• There are no items in your cart

AS 3750.1-1994

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

05-03-2018

Language(s)

English

Published date

01-01-1994

Preview

1 - AS 3750.1-1994 PAINTS FOR STEEL STRUCTURES - EPOXY MASTIC (TWO-PACK)-FOR RUSTED STEEL
4 - PREFACE
5 - CONTENTS
6 - SECTION 1 SCOPE AND GENERAL
6 - 1.1 SCOPE
6 - 1.2 REFERENCED DOCUMENTS
6 - 1.3 DEFINITIONS
6 - 1.3.1 Approximate match
6 - 1.3.2 Component
6 - 1.3.3 Epoxy mastic
6 - 1.3.4 Pot-life
7 - 1.4 SAFETY PRECAUTIONS
8 - SECTION 2 MATERIAL REQUIREMENTS
8 - 2.1 GENERAL
8 - 2.2 CONDITIONS OF TEST
8 - 2.3 LIQUID PAINT
8 - 2.3.1 Condition in container
8 - 2.3.2 Volume solids
8 - 2.3.3 Storage properties
8 - 2.4 SPRAY APPLICATION PROPERTIES
8 - 2.4.1 General
8 - 2.4.2 Thinning
8 - 2.4.3 Spraying technique
8 - 2.4.4 Pot-life assessment
9 - 2.5 APPLIED FILM
9 - 2.5.1 Curing and hard-dry properties
9 - 2.5.2 Colour
9 - 2.5.3 Recoating properties
9 - 2.5.4 Finish
9 - 2.5.5 Flexibility
9 - 2.5.6 Resistance to distilled water
9 - 2.5.7 Resistance to oil
10 - 2.5.8 Resistance to alkali/acid
10 - 2.5.9 Durability of the paint system
10 - 2.6 MIXING RATIO
10 - 2.7 ADDITIONAL TESTS
12 - SECTION 3 PACK A GING AN D LABELLING
12 - 3.1 PACKAGING
12 - 3.2 LABELLING
13 - APPENDIX A - PURCHASING GUIDELINES
13 - A1 GENERAL
13 - A2 INFORMATION TO BE SUPPLIED WITH THE ENQUIRY OR ORDER
14 - APPENDIX B - GUIDANCE ON THE USE AND APPLICATION OF EPOXY MASTIC PAINT
14 - B1 SCOPE
14 - B2 MANUFACTURER’S TECHNICAL DATA
14 - B3 SAFETY PRECAUTIONS
14 - B4 APPLICATION AND TYPICAL USES
15 - B5 MIXINGPROCEDURE
15 - B6 CURING CONDITIONS
15 - B7 POT-LIFE
15 - B8 TYPICAL FILM THICKNESS
15 - B9 VOLUMESOLIDS
15 - B10 RECOATING
16 - B11 STORAGE CONDITIONS
17 - APPENDIX C - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
17 - C1 SCOPE
17 - C2 STATISTICAL SAMPLING
17 - C3 PRODUCT CERTIFICATION
17 - C4 SUPPLIER’S QUALITY SYSTEM
18 - C5 OTHER MEANS OF ASSESSMENT
19 - APPENDIX D - REFERENCED DOCUMENTS
21 - APPENDIX E - PREPARATION OF TEST PANELS
21 - E1 SCOPE
21 - E2 TEST PANEL MATERIAL
21 - E2.1 Tinplate
21 - E2.2 Steel
21 - E3 PREPARATION
21 - E3.1 Tinplate
21 - E3.2 Steel
22 - APPENDIX F - DETERMINATION OF THE CURING PROPERTIES OF AN EPOXY MASTIC
22 - F1 SCOPE
22 - F2 PRINCIPLE
22 - F3 REAGENT
22 - F4 APPARATUS
22 - F4.1 Cotton wool
22 - F4.2 Scratch resistance equipment
22 - F4.3 Watch glass
22 - F5 TEST PANEL
22 - F6 PROCEDURE
23 - F7 TEST REPORT
24 - APPENDIX G - ASSESSMENT OF RESISTANCE OF AN EPOXY MASTIC TO WATER
24 - G1 SCOPE
24 - G2 PRINCIPLE
24 - G3 APPARATUS
24 - G3.1 Cotton wool
24 - G3.2 Beaker
24 - G3.3 Scratch resistance equipment
24 - G3.4 Knife blade
24 - G3.5 Straightedge
24 - G3.6 Grey scale
24 - G3.7 Gloss determination equipment
24 - G4 PROCEDURE
25 - G5 TEST REPORT
26 - APPENDIX H - ASSESSMENT OF RESISTANCE OF AN EPOXY MASTIC TO MINERAL OIL
26 - H1 SCOPE
26 - H2 PRINCIPLE
26 - H3 REAGENTS
26 - H3.1 Mineral oil
26 - H3.2 Mineral turpentine
26 - H4 APPARATUS
26 - H4.1 Cotton wool
26 - H4.2 Beaker
26 - H4.3 Scratch resistance equipment
26 - H4.4 Temperature control apparatus
26 - H4.5 Knife blade
26 - H4.6 Straightedge
26 - H4.7 Grey scale
26 - H4.8 Gloss determination equipment
26 - H5 PROCEDURE
27 - H6 TEST REPORT
28 - APPENDIX I - ASSESSMENT OF RESISTANCE OF AN EPOXY MASTIC TO ALKALI AND ACID
28 - I1 SCOPE
28 - I2 PRINCIPLE
28 - I3 REAGENTS
28 - I3.1 Sodium hydroxide solution (20%(m/V))
28 - I3.2 Sulfuric acid (rho20 1260 kg/m3)
28 - I4 APPARATUS
28 - I4.1 Cotton wool
28 - I4.2 Beaker
28 - I4.3 Scratch resistance equipment
28 - I4.4 Knife blade
28 - I4.5 Straightedge
29 - I5 PROCEDURE
29 - I6 TEST REPORT
30 - APPENDIX J - PROCEDURE FOR TESTING DURABILITY OF AN EPOXY MASTIC
30 - J1 SCOPE
30 - J2 PRINCIPLE
30 - J3 APPARATUS
30 - J3.1 Exposure rack
30 - J3.2 Microscope or magnifying device
30 - J3.3 Reference standards
30 - J4 PROCEDURE
30 - J5 REPORT
31 - APPENDIX K - ADDITIONAL TESTS
31 - K1 SCOPE
31 - K2 CONSISTENCY
31 - K3 GLOSS

Provides requirements for two-component, high-build, high solids, epoxy mastic paint for the protection of iron and steel against exterior atmospheric corrosion.

This Standard specifies requirements for a two-component, high-build, high-solids, epoxy mastic for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment. It is intended primarily for use on imperfectly prepared surfaces, i.e. surfaces which have been cleaned only by hand or power tool to the extent that bare steel areas with residual rust and some previously applied paint of any type are still present. Paint specified in this Standard is described in AS 2312 as Paint Reference 32. This product is generally pigmented with aluminium, however, it may be produced in a restricted range of colours. It is designed primarily for use as a single coat, high-build, self priming finish.NOTES:1 This paint may be used as detailed for system SP3, MP8A in AS 2312.2 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of epoxy paints is contained in Appendix B.4 Alternative methods for determining compliance with this Standard are given in Appendix C.

Committee
CH-003
DocumentType
Standard
ISBN
0 7262 8393 2
Pages
26
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published as AS 3750-1994.

AS/NZS 1580.457.1:1996 Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013)
AS 2508.8.006-1992 Safe storage and handling information card - Sodium hydroxide (solid and solution) (caustic soda)
AS 1580.211.2-1980 Paints and related materials - Methods of test Ease of manual re-incorporation
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 2854-1986 Tinplate cans for general use
AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS 3530-1988 Solvents - Mineral turpentine and white spirit
AS 1580.108.2-1993 Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge
AS 1580.454.1-1992 Paints and related materials - Methods of test Resistance to mineral oil
AS 1580.403.1-1981 Paints and related materials - Methods of test Scratch resistance
AS 1580.481.3-2002 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013)
AS 1627.4-1989 Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning
AS 1580.103.1-1980 Paints and related materials - Methods of test Preliminary examination and preparation for testing
AS 1517-1991 Tinplate and blackplate
AS/NZS 1580.481.1.8:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013)
AS 2905-1986 Steel drums
AS 1580.105.2-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS 2854-2004 Tinplate cans for general use
AS/NZS 1580.101.1:1999 Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013)
AS 1580.104.1-1992 Paints and related materials - Methods of test Recommended materials for test panels
AS 1580.601.1-1975 Paints and related materials - Methods of test Colour - Visual comparison
AS/NZS 1580.404.1:1997 Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013)
AS 2312-1984 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS 1580.454.1-2002 Paints and related materials - Methods of test Resistance to mineral oil and other organic liquids
AS 1627.2-2002 Metal finishing - Preparation and pretreatment of surfaces Power tool cleaning (Reconfirmed 2017)
AS/NZS 1580.103.1:1995 Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013)
AS/NZS 1580.481.1.6:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013)
AS 1580.452.2-2002 Paints and related materials - Methods of test Resistance to corrosion - Salt droplet test
AS/NZS 1580.601.1:1995 Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013)
AS/NZS 1580.403.1:1999 Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013)
AS/NZS 1580.211.2:1995 Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013)
AS 2508.3.016-1982 Safe storage and handling information card - Methyl isobutyl ketone (MIBK)
AS 1580.602.1-1975 Paints and related materials - Methods of test Visual assessment of gloss
AS/NZS 2310:2002 Glossary of paint and painting terms (Reconfirmed 2016)
AS/NZS 1580.481.1.9:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013)
HB 18.44-1991 Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products
AS 1580.481.3-1992 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates
AS/NZS 1580.602.2:1995 Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013)
AS 1580.205.4-1981 Paints and related materials - Methods of test Application properties - Airless spraying
AS 1580.404.1-1981 Paints and related materials - Methods of test Recoating properties
AS 1580.205.2-1981 Paints and related materials - Methods of test Application properties - Conventional air spraying
AS 2508.8.010-1990 Safe storage and handling information cards for hazardous materials - Sulfuric acid (up to 98% m/m)
AS 1580.105.1-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning
AS 1627.7-1988 Metal finishing - Preparation and pretreatment of surfaces - Hand tool cleaning of metal surfaces
AS 1580.603.1-2002 Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013)
AS 1580.602.2-1974 Paints and related materials - Methods of test Specular gloss
AS 1580.402.1-1992 Paints and related materials - Methods of test Bend test
AS 1580.603.1-1992 Paints and related materials - Methods of test Finish
AS 1627.9-1989 Metal finishing - Preparation and pretreatment of surfaces - Pictorial surface preparation standards for painting steel surfaces
AS/NZS 1580.104.1:2000 Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013)
AS 1580.101.5-1986 Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled
AS/NZS 1580.481.1.10:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013)
AS/NZS 1580.205.2:1997 Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013)
AS 1580.401.5-2002 Paints and related materials - Methods of test Hard dry condition - Sanding test
AS 1580.401.5-1993 Paints and related materials - Methods of test Hard dry condition - Sanding test
AS 1580.301.2-1990 Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013)
AS 1627.2-1989 Metal finishing - Preparation and pretreatment of surfaces - Power tool cleaning
AS 1580.481.1.6-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion
AS 1580.457.1-1988 Paints and related materials - Methods of test Resistance to natural weathering
AS/NZS 1580.108.1:1994 Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013)
AS 1580.402.1-2003 Paints and related materials - Methods of test Bend test
AS/NZS 1580.101.5:1999 Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013)
AS 1580.481.1.8-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking
AS 1580.108.2-2004 Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge (Reconfirmed 2019)
AS 2310-1980 Glossary of paint and painting terms
AS 3904.1-1987 Quality management and quality system elements Guidelines
AS 1580.452.2-1992 Paints and related materials - Methods of test resistance to corrosion - Salt droplet test
AS 1580.408.2-2004 Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019)
AS 1580.408.2-1993 Paints and related materials - Methods of test Adhesion - Knife test
AS 1580.108.1-1980 Paints and related materials - Methods of test Determination of dry film thickness on iron and steel substrates (permanent magnet instruments)
AS 1580.105.2-1993 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS/NZS 1580.211.1:1995 Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013)
AS 2905-2005 Steel drums
AS 1580.211.1-1980 Paints and related materials - Methods of test Degree of settling
AS 1580.481.1.9-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering
AS 1580.101.1-1986 Paints and related materials - Methods of test Air drying conditions
AS 1580.105.1-1992 Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning
AS/NZS 1580.205.4:1998 Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013)
AS 1627.9-2002 Metal finishing - Preparation and pretreatment of surfaces Pictorial surface preparation standards for painting steel surfaces (Reconfirmed 2017)
AS 3900.1-1987 Quality management and quality assurance Standards Guidelines for selection and use

AS 1580.481.0-2003 Paints and related materials - Methods of test Coatings - Guide to assessing paint systems exposed to weathering conditions
AS 3700-1998 Masonry structures
AS/NZS 2699.3:2000 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS/NZS 2699.3:2002 Built-in components for masonry construction Lintels and shelf angles (durability requirements)

View more information
US$69.34
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.