AS 4809-2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-30-2017
01-01-2003
Provides requirements for the installation of copper piping. Including information on installation practices, behaviour and durability of copper pipes.
This Standard specifies requirements for the selection, installation and commissioning of copper plumbing, gas and waste water systems. Some aspects of design are also specified.
Committee |
WS-018
|
DocumentType |
Standard
|
ISBN |
0 7337 5004 4
|
Pages |
29
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
First published as AS 4809-2003.
AS 4087-1996 | Metallic flanges for waterworks purposes |
AS 3517-1995 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications |
AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
AS 1684.1-1999 | Residential timber-framed construction Design criteria |
HB 93 SUPP 1-1997 | Commissioning of fire hydrant systems |
AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
AS 1684.2-1999 | Residential timber-framed construction Non-cyclonic areas |
AS 2118.5-1995 | Automatic fire sprinkler systems - Domestic |
AS 1646.3-2000 | Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds |
HB 93 Supp 1-1997 | Commissioning of fire hydrant systems |
AS D26-1972 | Tube fittings with dryseal American standard taper pipe and unified threads for automotive and industrial use (imperial units) (Reconfirmed 2018) |
AS 2118.9-1995 | Automatic fire sprinkler systems Piping support and installation (Reconfirmed 2013) |
AS 2118.2-1995 | Automatic fire sprinkler systems - Wall wetting sprinklers (Drenchers) |
AS 1167.1-1993 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
AS 2441-1988 | Installation of fire hose reels |
AS/NZS 3500.2.2:1996 | National plumbing and drainage Sanitary plumbing and drainage - Acceptable solutions |
AS/NZS 3500.4.2:1997 | National Plumbing and Drainage Hot water supply systems - Acceptable solutions |
AS 1684.4-1999 | Residential timber-framed construction, - Simplified - Non-cyclonic areas (SEE IMPORTANT NOTE) |
AS 1628-1999 | Water supply - Metallic gate, globe and non-return valves |
AS 1589-2001 | Copper and copper alloy waste fittings (Reconfirmed 2018) |
AS 2419.1-1994 | Fire hydrant installations - System design, installation and commissioning |
AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
AS/NZS 4020:2002 | Testing of products for use in contact with drinking water |
AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
AS/NZS 3500.1.2:1998 | National plumbing and drainage Water supply - Acceptable solutions |
AS/NZS 1260:2002 | PVC-U pipes and fittings for drain, waste and vent application |
AS 1684.3-1999 | Residential timber-framed construction Cyclonic areas |
AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
AS/NZS 3500.0:1995 | National Plumbing and Drainage Code Glossary of terms |
AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
AS 2118.4-1995 | Automatic fire sprinkler systems - Residential |
MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
AS 2118.1-1999 | Automatic fire sprinkler systems - General requirements |
AS 2129-2000 | Flanges for pipes, valves and fittings (Reconfirmed 2016) |
AS/NZS 3500.4:2015 | Plumbing and drainage Heated water services |
AS/NZS 3500.5:2012 | Plumbing and drainage Housing installations |
AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
AS 2896-2011 | Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems |
AS 2419.1-2005 | Fire hydrant installations System design, installation and commissioning |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.