• There are no items in your cart

AS 60947.2-2005

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Low-voltage switchgear and controlgear - Circuit-breakers
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-30-2017

Language(s)

English

Published date

01-01-2005

Preview

Specifies requirements for circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1000 V a.c. or 1500 V d.c. Includes requirements for coordination under short-circuit conditions between a circuit-breaker and another short-circuit protective device. Is identical with and has been reproduced from IEC 60947.2 Edition 3-0 (2003-04).

Committee
EL-006
DocumentType
Standard
ISBN
0 7337 6583 1
Pages
196
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

Standards Relationship
IEC 60947-2:2003 Identical

First published as AS 3858-1990.Revised and redesignated AS 3947.2-1997.Jointly revised and designated AS/NZ 3947.2:2002.Revised and redesignated as AS 60947.2-2005. Originated as AS 3858-1990. Revised and redesignated AS 3947.2-1997. Jointly revised and designated AS/NZS 3947.2:2002. Revised and redesignated as AS 60947.2-2005.

AS 60068.2.30-2003 Environmental testing Tests - Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle)
AS/NZS 60898.2:2004 Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. and d.c. operation (IEC 60898-2, Ed. 1.1 (2003) MOD) (Reconfirmed 2016)
AS/NZS CISPR 22:2004 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
AS 3111-1994 Approval and test specification - Miniature overcurrent circuit-breakers
AS/NZS CISPR 11:2004 Industrial scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
AS 60947.1-2004 Low-voltage switchgear and controlgear General rules
AS/NZS 61000.4.6:1999 Electromagnetic compatibility (EMC) Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
AS/NZS 60898.1:2004 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. operation (IEC 60898-1, Ed. 1.2 (2003) MOD)
AS 60947.4.1-2004 Low-voltage switchgear and controlgear Contactors and motor-starters - Electromechanical contactors and motor-starters
AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 61000.4.2:2002 Electromagnetic compatibility (EMC) Testing and measurement techniques - Electrostatic discharge immunity test
AS/NZS 60695.2.12:2001 Fire hazard testing Glowing/hot wire based test methods - Glow-wire flammability test method for materials
AS/NZS 60695.2.11:2001 Fire hazard testing Glowing/hot wire based test methods - Glow-wire flammability test method for end-products (IEC 60695-2-11:2000, MOD)
AS/NZS 60695.2.10:2001 Glowing/hot wire based test methods Glow-wire apparatus and common test procedure
AS/NZS 61000.3.3:2003 Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current less than or equal to 16A per phase and not subject to conditional connection
AS/NZS 61000.4.3:1999 Electromagnetic compatibility (EMC) Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test
AS 2184-1985 Low voltage switchgear and controlgear - Moulded-case circuit-breakers for rated voltages up to and including 600 V a.c. and 250 V d.c.
AS 1852.441-1985 International electrotechnical vocabulary - Switchgear, controlgear and fuses
AS/NZS 60695.2.13:2001 Fire hazard testing Glowing/hot wire based test methods - Glow-wire ignitability test method for materials (IEC 60695-2-13:2000, IDT)
AS/NZS 61000.4.5:1999 Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test
AS/NZS 61000.3.2:2003 Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current less than or equal to 16 A per phase)
AS 60068.2.14-2003 Environmental testing Tests - Test N: Change of temperature

AS/NZS 3012:2010 Electrical installations - Construction and demolition sites
AS/NZS 3111:2009 Approval and test specification - Miniature overcurrent circuit-breakers (Reconfirmed 2020)
AS/NZS 4024.1:2006 Series Safety of machinery Safety of machinery series
AS 2941-2008 Fixed fire protection installations - Pumpset systems
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS 2941-2013 Fixed fire protection installations - Pumpset systems
AS/NZS 4240.1:2009 Remote control systems for mining equipment Design, construction, testing, installation and commissioning (Reconfirmed 2021)
AS 2467-2008 Maintenance of electrical switchgear
AS 4024.1502-2006 Safety of machinery Design of safety related parts of control systems - Validation (Reconfirmed 2014)
AS 62271.1-2012 High-voltage switchgear and controlgear - Common specifications

View more information
US$196.91
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.