Preview

AS 5100.5-2004

Superseded

View Superseded by

Preview

Bridge design - Concrete

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-30-2017

Published date

01-01-2004

Publisher

Standards Australia

Preview

Sets out minimum requirements for the design and construction of concrete bridges and associated structures, including members that contain reinforcing steel or tendons, or both, in limit states format.

This Standard sets out minimum requirements for the design and construction of concrete bridges and associated structures including members that contain reinforcing steel or tendons, or both. It also sets out minimum requirements for plain concrete members.

Committee	BD-090
DocumentType	Standard
ISBN	0 7337 5706 5
Pages	158
PublisherName	Standards Australia
Status	Superseded
SupersededBy	AS 5100.5:2017
Supersedes	DR 00378 HB 77.5-1996 HB 77.0-1996 HB 77.8-1996
UnderRevision	DR AS 5100.3

First published as HB 77.5-1996.Revised and redesignated as AS 5100.5-2004. First published as HB 77.5-1996. Revised and redesignated as AS 5100.5-2004.

AS 2350.15-1995	Methods of testing portland and blended cements Water-soluble chromate content of portland cement (Reconfirmed 2016)
AS 1199.4-2003	Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels (Reconfirmed 2016)
AS 1379-1997	Specification and supply of concrete
AS 1012.17-1997	Methods of testing concrete Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens (Reconfirmed 2014)
AS/NZS 3000:2000	Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS 1012.4.2-1999	Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in air pressure in chamber above concrete
AS 3582.1-1998	Supplementary cementitious materials for use with portland and blended cement Fly ash
AS 1310-1987	Steel wire for tendons in prestressed concrete
AS 2350.12-1995	Methods of testing portland and blended cements Preparation of a standard mortar and moulding of specimens
AS 1199.2-2003	Sampling procedures for inspection by attributes Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (Reconfirmed 2016)
AS/NZS 1554.3:2002	Structural steel welding - Welding of reinforcing steel
AS 3610-1995	Formwork for concrete
AS 3582.2-2001	Supplementary cementitious materials for use with portland and blended cement Slag - Ground granulated iron blast-furnace
AS/NZS 1314:2003	Prestressing anchorages (Reconfirmed 2016)
AS 2350.2-1991	Methods of testing portland and blended cements - Chemical composition of portland cement
AS 1313-1989	Steel tendons for prestressed concrete - Cold-worked high-tensile alloy steel bars for prestressed concrete
AS 2350.13-1995	Methods of testing portland and blended cements Determination of drying shrinkage of portland and blended cement mortars
AS 1012.12.2-1998	Methods of testing concrete Determination of mass per unit volume of hardened concrete - Water displacement method (Reconfirmed 2014)
AS 1012.3.4-1998	Methods of testing concrete Determination of properties related to the consistency of concrete - Compactibility index (Reconfirmed 2014)
AS 1012.10-2000	Methods of testing concrete Determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test) (Reconfirmed 2014)
AS 3972-1997	Portland and blended cements
AS 1597.2-1996	Precast reinforced concrete box culverts Large culverts (from 1500 mm span and up to and including 4200 mm span and 4200 mm height)
AS 1199.0-2003	Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS 1012.16-1996	Methods of testing concrete Determination of creep of concrete cylinders in compression (Reconfirmed 2014)
AS 1012.20-1992	Methods of testing concrete Determination of chloride and sulfate in hardened concrete and concrete aggregates
AS 2350.10-1991	Methods of testing portland and blended cements - Calcium oxide content of blended cement
HB 18.28-1991	Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products
AS 2350.9-1997	Methods of testing portland and blended cements - Determination of residue on the 45 micrometre sieve
AS 1012.9-1999	Methods of testing concrete Determination of the compressive strength of concrete specimens
HB 67-1995	Concrete practice on building sites
AS 1012.4.1-1999	Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in concrete volume with increased air pressure
HB 64-2002	Guide to concrete construction
AS 1012.11-2000	Methods of testing concrete Determination of the modulus of rupture (Reconfirmed 2014)
AS 3799-1998	Liquid membrane-forming curing compounds for concrete (Reconfirmed 2018)
AS 1311-1987	Steel tendons for prestressed concrete-7-wire stress-relieved steel strand for tendons in prestressed concrete
AS 1199.3-2003	Sampling procedures for inspection by attributes Skip-lot sampling procedures (Reconfirmed 2016)
AS 3600-2001	Concrete structures
AS/NZS 4671:2001	Steel reinforcing materials
AS 1012.12.1-1998	Methods of testing concrete Determination of mass per unit volume of hardened concrete - Rapid measuring method (Reconfirmed 2014)
AS/NZS 3582.3:2002	Supplementary cementitious materials for use with portland and blended cement Amorphous silica
AS 2350.7-1997	Methods of testing portland and blended cements - Determination of temperature rises during hydration of portland and blended cements
AS 1199.1-2003	Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS 5100.1-2004	Bridge design - Scope and general principles
AS 5100.2-2004	Bridge design - Design loads
AS 5100.4-2004	Bridge design Bearings and deck joints
AS 5100.7-2004	Bridge design - Rating of existing bridges
AS 5100.6-2004	Bridge design - Steel and composite construction
AS 1012.14-1991	Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength
AS 1012.13-1992	Methods of testing concrete Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory
AS 2350.14-1996	Methods of testing portland and blended cements - Length change of portland and blended cement mortars exposed to a sulfate solution
AS/NZS 1768(INT):2003	Lightning protection

AS 1597.1-2010	Precast reinforced concrete box culverts Small culverts (not exceeding 1200 mm span and 1200 mm height)
AS 1597.2-2013	Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height)
AS 4997-2005	Guidelines for the design of maritime structures
AS 2159-2009	Piling - Design and installation
AS 5100.6-2004	Bridge design - Steel and composite construction
AS 5100.4-2004	Bridge design Bearings and deck joints
AS 5100.1-2004	Bridge design - Scope and general principles
AS 3700-2011	Masonry structures
AS 5100.7-2004	Bridge design - Rating of existing bridges
AS 5100.2-2004	Bridge design - Design loads
AS 5100.3-2004	Bridge design Foundations and soil supporting structures

View more information

US$134.20

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

AS 5100.5-2004

Superseded

Abstract

Scope

General Product Information

History

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription