AS 3786-1993
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
04-13-1993
Specifies the requirements for the design and performance of electrically operated smoke alarms containing detection and alarm facilities. It also allows, but does not require, for the inclusion within the smoke alarm facilities for inter-connection with other units or accessories. Where such facilities are included, the Standard specifies requirements for the connection interface. It is not intended that this interface be used for connection to remote monitoring stations. The Standard applies to smoke alarms for installation within residential accommodation where connection to remote monitoring is not required.
This Standard specifies requirements for the design and performance of electrically operated smoke alarms containing both detection and alarm facilities.This Standard allows, although it does not require, the inclusion within the smoke alarm of facilities for interconnection with other similar units, or accessories. Where such facilities are included, this Standard specifies requirements for the connection interface. However, such an interface is not intended for connection to fire control stations.This Standard applies to smoke alarms intended for installation within residential accommodation where connection to fire control stations is not required.
| Committee |
FP-002
|
| DocumentType |
Standard
|
| ISBN |
0 7262 8098 4
|
| Pages |
15
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
Amendment 3 see DR 98255. Draft Amendment 4 see DR 02432 CP First published as AS 3786-1990.Second edition 1993. First published as AS 3786-1990. Second edition 1993 Reissued incorporating Amendment No. 1 (April 1995) Reissued incorporating Amendment No. 2 (December 1995) Reissued incorporating Amendment No. 3 (November 2001) Reissued incorporating Amendment No. 4 (April 2004)
| AS 2362.6-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Static discharge test |
| AS 3000-1986 | Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules) |
| AS 2362.19-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Dust test |
| AS 2362.11-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Damp heat test |
| AS 2362.22-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Sound pressure level test |
| AS 2362.20-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Overload test |
| AS 3100-1990 | Approval and test specification - General requirements for electrical equipment |
| AS 2362.5-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Insulation resistance test |
| AS 2362.20-2002 | Fire detection, warning, control and intercom systems - Methods of test Overload test (Reconfirmed 2016) |
| AS 1670.6-1997 | Fire detection, warning, control and intercom systems - System design, installation and commissioning Smoke alarms |
| AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
| AS 2362.4-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Voltage stability test |
| AS 2362.12-2002 | Fire detection, warning, control and intercom systems Methods of test - Dry heat test (Reconfirmed 2016) |
| AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
| AS/NZS 3100:2002 | Approval and test specification - General requirements for electrical equipment |
| AS 2484-1981 | Fire - Glossary of terms relating to fire tests |
| AS 2362.21-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Endurance test |
| AS 2362.17-2001 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Sensitivity test (Reconfirmed 2016) |
| AS 2362.12-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Dry heat test |
| AS 2362.13-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Corrosion test |
| AS 2362.22-2002 | Fire detection, warning, control and intercom systems Methods of test - Sound pressure level test (Reconfirmed 2016) |
| AS 2362.10-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Low temperature test |
| AS 2362.17-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Sensitivity test |
| AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
| AS 2362.9-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - High frequency disturbance test |
| AS 1670-1986 | Automatic fire detection and alarm systems - System design, installation, and commissioning |
| AS 2362.10-2002 | Fire detection, warning, control and intercom systems - Methods of test Low temperature test (Reconfirmed 2016) |
| AS 2362.8-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Impulse voltage withstand test |
| AS 2484.2-1991 | Fire - Glossary of terms Fire protection and firefighting equipment |
| AS 2362.11-2002 | Fire detection, warning, control and intercom systems Methods of test - Damp heat test |
| AS 2362.21-2002 | Fire detection, warning, control and intercom systems Methods of test - Endurance test (Reconfirmed 2016) |
| AS 2484.1-1990 | Fire - Glossary of terms Fire tests (Reconfirmed 2016) |
| AS 1670.2-1997 | Fire detection, warning, control and intercom systems - System design, installation and commissioning - Local fire |
| AS 2362.18-2002 | Fire detection, warning, control and intercom systems Methods of test - Air velocity stability test (Reconfirmed 2016) |
| AS 2362.7-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Electromagnetic interference test |
| AS 2362.13-2002 | Fire detection, warning, control and intercom systems Methods of test - Corrosion test (Reconfirmed 2016) |
| AS 2362.15-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Vibration test |
| AS 1670.1-2004 | Fire detection, warning, control and intercom systems - System design, installation and commissioning Fire |
| AS 2362.18-1993 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Air velocity stability test |
| AS 2362.19-2002 | Fire detection, warning, control and intercom systems Methods of test - Dust test (Reconfirmed 2016) |
| AS 2362.15-2002 | Fire detection, warning, control and intercom systems Methods of test - Vibration test (Reconfirmed 2016) |
| AS 2546.1-1982 | Printed boards General requirements and test methods |
| AS 2118.5-1995 | Automatic fire sprinkler systems - Domestic |
| AS 1851.15-1997 | Maintenance of fire protection equipment - Local fire alarm systems |
| AS 1603.11-2010 | Automatic fire detection and alarm systems Visual warning devices |
| AS 4226-1994 | Guidelines for safe housing design |
| AS 1603.17-2011 | Automatic fire detection and alarm systems Warning equipment for people with hearing impairment |
| AS 1670.6-1997 | Fire detection, warning, control and intercom systems - System design, installation and commissioning Smoke alarms |
| AS 4332-2004 | The storage and handling of gases in cylinders (Reconfirmed 2016) |
| AS 4428.9-2006 | Fire detection, warning, control and intercom systems - Control and indicating equipment - Requirements for wire-free alarm zone circuits |
| AS 2118.4-1995 | Automatic fire sprinkler systems - Residential |
| AS 1670.2-1997 | Fire detection, warning, control and intercom systems - System design, installation and commissioning - Local fire |
| AS 2118.5-2008 | Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020) |
| AS 4332-1995 | The storage and handling of gases in cylinders |
| AS 1670.1-2004 | Fire detection, warning, control and intercom systems - System design, installation and commissioning Fire |
| AS 4428.9-1996 | Fire detection, warning, control and intercom systems - Control and indicating equipment - Requirements for wire-free alarm zone circuits |
| HB 46-1993 | Guide to residential fire safety |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.