312:1994 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS 1170.4-2007 Structural design actions Earthquake actions in Australia (Reconfirmed 2018)
AS 1141.17-1995 Methods for sampling and testing aggregates Voids in dry compacted filler
AS 1684.3-2006 Residential timber-framed construction Cyclonic areas
AS 3600-2001 Concrete structures
AS 1141-1974 Methods for sampling and testing aggregates
AS 1141.6.1-2000 Methods for sampling and testing aggregates Particle density and water absorption of coarse aggregate - Weighing-in-water method (Reconfirmed 2016)
AS/NZS 2699.1:2000 Built-in components for masonry construction Wall ties
AS 1141.51-1996 Methods for sampling and testing aggregates Unconfined compressive strength of compacted materials
AS 1141.29-1999 Methods for sampling and testing aggregates Accelerated soundness index by reflux
AS 1141.23-1995 Methods for sampling and testing aggregates Los Angeles value
AS/NZS 2699.2:2000 Built-in components for masonry construction Connectors and accessories
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 3582.3-1994 Supplementary cementitious materials for use with portland cement - Silica fume
AS 1684.2-2006 Residential timber-framed construction Non-cyclonic areas (SEE IMPORTANT NOTE)
AS 1141.0-1999 List of methods
AS 1141.2-1999 Methods for sampling and testing aggregates Basic testing equipment
AS/NZS 4456.11:1997 Masonry units and segmental pavers - Methods of test - Determining coefficients of expansion
AS 1141.32-1995 Methods for sampling and testing aggregates Weak particles (including clay lumps, soft and friable particles) in coarse aggregates
AS 1141.19-1998 Methods for sampling and testing aggregates Fine particle size distribution in road materials by sieving and decantation (Reconfirmed 2014)
AS/NZS 4456.10:1997 Masonry units and segmental pavers - Methods of test - Determining resistance to salt attack
AS 1141.20.1-2000 Methods for sampling and testing aggregates Average least dimension - Direct measurement (nominal size 10 mm and greater) (Reconfirmed 2014)
AS 1684.2-1999 Residential timber-framed construction Non-cyclonic areas
AS 1141.30-1996 Methods for sampling and testing of aggregates Coarse aggregate quality by visual comparison
AS 1141.3.1-1996 Methods for sampling and testing aggregates Sampling - Aggregates
AS 1316-1972 Masonry cement (metric units)
AS 1170.4-1993 Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads
AS 3623-1993 Domestic metal framing (Reconfirmed 2018)
AS 1141.16-1995 Methods for sampling and testing aggregates Angularity number
AS 1304-1991 Welded wire reinforcing fabric for concrete
AS 1141.15-1999 Methods for sampling and testing aggregates Flakiness index (Reconfirmed 2018)
AS 1141.70-1996 Methods for sampling and testing aggregates Lime or cement content of uncured stabilized pavement materials (EDTA method)
AS 1141.7-1995 Methods for sampling and testing aggregates Apparent particle density of filler
AS 1311-1987 Steel tendons for prestressed concrete-7-wire stress-relieved steel strand for tendons in prestressed concrete
AS 1310-1987 Steel wire for tendons in prestressed concrete
AS 1141.53-1996 Methods for sampling and testing aggregates Absorption, swell and capillary rise of compacted materials
AS 1170.3-1990 Minimum design loads on structures (known as the SAA Loading Code) - Snow loads
AS 1141.34-1997 Methods for sampling and testing aggregates Organic impurities other than sugar
AS 1141.3.3-1999 Methods for sampling and testing aggregates Sampling - Preparation of stabilized pavement materials
AS 3582.1-1998 Supplementary cementitious materials for use with portland and blended cement Fly ash
AS 1141.11-1996 Methods for sampling and testing aggregates Particle size distribution by sieving
AS 1141.12-1996 Methods for sampling and testing of aggregates Materials finer than 75 micrometre in aggregates (by washing)
AS 2870-1996 Residential slabs and footings - Construction
AS 1313-1989 Steel tendons for prestressed concrete - Cold-worked high-tensile alloy steel bars for prestressed concrete
AS 1141.3.2-1996 Methods for sampling and testing aggregates Sampling - Rock spalls, boulders and drill core
AS 1141.27-1995 Methods for sampling and testing aggregates Resistance to wear by attrition
AS 1141.26-1996 Methods for sampling and testing aggregates Secondary minerals content in basic igneous rocks
AS/NZS 4456.12:2003 Masonry units and segmental pavers and flags - Methods of test Determining coefficients of contraction (Reconfirmed 2023)
AS/NZS 4455:1997 Masonry units and segmental pavers
AS/NZS 3582.3:2002 Supplementary cementitious materials for use with portland and blended cement Amorphous silica
AS 1170.1-1989 Minimum design loads on structures (known as the SAA Loading Code) Dead and live loads and load combinations
AS 1141.35-1995 Methods for sampling and testing aggregates Sugar
AS 1303-1991 Steel reinforcing wire for concrete
AS 1141.71-1998 Methods for sampling and testing aggregates Lime or cement content of stabilized pavement materials (EDTA method)
AS 2193-2005 Calibration and classification of force-measuring systems (Reconfirmed 2017)
AS 1316-2003 Masonry cement (Reconfirmed 2016)
AS/NZS 1170.2:2002 Structural design actions Wind actions
AS 1141.8-1995 Methods for sampling and testing aggregates Water-soluble fraction of filler
AS/NZS 2699.3:2002 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS 2601-2001 The demolition of structures
AS 1141.41-1999 Methods for sampling and testing aggregates Polished aggregate friction value - Horizontal bed machine
AS/NZS 1170.1:2002 Structural design actions Permanent, imposed and other actions
AS/NZS 4671:2001 Steel reinforcing materials
AS 1141.1-1996 Methods for sampling and testing aggregates Definitions
AS/NZS 3679.1:1996 Structural steel Hot-rolled bars and sections
AS 1530.4-1997 Methods for fire tests on building materials, components and structures Fire-resistance tests of elements of building construction
AS 4055-1992 Wind loads for housing
AS 1672.1-1997 Limes and limestones Limes for building
AS 1530.4-2005 Methods for fire tests on building materials, components and structures Fire-resistance test of elements of construction
AS 2193-1978 Methods for calibration and grading of force-measuring systems of testing machines
AS/NZS 4456.10:2003 Masonry units, segmental pavers and flags - Methods of test Determining resistance to salt attack (Reconfirmed 2023)
AS 1141.40-1999 Methods for sampling and testing aggregates Polished aggregate friction value - Vertical road-wheel machine
AS/NZS 4456.12:1997 Masonry units and segmental pavers - Methods of test Determining coefficients of contraction
AS 1141.4-2000 Methods for sampling and testing aggregates Bulk density of aggregate (Reconfirmed 2014)
AS 2701-2001 Methods of sampling and testing mortar for masonry construction (Reconfirmed 2015)
AS 3582.2-2001 Supplementary cementitious materials for use with portland and blended cement Slag - Ground granulated iron blast-furnace
AS 1141.28-1999 Methods for sampling and testing aggregates Ball mill value
AS 1141.25.1-2000 Methods for sampling and testing aggregates Degradation factor - Source rock
AS 1141.37-1995 Methods for sampling and testing aggregates Iron unsoundness
AS/NZS 4456.11:2003 Masonry units, segmental pavers and flags - Methods of test Determining coefficients of expansion (Reconfirmed 2023)
AS 1302-1991 Steel reinforcing bars for concrete
AS 3972-1997 Portland and blended cements
AS 1141.20.3-2000 Methods for sampling and testing aggregates Average least dimension - Calculation (nomograph)
AS 1684.4-1999 Residential timber-framed construction, - Simplified - Non-cyclonic areas (SEE IMPORTANT NOTE)
AS/NZS 4456.4:2003 Masonry units, segmental pavers and flags - Methods of test Determining compressive strength of masonry units
AS 1684.2 N1 N2 SUPP 2-1999 Residential timber-framed construction Non-cyclonic areas - N1/N2 Supplement 2: Timber framing span tables - Wind classification N1/N2 - Seasoned softwood - Stress grade F7 (Supplement to AS 1684.2-1999)
AS/NZS 2311:2000 Guide to the painting of buildings

AS 4204-1994 Headstones and cemetery monuments
AS 1684.3-2010 Residential timber-framed construction Cyclonic areas
AS 2870-1996 Residential slabs and footings - Construction
AS 1684.2-2010 Residential timber-framed construction Non-cyclonic areas
AS/NZS 4456.0:2003 Masonry units, segmental pavers and flags - Methods of test General introduction and list of methods (Reconfirmed 2023)
AS/NZS 2904:1995 Damp-proof courses and flashings
AS/NZS 4456.4:2003 Masonry units, segmental pavers and flags - Methods of test Determining compressive strength of masonry units
AS 4425-1996 Above ground burial structures
AS 4046.7-2002 Method of testing roof tiles Determination of resistance to salt attack
AS/NZS 1100.501:2002 Technical drawing Structural engineering drawing (Reconfirmed 2014)
AS 3610-1995 Formwork for concrete
AS 1530.4-2005 Methods for fire tests on building materials, components and structures Fire-resistance test of elements of construction
AS 3958.1-2007 Ceramic tiles Guide to the installation of ceramic tiles
AS 2870-2011 Residential slabs and footings
AS 1684.2-2006 Residential timber-framed construction Non-cyclonic areas (SEE IMPORTANT NOTE)
AS 2050-2002 Installation of roof tiles
AS 1379-2007 Specification and supply of concrete (Reconfirmed 2017)
AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 4773.2-2010 Masonry in small buildings - Construction
AS 1316-2003 Masonry cement (Reconfirmed 2016)
AS 2067-2008 Substations and high voltage installations exceeding 1 kV a.c.
AS 4678-2002 Earth-retaining structures
AS 3740-2010 Waterproofing of domestic wet areas
AS 3740-2004 Waterproofing of wet areas within residential buildings
AS 4773.1-2010 Masonry in small buildings - Design
AS/NZS 2589:2007 Gypsum linings - Application and finishing
AS/NZS 2699.3:2002 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
HB 161-2005 Guide to Plastering
AS 2049-2002 Roof tiles (Reconfirmed 2015)
AS 1905.1-2005 Components for the protection of openings in fire-resistant walls Fire-resistant doorsets
AS 1562.3-2006 Design and installation of sheet roof and wall cladding Plastic (Reconfirmed 2018)
AS 1170.4-2007 Structural design actions Earthquake actions in Australia (Reconfirmed 2018)
AS 3958.2-1992 Ceramic tiles Guide to the selection of a ceramic tiling system
AS 1684.3-2006 Residential timber-framed construction Cyclonic areas

View more information
US$152.72
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.