AS 4728-2005
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-30-2017
01-01-2005
RECONFIRMATION NOTICETechnical Committee ME-001 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 13 October 2015.The following are represented on Technical Committee ME-001:Australasian Corrosion AssociationAustralasian Institute of Engineer SurveyorsAustralian Aluminium CouncilAustralian Building Codes BoardAustralian Chamber of Commerce and IndustryAustralian Industry GroupAustralian Institute for the Certification of Inspection PersonnelAustralian Institute of EnergyAustralian Institute of PetroleumBureau of Steel Manufacturers of AustraliaDepartment of Justice and Attorney General (QLD)Electricity Engineers Association (New Zealand)Energy Networks AssociationEngineers AustraliaInstitution of Professional Engineers New ZealandMaterials AustraliaNational Association of Testing Authorities AustraliaNew Zealand Heavy Engineering Research AssociationNew Zealand Manufacturers and Exporters AssociationSafeWork NSWWelding Technology Institute of AustraliaWorksafe Division, Department of Commerce, Western AustraliaWorksafe New ZealandWorkSafe Victoria
This Standard specifies requirements for three grades of electric resistance welded (ERW) carbon and carbon manganese steel pipe suitable for some pressure purposes. The three grades are designated as 200L0, 240L0 and 290L0, with an outside diameter up to and including 165.1mm.It is intended that material made to this Standard be used in ordinary fluid service where a pipe of higher grade than AS1074 is desirable. It is suitable for pressure service to Classes 2A, 2P and 3 of AS4041, and to some other standards.Where intended for pressure piping or equipment service, requirements and restrictions in the applicable design and application standards apply. AS4041, AS1210, and other similar standards impose minimum thickness or other criteria which may preclude the use of some pipes manufactured to the specifications of this Standard. Particular note should be taken of requirements for minimum wall thickness under threads specified in AS4041, and industry requirements for LP Gas and Anhydrous Ammonia service. Appendix B contains the material properties and design parameters to be applied with this Standard and AS4041.NOTES:1 For guidelines on information to be supplied at the time of enquiry or order, see AppendixC.2 Alternative means for verifying compliance with this Standard are given in AppendixD.3 The standard allows for optional hydrostatic testing, at the purchaser's request, where required for certain pressure equipment applications.
Committee |
ME-001
|
DocumentType |
Standard
|
ISBN |
0 7337 6950 0
|
Pages |
24
|
ProductNote |
Withdrawn 20-10-2016.Reconfirmed 27/05/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 27/05/2016
|
PublisherName |
Standards Australia
|
Status |
Withdrawn
|
Supersedes |
First published as AS4728-2005.Reconfirmed 2016. First published as AS 4728-2005.
AS/NZS 1050.39:1994 | Methods for the analysis of iron and steel Determination of chromium content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS/NZS 1050.24:1994 | Methods for the analysis of iron and steel Determination of aluminium content - Spectrophotometric method (Reconfirmed 2016) |
AS 1050.25-1986 | Methods for the analysis of iron and steel Determination of lead content (flame atomic absorption spectrometric method) |
AS 1050.19-1988 | Methods for the analysis of iron and steel Determination of nickel content - Spectrophotometric method |
AS/NZS 1050.31:1994 | Methods for the analysis of iron and steel Determination of niobium content - PAR spectrophotometric method (Reconfirmed 2016) |
AS 4041-1998 | Pressure piping |
AS/NZS 1050.28:1994 | Methods for the analysis of iron and steel Vanadium in steel - Potentiometric method (Reconfirmed 2016) |
AS/NZS 1050.30:1994 | Methods for the analysis of iron and steel Determination of boron content - Curcumin spectrophotometric method |
AS 1391-2005 | Metallic materials - Tensile testing at ambient temperature |
AS/NZS 1050.26:1994 | Methods for the analysis of iron and steel Silicon in iron and steel - Spectrophotometric method (Reconfirmed 2016) |
AS 1210 SUPP 2-1999 | Pressure vessels - Cold-stretched austenitic stainless steel vessels (Supplement to AS 1210-1997) |
AS/NZS 1050.1:1996 | Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis |
AS 1210 SUPP 1-1990 | Unfired Pressure Vessels - Advanced design and construction (Supplement to AS 1210-1997) |
AS/NZS 1050.32:1994 | Methods for the analysis of iron and steel Determination of carbon content - Infrared method (Reconfirmed 2017) |
AS 4458-1997 | Pressure equipment - Manufacture (Reconfirmed 2016) |
AS/NZS 1050.27:1994 | Methods for the analysis of iron and steel Determination of titanium content - Spectrophotometric method (Reconfirmed 2016) |
AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
AS 2419.1-1994 | Fire hydrant installations - System design, installation and commissioning |
AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
AS 1544.2-2003 | Method for impact tests on metals Charpy V-notch (Reconfirmed 2017) |
AS/NZS 1050.18:1994 | Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016) |
AS/NZS 1050.37:1994 | Methods for the analysis of iron and steel Determination of copper content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS/NZS 1050.6:1995 | Methods for the analysis of iron and steel Determination of tin content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS/NZS 1050.14:1994 | Methods for the analysis of iron and steel Determination of manganese in iron and steel - Titrimetric method |
AS/NZS 1050.8:1994 | Methods for the analysis of iron and steel Determination of manganese content - Spectrophotometric method (Reconfirmed 2016) |
AS 1050.17-1988 | Methods for the analysis of iron and steel Determination of copper content - Spectrophotometric method |
AS 1733-1976 | Methods for the determination of grain size in metals (Reconfirmed 2018) |
AS 1050.29-1989 | Methods for the analysis of iron and steel Determination of cobalt content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS/NZS 1050.21:1994 | Methods for the analysis of iron and steel Determination of cobalt content - Spectrophotometric method (Reconfirmed 2016) |
AS 1050.33-1988 | Methods for the analysis of iron and steel Determination of nickel content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS 1050.23-1990 | Methods for the analysis of iron and steel Determination of molybdenum content - Flame atomic absorption spectrometric method |
AS 1074-1989 | Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
AS/NZS 1050.2:1994 | Methods for the analysis of iron and steel Determination of carbon content - Gravimetric method (Reconfirmed 2016) |
AS 1050.12-1983 | Methods for the analysis of iron and steel Determination of nitrogen in steel (steam distillation titrimetric method) (Reconfirmed 2016) |
AS/NZS 1050.16:1994 | Methods for the analysis of iron and steel Determination of sulfur content - Infrared absorption method after combustion in an induction furnace (Reconfirmed 2017) |
AS 1210-1997 | Pressure vessels |
AS/NZS 1050.38:1994 | Methods for the analysis of iron and steel Determination of vanadium content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
AS/NZS 1050.20:1994 | Methods for the analysis of iron and steel Determination of magnesium content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS/NZS 4645.2:2008 | Gas distribution networks Steel pipe systems |
AS/NZS 3500.1:2018 | Plumbing and drainage Water Services |
AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
AS/NZS 4645.2:2018 | Gas distribution networks Steel pipe systems |
AS 2419.1-2005 | Fire hydrant installations System design, installation and commissioning |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.