• There are no items in your cart

AS 60068.2.65-2003

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Environmental testing Tests - Test Fg: Vibration, acoustically induced
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

01-30-2019

Language(s)

English

Published date

01-01-2003

Preview

1 - AS 60068.2.65-2003 ENVIRONMENTAL TESTING - TESTS-TEST Fg: VIBRATION, ACOUSTICALLY INDUCED
4 - PREFACE
5 - CONTENTS
6 - INTRODUCTION
7 - 1 Object
7 - 2 Normative references
8 - 3 Definitions, symbols and abbreviations
8 - 3.1 Definitions
8 - 3.1.1 acoustic horn
8 - 3.1.2 analysis integration time:
8 - 3.1.3 bandwidth
8 - 3.1.4 overall sound pressure level (OASPL):
8 - 3.1.5 centre frequency
8 - 3.1.6 constant-bandwidth filter
8 - 3.1.7 cut-off frequency
9 - 3.1.8 diffuse sound field:
9 - 3.1.9 electro or hydraulic-pneumatic transducer:
9 - 3.1.10 frequency interval
9 - 3.1.11 measuring points:
9 - 3.1.12 multipoint control:
9 - 3.1.13 narrowband frequency filter:
9 - 3.1.14 broadband frequency or wide band filter:
10 - 3.1.15 progressive wave tube:
10 - 3.1.16 proportional-bandwidth filter
10 - 3.1.17 reverberation room
10 - 3.1.18 sound absorption coefficient
10 - 3.1.19 sound pressure p
10 - 3.1.20 standing wave tube:
10 - 3.2 Symbols and abbreviations
11 - 4 Acoustic environments and requirements for testing
11 - 4.1 Acoustic environment for testing
11 - 4.1.1 Reverberant field testing
11 - 4.1.2 Progressive wave testing
11 - 4.1.3 Cavity resonance testing
11 - 4.1.4 Standing wave testing
11 - 4.2 Sound sources
11 - 4.3 Measuring apparatus
11 - 4.3.1 Acoustic measurements
12 - 4.3.2 Vibration response measurements
12 - 4.3.3 Analysis of results
12 - 4.4 Requirements for testing
12 - 4.4.1 Type of facility
13 - 4.4.2 Mounting
13 - 4.4.3 Specimen instrumentation
13 - 4.4.4 Preparation of reverberation room
14 - 5 Severities
14 - 6 Preconditioning
14 - 7 Initial measurements
14 - 8 Testing
14 - 8.1 Normal testing
15 - 8.2 Accelerated testing
15 - 9 Intermediate measurements
15 - 10 Recovery
15 - 11 Final measurements
15 - 12 Information to be given in the relevant specification
21 - Annex A - Guidance for the test requirements
21 - A.1 Reverberation room testing
23 - A.2 Progressive wave tube testing
23 - A.3 Cavity resonance testing
23 - A.4 Standing wave tube testing
24 - A.5 The selection of sound sources
25 - A.6 Severities
25 - A.7 Accelerated testing
26 - A.8 Analysis integration time
27 - Annex B - Bibliography

Provides standard procedures and guidance for conducting acoustic tests in order to determine the ability of a specimen to withstand vibration caused by a specified sound-pressure level environment to which it is, or is liable to be, subjected.

To provide standard procedures and guidance for conducting acoustic tests in order to determine the ability of a specimen to withstand vibration caused by a specified sound-pressure level environment to which it is, or is liable to be, subjected. For sound pressure level environments of less than 120 dB acoustic tests are not normally required.To determine mechanical weakness and/or degradation in the performance of specimens and to use this information, in conjunction with the relevant specification, to decide their acceptability. In some cases, the methods of test may also be used as a means of establishing the mechanical robustness or fatigue resistance of specimens.This part of IEC 60068 describes the procedures for conducting tests and for measurement of the sound pressure levels within the acoustic noise field and considers the need for measurement of the vibration responses at specified points on the specimen. It also gives guidance for the selection of the acoustic noise environment, spectrum, sound pressure level and duration of exposure.

Committee
EL-026
DocumentType
Standard
ISBN
0 7337 5299 3
Pages
21
ProductNote
Withdrawn 30-01-2019.
PublisherName
Standards Australia
Status
Withdrawn
Supersedes

Standards Relationship
IEC 60068-2-65:1993 Identical

First published as AS 60068.2.65-2003.

AS 60118.7-2007 Hearing aids Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes (Reconfirmed 2019)
AS 60118.9-2007 Hearing aids Methods of measurement of characteristics of hearing aids with bone vibrator output (Reconfirmed 2019)
AS/NZS 61000.4.7:2012 Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (Reconfirmed 2023)
AS 62103-2006 Electronic equipment for use in power installations
AS 2067-2008 Substations and high voltage installations exceeding 1 kV a.c.
AS 60947.5.4-2004 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Methods of assessing the performance of low-energy contacts - Special tests
AS/NZS 60065:2012 Audio, video and similar electronic apparatus - Safety requirements (IEC 60065, Ed.7.2 (2011) MOD)
AS 2578-2009 Traffic signal controllers
AS/NZS 60079.7:2006 Explosive atmospheres Equipment protection by increased safety 'e'
AS 2650-2005 Common specifications for high-voltage switchgear and controlgear standards (IEC 60694 Ed.2.2(2002) MOD)
AS 62271.1-2012 High-voltage switchgear and controlgear - Common specifications

View more information
US$82.57
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.