AS 60947.1-2004
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
01-01-2004
Specifies general requirements and tests that are common to switchgear and controlgear intended to be connected to circuits, the rated voltage of which does not exceed 1000 volt a.c. or 1500 volt d.c. This document is technically identical with and reproduced from IEC 60947.1:2004.
This standard applies,when required by the relevant product standard,to switchgear andcontrolgear hereinafter referred to as ‘equipment ’ and intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c.or 1 500 V d.c.It does not apply to low-voltage switchgear and controlgear assemblies which are dealt with inAS/NZS 60439IEC 60439.NOTE In certain clauses or subclauses of this standard, the equipment covered by this standard is also referred to as ‘device’, to be consistent with the text of such clauses or subclauses.The object of this standard is to state those general rules and requirements which arecommon to low-voltage equipment as defined in 1.1,including for example:– definitions;– characteristics;– information supplied with the equipment;– normal service,mounting and transport conditions;– constructional and performance requirements;– verification of characteristics and performance.
| Committee |
EL-006
|
| DocumentType |
Standard
|
| ISBN |
0 7337 6257 3
|
| Pages |
163
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| IEC 60947-1:2004 | Identical |
| IEC 60947-1:2007 | Identical |
First published in Australia as AS 3650-1988.Revised and redesignated AS 3947.1-1993.Jointly revised and designated AS/NZS 3947.1:1998.Third edition 2001.Revised and redesignated as AS 60947.1-2004. First published in Australia as AS 3650-1988. Revised and redesignated AS 3947.1-1993. Jointly revised and designated AS/NZS 3947.1:1998. Third edition 2001. Revised and redesignated as AS 60947.1-2004.
| AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 61000.4.2:2002 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Electrostatic discharge immunity test |
| AS 4362.2-1996 | High-voltage test techniques for low-voltage equipment Test equipment |
| AS/NZS 61000.4.8:2002 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Power frequency magnetic field immunity test |
| AS/NZS 60695.11.10:2001 | Fire hazard testing Test flames - 50 W horizontal and vertical flame test methods |
| AS 60417.2.7-2004 | Graphical symbols for use on equipment Safety aspects |
| AS 60417.2.6-2004 | Graphical symbols for use on equipment Medical equipment |
| AS 1824.1-1995 | Insulation co-ordination Definitions, principles and rules |
| AS/NZS 60269.1:2000 | Low-voltage fuses General requirements |
| AS/NZS 60269.2.0:2000 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) |
| AS/NZS 4695.2.2:1996 | Fire hazard testing of electrotechnical products Test methods - Needle-flame test |
| AS 1852.604-1988 | International electrotechnical vocabulary Generation, transmission and distribution of electricity - Operation |
| AS 1852.441-1985 | International electrotechnical vocabulary - Switchgear, controlgear and fuses |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS/NZS CISPR 11:2004 | Industrial scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| AS 4362.1-1996 | High-voltage test techniques for low-voltage equipment Definitions, test and procedure requirements |
| AS/NZS 61000.4.3:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test |
| AS 1931.1-1996 | High-voltage test techniques - General definitions and test requirements |
| AS/NZS 60695.2.10:2001 | Glowing/hot wire based test methods Glow-wire apparatus and common test procedure |
| AS/NZS 61000.4.5:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test |
| AS/NZS 61000.3.2:2003 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current less than or equal to 16 A per phase) |
| AS 60417.2.5-2004 | Graphical symbols for use on equipment Home electric appliances |
| AS 60417.2.4-2004 | Graphical symbols for use on equipment Maritime navigation |
| AS 60417.2.2-2004 | Graphical symbols for use on equipment Audiovisual equipment |
| AS 60417.2.3-2004 | Graphical symbols for use on equipment Telephone and telecommunications |
| AS 60417.2.1-2004 | Graphical symbols for use on equipment General application |
| AS/NZS 3439.1:2002 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD) |
| AS 1852.826-1983 | International electrotechnical vocabulary - Electrical installations of buildings |
| AS/NZS 61000.4.6:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| AS 1931.2-1996 | High-voltage test techniques - Measuring systems |
| AS 60417.1-2004 | Graphical symbols for use on equipment - Overview and application |
| AS 60947.5.1-2004 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices |
| AS 60068.2.78-2003 | Environmental testing Tests - Test Cab: Damp heat, steady state (Reconfirmed 2018) |
| AS/NZS 60079.0:2008 | Explosive atmospheres Equipment - General requirements |
| AS 60947.5.2-2004 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Proximity switches |
| AS 60947.7.3-2004 | Low-voltage switchgear and controlgear Ancillary equipment - Safety requirements for fuse terminal blocks |
| AS 60947.4.1-2004 | Low-voltage switchgear and controlgear Contactors and motor-starters - Electromechanical contactors and motor-starters |
| AS 60947.5.1-2004 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices |
| AS/NZS 60950.1:2011 | Information technology equipment - Safety General requirements (IEC 60950-1, Ed. 2.0 (2005), MOD) |
| AS 60947.6.2-2004 | Low-voltage switchgear and controlgear Multiple function equipment - Control and protective switching devices (or equipment) (CPS) |
| AS 60947.7.1-2004 | Low-voltage switchgear and controlgear Ancillary equipment - Terminal blocks for copper conductors |
| AS 60947.4.2-2004 | Low-voltage switchgear and controlgear Contactors and motor-starters - A.C. semiconductor motor controllers and starters |
| AS/NZS 60079.0:2012 | Explosive atmospheres Equipment - General requirements |
| AS/NZS 60079.0:2005 | Electrical apparatus for explosive gas atmospheres General requirements |
| AS 60947.5.4-2004 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Methods of assessing the performance of low-energy contacts - Special tests |
| AS/NZS 4240.1:2009 | Remote control systems for mining equipment Design, construction, testing, installation and commissioning (Reconfirmed 2021) |
| AS 60204.1-2005 | Safety of machinery - Electrical equipment of machines General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD) |
| AS 61330-2005 | High-voltage/low-voltage prefabricated substations |
| AS/NZS 60079.7:2006 | Explosive atmospheres Equipment protection by increased safety 'e' |
| AS 60947.7.2-2004 | Low-voltage switchgear and controlgear Ancillary equipment - Protective conductor terminal blocks for copper conductors |
| AS 60947.2-2005 | Low-voltage switchgear and controlgear - Circuit-breakers |
| AS 60947.8-2005 | Low-voltage switchgear and controlgear - Control units for built-in thermal protection (PTC) for rotating electrical machines |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.