AS 4431:2019
Current
The latest, up-to-date edition.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
03-05-2019
Specifies safe working provisions and practices for those responsible for, and involved in, new lift installations in new liftwells.
This Standard specifies safe working provisions and practices for those responsible for, and involved in, new lift installations in new liftwells.
NOTE: It is intended that this Standard be supported by training, and documented installation procedures.
The requirements relate to the safety of persons when entering and leaving the work area on a lift installation and while working there; they also relate to the safety of others in the vicinity, whether working or not, who may be endangered by the actions of those working on lifts.
NOTE: The Standard that applies to a particular type of lift will specify additional requirements.
Committee |
ME-004
|
DocumentType |
Standard
|
ISBN |
978 1 76072 399 6
|
Pages |
25
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
Originated as AS/NZS 4431:1996.
Revised and designated as AS 4431:2019. Originated as AS/NZS 4431:1996. Revised and designated as AS 4431:2019.
AS 4024.3406:2018 | Safety of machinery Safety of packaging machines - Pallet wrapping machines |
AS/NZS 4024.1401:2014 | Safety of machinery Ergonomic principles - Design principles - Terminology and general principles |
AS 4024.3001-2009 | Safety of machinery Materials forming and shearing - Mechanical power presses |
AS/NZS 4024.1302:2014 | Safety of machinery Risk assessment - Reduction of risks to health from hazardous substances emitted by machinery - Principles and specifications for machinery manufacturers |
AS/NZS 1576.4:2013 | Scaffolding Suspended scaffolding |
AS/NZS 4024.1601:2014 | Safety of machinery Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guards |
AS/NZS 4024.1604:2014 | Safety of machinery - Design of controls, interlocks and guarding - Emergency stop - Principles for design |
AS 4024.2802:2017 | Safety of machinery Application of protective equipment to detect the presence of persons |
AS 4024.3201:2018 | Safety of machinery Plastics and rubber machines - Blow moulding machines - Safety requirements |
AS 1735.1:2016 | Lifts, escalators and moving walks General requirements |
AS 4024.3410:2018 | Safety of machinery Safety of packaging machines - General Requirements |
AS 4024.1603-2006 | Safety of machinery Design of controls, interlocks and guards - Prevention of unexpected start-up (Reconfirmed 2014) |
AS 4024.3407:2018 | Safety of machinery Safety of packaging machines - Group and secondary packaging machines |
AS 4024.2601-2008 | Safety of machinery Design of controls, interlocks and guarding - Two-hand control devices - Functional aspects and design principles |
AS 4024.3404:2018 | Safety of machinery Safety of packaging machines - Palletisers and depalletisers |
AS 4024.2501:2017 | Safety of machinery Hygiene requirements for the design of machinery |
AS 4024.1501-2006 | Safety of machinery Design of safety related parts of control systems - General principles for design (Reconfirmed 2014) |
AS/NZS 4024.1303:2014 | Safety of machinery Risk assessment - Practical guidance and examples of methods |
AS 4024.3002-2009 | Safety of machinery Materials forming and shearing - Hydraulic power presses |
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 4024.1201:2014 | Safety of machinery General principles for design - Risk assessment and risk reduction |
AS 4024.4-1998 | Safeguarding of machinery Installation and commissioning requirements for electro-sensitive systems - Pressure-sensitive devices (Reconfirmed 2016) |
AS/NZS 4024.1503:2014 | Safety of machinery Safety-related parts of control systems - General principles for design |
AS/NZS 4024.1901:2014 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - General principles for human interactions with displays and control actuators |
AS/NZS 4024.1703:2014 | Safety of machinery Human body measurements - Principles for determining the dimensions required for access openings |
AS/NZS 4024.1906:2014 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for the location and operation of actuators |
AS/NZS 4024.1904:2014 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for visual, auditory and tactile signals |
AS/NZS 3012:2010 | Electrical installations - Construction and demolition sites |
AS/NZS 4024.3614:2015 | Safety of machinery Conveyors - Mobile and transportable conveyors |
AS/NZS 4024.1803:2014 | Safety of machinery - Safety distances and safety gaps - Minimum gaps to prevent crushing of parts of the human body |
AS/NZS 4024.3610:2015 | Safety of machinery Conveyors - General requirements |
AS/NZS 4024.3612:2015 | Safety of machinery Conveyors - Chain conveyors and unit handling conveyors |
AS/NZS 4024.1902:2014 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Displays |
AS/NZS 3190:2016 | Approval and test specification - Residual current devices (current operated earth-leakage devices) |
AS 4024.3401:2018 | Safety of machinery Safety of packaging machines - Terminology and classification of packaging machines and associated equipment |
AS/NZS 4024.1704:2014 | Safety of machinery Human body measurements - Anthropometric data |
AS/NZS 4024.1702:2014 | Safety of machinery Human body measurements - Principles for determining the dimensions required for openings for whole body access into machinery |
AS 4024.2801:2017 | Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body |
AS/NZS 4024.1100:2014 | Safety of machinery Application guide |
AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
AS 1418.7-1999 | Cranes (including hoists and winches) Builders hoists and associated equipment |
AS 4024.3403:2018 | Safety of machinery Safety of packaging machines - Form, fill and seal machines |
AS 4024.3302:2017 | Safety of machinery Robots and robotic devices - Safety requirements for industrial robots - Robot systems and integration |
AS 4024.3301:2017 | Safety of machinery Robots and robotic devices - Safety requirements for industrial robots - Robots |
AS 4024.3101-2008 | Safety of machinery Materials cutting - Milling machines (including boring machines) - Safety requirements (Reconfirmed 2018) |
AS 4024.3405:2018 | Safety of machinery Safety of packaging machines - Wrapping machines |
AS 4024.1502-2006 | Safety of machinery Design of safety related parts of control systems - Validation (Reconfirmed 2014) |
AS 4024.3303:2017 | Safety of machinery Robots and robotic devices - Collaborative robots |
AS/NZS 4024.3611:2015 | Safety of machinery Conveyors - Belt conveyors for bulk materials handling |
AS 1657:2018 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
AS/NZS 4024.1801:2014 | Safety of machinery Safety distances to prevent danger zones being reached by upper and lower limbs |
AS 1418.16-1997 | Cranes (including hoists and winches) Mast climbing work platforms |
AS/NZS 4024.1701:2014 | Safety of machinery - Human body measurements - Basic human body measurements for technological design |
AS/NZS 1576.1:2010 | Scaffolding General requirements |
AS/NZS 4024.1905:2014 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for marking |
AS 4024.3408:2018 | Safety of machinery Safety of packaging machines - Strapping machines |
AS/NZS 4024.1903:2014 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Control actuators |
AS/NZS 4024.1602:2014 | Safety of machinery Interlocking devices associated with guards - Principles for design and selection |
AS/NZS 4024.1907:2014 | Safety of machinery Displays, controls, actuators and signals - System of auditory and visual danger and information signals |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.