Customer Support: +1 416-401-8730

Login to i2i Subscription Intertek.com
  • There are no items in your cart
Please enter a keyword to search
Advanced search

AS/NZS 1200:1994

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Pressure equipment
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-25-2021

Language(s)

English

Published date

07-18-1994

Publisher

Standards Australia

Preview

1 - AS/NZS 1200: 1994 PRESSURE EQUIPMENT
4 - PREFACE
6 - CONTENTS
8 - SECTION 1 SCOPE AND GENERAL
8 - 1.1 SCOPE
8 - 1.2 PURPOSE AND APPLICATION
8 - 1.2.1 Purpose
8 - 1.2.2 Application
8 - 1.3 INTERPRETATION OF STANDARDS
9 - 1.4 NEW DESIGNS, MATERIALS AND MANUFACTURING METHODS
9 - 1.5 REGULATORY AUTHORITY REQUIREMENTS
9 - 1.5.1 General
9 - 1.5.2 Registration
9 - 1.6 DEFINITIONS
9 - 1.7 ALTERNATIVE STANDARDS
9 - 1.8 ROUNDING OF NUMERICAL VALUES
9 - 1.9 CONVERSION OF UNITS
9 - 1.10 TOLERANCES
9 - 1.11 CONCESSIONS
10 - 1.12 IMPLEMENTATION
10 - 1.13 RULINGS
10 - 1.14 REFERENCE TO STANDARDS
10 - 1.15 DEVELOPMENT OF STANDARDS
10 - 1.16 REFERENCED DOCUMENTS
10 - 1.17 BASIS OF DESIGN STRENGTH
11 - SECTION 2 SPECIFIC AUSTRALIAN REQUIREMENTS
11 - 2.1 GENERAL
11 - 2.2 DESIGN VERIFICATION
11 - 2.3 FABRICATION INSPECTION
12 - 2.4 PRESSURE EQUIPMENT SUPPLIED FROM OVERSEAS
12 - 2.4.1 General
12 - 2.4.2 New Zealand manufactured equipment
12 - 2.5 PRESSURE EQUIPMENT EXPORTED FROM AUSTRALIA TO COUNTRIES OTHER THAN NEW ZEALAND
12 - 2.6 PRESSURE EQUIPMENT EXPORTED FROM AUSTRALIA TO NEW ZEALAND
13 - SECTION 3 SPECIFIC NEW ZEALAND REQUIREMENTS
13 - 3.1 GENERAL
13 - 3.2 DESIGN VERIFICATION
13 - 3.2.1 Application
14 - 3.2.2 Certificate
14 - 3.3 FABRICATION INSPECTION
14 - 3.4 PRESSURE EQUIPMENT SUPPLIED FROM OVERSEAS
14 - 3.5 PRESSURE EQUIPMENT EXPORTED FROM NEW ZEALAND TO COUNTRIES OTHER THAN AUSTRALIA
14 - 3.6 PRESSURE EQUIPMENT FOR EXPORT FROM NEW ZEALAND TO AUSTRALIA
15 - APPENDIX A - EQUIPMENT COVERED BY THIS STANDARD
15 - A1 PRESSURE EQUIPMENT COVERED
15 - A2 EXAMPLES
15 - A3 PRESSURE EQUIPMENT COVERED OPTIONALLY
15 - A4 EQUIPMENT OR PLANT UNDER PRESSURE NOT SPECIFICALLY COVERED
18 - APPENDIX B - ENQUIRIES (OPINIONS, INTERPRETATIONS AND RULINGS) ON THIS STANDARD AND REFERENCED STANDARDS
18 - B1 INTRODUCTION
18 - B2 ENQUIRIES
18 - B3 APPLICATION FOR ENQUIRY
19 - B4 PROCEDURE OF ENQUIRY
19 - B5 STATUS OF OPINIONS, INTERPRETATIONS AND RULINGS
20 - APPENDIX C - MATERIALS FOR USE UNDER THIS STANDARD
20 - C1 POLICY FOR MATERIALS
20 - C1.1 General
20 - C1.2 Permitted material Standards
20 - C1.3 Alternative national Standards
20 - C1.4 New materials
20 - C2 APPROVAL OF NEW MATERIAL (See also Appendix B)
20 - C2.1 Ruling
21 - C2.2 Mechanical properties
21 - C2.3 Weldability
21 - C2.4 Physical changes
22 - APPENDIX D - AUSTRALIAN AND NEW ZEALAND REGULATORY AUTHORITIES
23 - APPENDIX E - DEFINITIONS
23 - E1 GENERAL
23 - E2 DEFINITIONS
23 - E2.1 Alter
23 - E2.2 Boiler
23 - E2.3 Capable person (New Zealand)
23 - E2.4 Certification body
23 - E2.5 Commissioning
23 - E2.6 Competent person (Australia)
23 - E2.7 Designer
24 - E2.8 Design verifying body
24 - E2.9 Fabrication inspection body
24 - E2.10 Fired heater
24 - E2.11 Gas cylinder
24 - E2.12 Hazard
24 - E2.13 Hot water boiler (New Zealand)
24 - E2.14 In-service inspection body
24 - E2.15 Inspection body
24 - E2.16 Installer
24 - E2.17 Maintain
24 - E2.18 Manufacturer
24 - E2.19 May
24 - E2.20 Operate
24 - E2.21 Owner
24 - E2.22 Parties concerned
24 - E2.23 Pressures
24 - E2.24 Pressure equipment
25 - E2.25 Pressure piping
25 - E2.26 Pressure vessel
25 - E2.27 Purchaser
25 - E2.28 Regulatory authority
25 - E2.29 Repair
25 - E2.30 Risk
25 - E2.31 Risk assessment
25 - E2.32 Shall
25 - E2.33 Should
25 - E2.34 Supplier
25 - E2.35 Use
26 - APPENDIX F - A COMPARISON OF AUSTRALIAN PRESSURE EQUIPMENT STANDARDS WITH OTHER OVERSEAS STANDARDS
26 - F1 SCOPE
26 - F2 COMPARISON OF AUSTRALIAN AND OVERSEAS PRESSURE EQUIPMENT STANDARDS
26 - F3 OVERSEAS ACCEPTANCE OF PRESSURE EQUIPMENT BUILT IN AUSTRALIA OR NEW ZEALAND TO AS/NZS 1200 (THIS STANDARD)
26 - F4 AUSTRALIAN AND NEW ZEALAND ACCEPTANCE OF PRESSURE EQUIPMENT BUILT TO STANDARDS OTHER THAN AUSTRALIAN OR NEW ZEALAND STANDARDS
28 - APPENDIX G - DEVELOPMENT OF THIS STANDARD AND RELATED STANDARDS
28 - G1 GENERAL
28 - G2 BASIC POLICY
28 - G3 OBJECTIVES IN STANDARDS
28 - G4 DEVELOPMENT PROCEDURE
28 - G4.1 Proposals for Standards
28 - G4.2 Selection of projects
29 - G4.3 Planning and development
29 - G4.4 Public comment
29 - G4.5 Voting
29 - G4.6 Documentation
29 - G5 IMPROVEMENT OF STANDARDS
29 - G5.1 New editions and amendments
29 - G5.2 Enquiries, interpretations or rulings
29 - G6 ORGANIZATION
31 - APPENDIX H - LIST OF REFERENCED DOCUMENTS
34 - APPENDIX I - BASIS OF DESIGN STRENGTH ADOPTED IN APPLICABLE STANDARDS
35 - APPENDIX J - NEW ZEALAND REQUIREMENTS FOR SEISMIC, WIND AND SNOW LOADINGS FOR PRESSURE EQUIPMENT
35 - J1 SEISMIC LOADINGS
35 - J2 ADDITIONAL REQUIREMENTS FOR SEISMIC LOADINGS
36 - J3 WIND AND SNOW LOADINGS

Sets out the Australian and New Zealand requirements to which pressure equipment (boilers, pressure vessels and pressure piping) is to be designed, manufactured, tested, inspected, supplied, installed, commissioned, operated, maintained, repaired, altered and disposed of. Specifies requirements which are common to Australian and New Zealand pressure equipment Standards. Appendices include pressure equipment covered by this Standard, enquiries, materials, a list of Australian and New Zealand regulatory authorities, definitions, the basis of design strength and New Zealand loading requirements.

This Standard, together with Standards referenced in Figure G1, sets out the Australian and New Zealand requirements to which pressure equipment (boilers, pressure vessels and pressure piping) shall be designed, manufactured, tested, inspected, supplied, installed, commissioned, operated, maintained, repaired, altered and disposed of. This Standard also specifies requirements which are common to Australian and New Zealand pressure equipment Standards.PURPOSE AND

Committee
ME-001
DocumentType
Standard
ISBN
0 7262 9101 3
Pages
29
ProductNote
(In Rul PE/1)
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes

Under Revision see DR 98082 First published as AS 1200-1972.Second edition 1978.Third edition 1981.Fourth edition 1988. Jointly revised and designated as Joint Standard AS/NZS 1200:1994. First published as AS 1200-1972. Second edition 1978. Third edition 1981. Fourth edition 1988. Jointly revised and designated as Joint Standard AS/NZS 1200:1994.

AS 3902-1987 Quality systems for production and installation
AS 3500.4-1994 National Plumbing and Drainage Code Hot water supply systems
AS 1732-1997 Fusible plugs for boilers
AS 1358-1989 Bursting discs and bursting disc devices - Guide to application, selection, and installation
AS 3901-1987 Quality systems for design/development, production, installation and servicing
AS 2971-1987 Serially produced pressure vessels
AS 3920.1-1993 Assurance of product quality Pressure equipment manufacture
AS 3788-1990 Boilers and pressure vessels - In-service inspection
AS 3142-1994 Approval and test specification - Electric water heaters
AS 2030 SUPP 1-1986 Foreign gas cylinder specifications
AS 3653-1993 Boilers - Safety, management, combustion and other ancillary equipment
AS 1796-1993 Certification of welders and welding supervisors
AS 2129-1994 Flanges for pipes, valves and fittings
AS 3857-1999 Heat exchangers - Tubeplates - Method of design (Reconfirmed 2016)
AS 2182-1998 Sterilizers - Steam - Benchtop
AS 2487-1981 Dry heat sterilizers (hot air type)
AS 1228-1997 Pressure equipment - Boilers
AS 3992-1992 Boilers and pressure vessels - Welding and brazing qualification
AS 3873-1995 Pressure equipment - Operation and maintenance
AS 3509-1988 LP gas fuel vessels for automotive use
AS 1210 SUPP 1-1990 Unfired Pressure Vessels - Advanced design and construction (Supplement to AS 1210-1997)
AS 1210-1989 Unfired Pressure Vessels (known as the SAA Unfired Pressure Vessels Code)
AS 1271-1997 Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels
AS 3892-1995 Pressure equipment - Installation
AS 2593-1995 Boilers - Unattended and limited attendance
AS 2278-1986 Metal aerosol containers
AS 4037-1999 Pressure equipment - Examination and testing (Reconfirmed 2016)
AS 2192-1991 Sterilizers - Steam - Downward displacement
AS 1714-1990 Sterilizers - 12/88 ethylene oxide - Hospital use
AS 1692-1989 Tanks for flammable and combustible liquids
AS 1797-1986 Boilers - Fire-tube, shell, and miscellaneous
AS 1596-1989 LP Gas - Storage and handling
AS 2069-1977 Method for verifying the minimum elevated temperature lower yield or proof stress properties of carbon and low alloy steel products
AS 1056.1-1991 Storage water heaters General requirements
AS 1843-1976 Foam (chemical) type portable fire extinguishers
AS 2556-1982 Electric resistance welded steel air heater tubes
AS 1548-1995 Steel plates for pressure equipment
AS 1410-1987 Sterilizers - Steam - Pre-vacuum
AS 4041-1998 Pressure piping
AS 1841-1985 Portable fire extinguishers - Water (gas container) type
AS Z30-1966 Interconversion of inch and metric dimensions
AS 2872-1988 Atmospheric heating of vessels containing fluids - Estimation of maximum temperature
AS 1940-1993 The storage and handling of flammable and combustible liquids

AS 4343-1999 Pressure equipment - Hazard levels
AS 3873-1995 Pressure equipment - Operation and maintenance
AS 2865-1995 Safe working in a confined space
AS/NZS 3992:1998 Pressure equipment - Welding and brazing qualification
AS/NZS 1677.2:1998 Refrigerating systems Safety requirements for fixed applications
AS 2593-1995 Boilers - Unattended and limited attendance
AS 1228-1997 Pressure equipment - Boilers
MP 52-1997 Manual of authorization procedures for plumbing and drainage products
AS/NZS 3788:1996 Pressure equipment - In-service inspection
AS 1569-1998 Copper and copper alloys - Seamless tubes for heat exchangers (Reconfirmed 2020)
AS 4037-1999 Pressure equipment - Examination and testing (Reconfirmed 2016)
AS 3533.1-1997 Amusement rides and devices - Design and construction
AS/NZS 1596:1997 Storage and handling of LP Gas
AS 3533.2-1997 Amusement rides and devices - Operation and maintenance
AS/NZS 4114.1:1995 Spray painting booths - Design, construction and testing
AS 2809.3-1999 Road tank vehicles for dangerous goods - Tankers for compressed liquefiable gases
AS 1271-1997 Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels
AS/NZS 4233.2:1999 High pressure water (hydro) jetting systems Construction and performance
AS 1210-1997 Pressure vessels
AS 4458-1997 Pressure equipment - Manufacture (Reconfirmed 2016)
AS/NZS 2843.2:2000 Timber preservation plant safety code - Plant operation
AS 3892-1995 Pressure equipment - Installation

View more information
US$60.92
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

or

Get in touch with us