• There are no items in your cart

AS 4089-1993

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Priming paint for steel - Single component - General purpose
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

05-03-2018

Language(s)

English

Published date

01-01-1993

Preview

1 - AS 4089:1993 PRIMING PAINT FOR STEEL - SINGLE COMPONENT - GENERAL PURPOSE
4 - PREFACE
4 - CONTENTS
5 - 1 SCOPE
5 - 2 REFERENCED DOCUMENTS
5 - 3 DEFINITIONS
5 - 4 SAFETY REQUIREMENTS
5 - 5 MATERIAL REQUIREMENTS
5 - 5.1 Composition
5 - 5.2 Conditions of test
5 - 5.3 Liquid paint
5 - 5.3.1 Condition in container
5 - 5.3.2 Volume solids
6 - 5.3.3 Storage properties
6 - 5.3.3.1 Degree of settling
6 - 5.3.3.2 Re-incorporation after storage
6 - 5.4 Application properties
6 - 5.4.1 General
6 - 5.4.2 Brushing
6 - 5.4.3 Rolling
6 - 5.4.4 Spraying
6 - 5.5 Applied film
6 - 5.5.1 Surface drying time
6 - 5.5.2 Hard-dry time
6 - 5.5.3 Recoating properties
6 - 5.5.4 Adhesion to substrate
6 - 5.5.5 Resistance to weathering
6 - 5.5.6 Salt droplet test
6 - 6 PACKAGING
7 - 7 LABELLING
8 - APPENDIX A - PURCHASING GUIDELINES
8 - A1 SCOPE
8 - A2 GENERAL
8 - A3 INFORMATION TO BE SUPPLIED WITH THE ENQUIRY OR ORDER
9 - APPENDIX B - INFORMATION ON THE USE AND APPLICATION OF PRIMERS
9 - B1 SCOPE
9 - B2 MANUFACTURER’S TECHNICAL DATA
9 - B3 SAFETY PRECAUTIONS
9 - B4 APPLICATION AND USE
10 - APPENDIX C - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
10 - C1 SCOPE
10 - C2 STATISTICAL SAMPLING
10 - C3 PRODUCT CERTIFICATION
10 - C4 SUPPLIER’S QUALITY SYSTEM
10 - C5 OTHER MEANS OF ASSESSMENT
11 - APPENDX D - LIST OF REFERENCED DOCUMENTS
12 - APPENDIX E - COATING OF TEST PANELS FOR TESTING OF RESISTANCE TO WEATHERING
12 - E1 SCOPE
12 - E2 TEST PANEL MATERIAL
12 - E3 COATING OF PANELS

Specifies requirements for single-component, general purpose priming paints used for the protection of iron and steel against atmospheric conditions.

This Standard sets out requirements for single-component, general purpose priming paints for the protection of iron and steel against atmospheric corrosion. The primers are intended to be applied by brush and roller or by spray. The Standard deals with primers that are surface-dry within 6 h, and may be overcoated after 16 h.The primer is intended as a first coat on steel, under alkyd topcoats such as Types 17, 19 and 20 paints, and water-borne topcoats such as Type 21 paint, as specified in AS 2312.NOTES:1 Solvent-borne primers as described in this Standard comply with the requirements of Types 4 and 5 paint, in accordance with AS 2312.2 Appendix A provides recommendations on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of steel primers is given in Appendix B.4 Alternative means for determining compliance with this Standard are given in Appendix C.

Committee
CH-003
DocumentType
Standard
ISBN
0 7262 7943 9
Pages
8
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published as AS 4089-1993.

AS 1580.205.1-1981 Paints and related materials - Methods of test Application properties - Brushing
AS 1580.481.1.8-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking
AS 1580.481.1.9-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering
AS 1580.101.5-1986 Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled
AS 2312-1984 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS 3730.6-2006 Guide to the properties of paints for buildings Solvent-borne - Interior/exterior - Full gloss enamel (Reconfirmed 2016)
AS 1580.452.2-1992 Paints and related materials - Methods of test resistance to corrosion - Salt droplet test
AS/NZS 1580.205.3:1997 Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013)
AS/NZS 1580.103.1:1995 Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013)
AS/NZS 1580.481.1.6:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013)
AS 2310-1980 Glossary of paint and painting terms
AS 1580.205.3-1981 Paints and related materials - Methods of test Application properties - Roller coating
AS 1580.481.1.10-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling
AS/NZS 1580.211.2:1995 Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013)
AS/NZS 1580.481.1.9:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013)
AS 1580.481.3-2002 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013)
AS/NZS 1580.404.1:1997 Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013)
AS 1580.105.2-1993 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS/NZS 1580.401.1:1999 Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013)
AS 1580.452.2-2002 Paints and related materials - Methods of test Resistance to corrosion - Salt droplet test
AS 1580.457.1-1988 Paints and related materials - Methods of test Resistance to natural weathering
AS 3904.1-1987 Quality management and quality system elements Guidelines
AS 1580.103.1-1980 Paints and related materials - Methods of test Preliminary examination and preparation for testing
AS 3900.1-1987 Quality management and quality assurance Standards Guidelines for selection and use
AS 1580.101.1-1986 Paints and related materials - Methods of test Air drying conditions
AS 1580.205.4-1981 Paints and related materials - Methods of test Application properties - Airless spraying
AS 1580.481.1.6-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion
AS 2905-2005 Steel drums
AS 1580.401.5-1993 Paints and related materials - Methods of test Hard dry condition - Sanding test
AS 1580.481.3-1992 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates
AS 1580.205.2-1981 Paints and related materials - Methods of test Application properties - Conventional air spraying
AS 1580.404.1-1981 Paints and related materials - Methods of test Recoating properties
AS/NZS 1580.211.1:1995 Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013)
AS 1580.401.1-1981 Paints and related materials - Methods of test Surface dry condition
AS/NZS 2310:2002 Glossary of paint and painting terms (Reconfirmed 2016)
AS 2905-1986 Steel drums
AS 2854-2004 Tinplate cans for general use
AS 1580.104.1-1992 Paints and related materials - Methods of test Recommended materials for test panels
AS/NZS 1580.457.1:1996 Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013)
AS 1580.408.4-2004 Paints and related materials - Methods of test Adhesion (crosscut) (Reconfirmed 2019)
AS 1580.211.2-1980 Paints and related materials - Methods of test Ease of manual re-incorporation
AS/NZS 1580.481.1.7:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013)
AS/NZS 1580.481.1.8:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013)
AS/NZS 1580.104.1:2000 Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013)
AS/NZS 1580.205.2:1997 Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013)
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 2854-1986 Tinplate cans for general use
AS 1580.408.4-1993 Paints and related materials - Methods of test Adhesion (cross-cut)
AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS 1580.401.5-2002 Paints and related materials - Methods of test Hard dry condition - Sanding test
AS 1580.301.2-1990 Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013)
AS/NZS 1580.101.5:1999 Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013)
AS/NZS 1580.481.1.10:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013)
AS/NZS 1580.205.4:1998 Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013)
HB 18.44-1991 Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products
AS 3730.6-1991 Guide to the properties of paints for buildings Solvent-borne - Exterior - Full gloss enamel
AS 1580.105.2-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS/NZS 1580.205.1:1997 Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013)
AS/NZS 1580.101.1:1999 Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013)
AS 1580.481.1.7-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking
AS 1580.211.1-1980 Paints and related materials - Methods of test Degree of settling

AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS/NZS 2280:2004 Ductile iron pipes and fittings
AS/NZS 3750.7:1994 Paints for steel structures - Aluminium paint
AS/NZS 2312:1994 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS/NZS 2280:1999 Ductile iron pressure pipes and fittings

View more information
US$34.90
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.