• There are no items in your cart

AS/NZS 1200:2000

AvailableSuperseded
AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Pressure equipment
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

06-23-2000

Preview

1 - AS/NZS 1200:2000 PRESSURE EQUIPMENT
4 - PREFACE
6 - CONTENTS
7 - SECTION 1 SCOPE AND GENERAL
7 - 1.1 SCOPE
7 - 1.2 OBJECTIVE
7 - 1.3 APPLICATION
8 - 1.4 DEFINITIONS
8 - 1.5 REFERENCED DOCUMENTS
8 - 1.6 SUPPLEMENT, AMENDMENT, ENQUIRY CASE AND RULING
8 - 1.6.1 Enquiry
8 - 1.6.2 Supplement, Amendment, Enquiry Case and Ruling
8 - 1.7 NEW DESIGNS, MATERIALS AND MANUFACTURING METHODS
8 - 1.8 ROUNDING OF NUMERICAL VALUES
8 - 1.9 CONVERSION OF UNITS
8 - 1.10 TOLERANCES
8 - 1.11 CONCESSIONS
9 - 1.12 IMPLEMENTATION
9 - 1.13 REFERENCE TO STANDARDS
10 - SECTION 2 BASIC REQUIREMENTS AND COMPLIANCE STANDARDS
10 - 2.1 BASIC REQUIREMENTS AND RECOMMENDATION
10 - 2.2 COMPLIANCE STANDARDS
10 - 2.3 MIXING STANDARDS
13 - APPENDIX A - EQUIPMENT COVERED BY THIS STANDARD
13 - A1 PRESSURE EQUIPMENT COVERED
13 - A2 EXAMPLES
13 - A3 EQUIPMENT OR PLANT UNDER PRESSURE NOT SPECIFICALLY COVERED
16 - APPENDIX B - ENQUIRY (OPINION, INTERPRETATION, ENQUIRY CASE AND RULING) ON THIS STANDARD AND REFERENCED STANDARDS
16 - B1 INTRODUCTION
16 - B2 ENQUIRY
16 - B3 APPLICATION FOR ENQUIRY
17 - APPENDIX C - MATERIALS FOR USE UNDER THIS STANDARD
17 - C1 POLICY FOR MATERIALS
17 - C1.1 General
17 - C1.2 Permitted material Standards
17 - C1.3 Alternative national Standards
17 - C2 NEW MATERIAL
17 - C2.1 Amendment or Supplement
18 - C2.2 Mechanical properties
18 - C2.3 Weldability
18 - C2.4 Physical changes
19 - APPENDIX D - NEW ZEALAND REGULATORY MATTERS
19 - D1 GENERAL
19 - D2 SPECIFIC REQUIREMENTS
19 - D2.1 Design verification
19 - D2.2 Fabrication inspection
19 - D2.3 Inspection openings
20 - APPENDIX E - DEFINITIONS
20 - E1 GENERAL
20 - E2 DEFINITIONS
23 - APPENDIX F - COMPARISON OF PRESSURE EQUIPMENT STANDARDS WITH OTHER OVERSEAS STANDARDS
23 - F1 SCOPE
23 - F2 COMPARISON OF AUSTRALIAN AND OVERSEAS PRESSURE EQUIPMENT STANDARDS
26 - APPENDIX G - ORGANIZATION OF AUSTRALIAN, NEW ZEALAND AND OTHER PRESSURE EQUIPMENT STANDARDS
27 - APPENDIX H - LIST OF REFERENCED DOCUMENTS
30 - APPENDIX I - NEW ZEALAND REQUIREMENTS FOR SEISMIC, WIND AND SNOW LOADINGS FOR PRESSURE EQUIPMENT
30 - I1 SEISMIC LOADINGS
30 - I2 ADDITIONAL REQUIREMENTS FOR SEISMIC LOADINGS
31 - I3 WIND AND SNOW LOADINGS
32 - APPENDIX J - SAFETY RECOMMENDATIONS
32 - J1 GENERAL
32 - J2 BASIC RECOMMENDATIONS
32 - J2.1 Design and manufacture
32 - J2.2 Use
32 - J3 DESIGN
32 - J3.1 General
32 - J3.2 Design for adequate strength and deflection control
35 - J3.3 Design for safe handling and operation
35 - J3.4 Means of examination
35 - J3.5 Means of isolation, draining and venting
35 - J3.6 Corrosion or other chemical attack
35 - J3.7 Wear
36 - J3.8 Provisions for filling and discharge
36 - J3.9 Protection against exceeding allowable limits
36 - J3.10 Safety accessories
36 - J3.11 External fire
37 - J4 MANUFACTURE
37 - J4.1 Manufacturing procedures
37 - J4.2 Final assessment
38 - J4.3 Marking and labelling
38 - J4.4 Operating instructions
38 - J5 MATERIALS
38 - J5.1 General
39 - J5.2 Materials for pressurized parts
39 - J5.3 Documentation
39 - J5.4 Compliance
39 - J6 SAFETY REQUIREMENTS FOR SPECIAL APPLICATIONS
39 - J6.1 Fired or otherwise heated pressure equipment with a risk of overheating
40 - J6.2 Additional safety recommendations for piping
40 - J7 USE
40 - J7.1 General
40 - J7.2 Equipment operations
40 - J7.3 Safety management system

Sets out basic requirements and good practice for the design, materials, manufacture, examination,testing, installation, conformity assessment, commissioning, operation, inspection, maintenance, repair, alteration and disposal of pressure equipment (boilers, pressure vessels and pressure piping) but excluding gas cylinders. Includes detailed requirements for various pressure equipment by direct reference to a range of Australian, New Zealand and other Standards.

This Standard is a ‘parent’ document for use by the pressure equipment industry in Australia and New Zealand. It covers the design, materials, manufacture, examination, testing, installation, conformity assessment, commissioning, operation, inspection, maintenance, repair, alteration and disposal of pressure equipment (boilers, pressure vessels and pressure piping), but excluding gas cylinders and other equipment as set out in Appendix A.This Standard specifies detailed requirements for various pressure equipment by direct reference to a range of Australian, New Zealand and other Standards.This Standard also sets out general administrative and interpretation provisions which apply to the specified Standards.NOTES:1 Appendix D contains New Zealand regulatory matters.2 Appendix F contains a comparison of pressure equipment Standards.

Committee
ME-001
DocumentType
Standard
ISBN
0 7337 3381 6
Pages
34
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes
UnderRevision

First published as AS CBI Intp2-1963, AS CBI Intp3-1963 and AS CBI Intp5-1967.AS CBI Intp2-1963, AS CBI Intp3-1963 and AS CBI Intp5-1967 revised and redesignated as AS 1200-1972.Second edition 1978.Third edition 1981.Fourth edition 1988.Jointly revised and designated AS/NZS 1200:1994.Sixth edition 2000. Originated as AS CBI Int p2-1963, AS CBI Int p3-1963 and AS CBI Int p5-1967. Previous edition AS/NZS 1200:1994. Sixth edition 2000.

AS 1410-2003 Sterilizers - Steam - Pre-vacuum
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS 1210 SUPP 2-1999 Pressure vessels - Cold-stretched austenitic stainless steel vessels (Supplement to AS 1210-1997)
AS 2593-2004 Boilers - Safety management and supervision systems (Reconfirmed 2016)
AS/NZS 3992:1998 Pressure equipment - Welding and brazing qualification
AS 4343-1999 Pressure equipment - Hazard levels
AS 1210 SUPP 1-1990 Unfired Pressure Vessels - Advanced design and construction (Supplement to AS 1210-1997)
AS 2278-2000 Metal aerosol dispensers of capacity 50 mL to 1000 mL inclusive
AS 3142-1994 Approval and test specification - Electric water heaters
AS/NZS 1841.1:1997 Portable fire extinguishers General requirements
AS/NZS 1841.5:1997 Portable fire extinguishers - Specific requirements for powder type extinguishers
AS 3857-1999 Heat exchangers - Tubeplates - Method of design (Reconfirmed 2016)
AS 2182-1998 Sterilizers - Steam - Benchtop
AS 1228-1997 Pressure equipment - Boilers
AS 1056.1-1991 Storage water heaters General requirements
AS 3920.1-1993 Assurance of product quality Pressure equipment manufacture
AS/NZS 1841.6:1997 Portable fire extinguishers - Specific requirements for carbon dioxide type extinguishers
AS 2030.1-1999 The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene
AS 3873-1995 Pressure equipment - Operation and maintenance
AS/NZS 1841.6:2007 Portable fire extinguishers Specific requirements for carbon dioxide type extinguishers (Reconfirmed 2021)
AS/NZS 1841.8:1997 Portable fire extinguishers Specific requirements for non-rechargeable type extinguishers
AS/NZS 1841.8:2007 Portable fire extinguishers Specific requirements for non-rechargeable type extinguishers (Reconfirmed 2021)
AS 1940-2004 The storage and handling of flammable and combustible liquids
AS 1692-2006 Steel tanks for flammable and combustible liquids
AS/NZS 1841.7:2007 Portable fire extinguishers Specific requirements for vaporizing liquid type extinguishers (Reconfirmed 2021)
AS 4041-1998 Pressure piping
AS Z30-1966 Interconversion of inch and metric dimensions
AS 2971-1987 Serially produced pressure vessels
AS 3892-1995 Pressure equipment - Installation
AS/NZS 1841.1:2007 Portable fire extinguishers General requirements (Reconfirmed 2021)
AS/NZS 1841.2:2007 Portable fire extinguishers Specific requirements for water type extinguishers (Reconfirmed 2021)
AS/NZS 3788:1996 Pressure equipment - In-service inspection
AS 4343-2005 Pressure equipment - Hazard levels
AS/NZS 4481:1997 Pressure equipment - Competencies of inspectors (Reconfirmed 2016)
AS 2487-1981 Dry heat sterilizers (hot air type)
AS/NZS 1841.3:2007 Portable fire extinguishers Specific requirements for wet chemical type extinguishers (Reconfirmed 2021)
AS 3892-2001 Pressure equipment - Installation (Reconfirmed 2016)
AS/NZS 1841.2:1997 Portable fire extinguishers - Specific requirements for water type extinguishers
AS 2593-1995 Boilers - Unattended and limited attendance
AS 1228-2006 Pressure equipment - Boilers
AS 3873-2001 Pressure equipment - Operation and maintenance
AS 4041-2006 Pressure piping (Reconfirmed 2016)
AS 1410-1987 Sterilizers - Steam - Pre-vacuum
AS 4037-1999 Pressure equipment - Examination and testing (Reconfirmed 2016)
AS/NZS 1841.7:1997 Portable fire extinguishers - Specific requirements for vaporizing-liquid type extinguishers
AS 2030.3-1982 The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases - Non-refillable cylinders for compressed gases
AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
AS 2278-1986 Metal aerosol containers
AS 2971-2007 Serially produced pressure vessels (Reconfirmed 2017)
AS 4458-1997 Pressure equipment - Manufacture (Reconfirmed 2016)
AS 3500.4.1-1997 National Plumbing and Drainage Hot water supply systems - Performance requirements
AS/NZS 1841.4:2007 Portable fire extinguishers Specific requirements for foam type extinguishers (Reconfirmed 2021)
AS 2030.4-1985 The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Welded cylinders - Insulated
AS/NZS 3788:2006 Pressure equipment - In-service inspection (Reconfirmed 2017)
AS 2192-2002 Sterilizers - Steam - Downward-displacement
AS 1940-1993 The storage and handling of flammable and combustible liquids
AS/NZS 1841.4:1997 Portable fire extinguishers - Specific requirements for foam type extinguishers
AS 2487-2002 Dry heat sterilizers
AS 1692-1989 Tanks for flammable and combustible liquids
AS/NZS 3509:2003 LP Gas fuel vessels for automotive use
AS/NZS 1841.3:1997 Portable fire extinguishers - Specific requirements for wet-chemical type extinguishers
AS 2192-1991 Sterilizers - Steam - Downward displacement
AS/NZS 3509:1996 LP gas fuel vessels for automotive use
AS/NZS 1841.5:2007 Portable fire extinguishers Specific requirements for powder type extinguishers (Reconfirmed 2021)
AS 2030.2-1996 The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene

AS 3860-1991 Fixed guideway people movers
AS/NZS 1596:2002 The storage and handling of LP Gas
AS/NZS 4114.1:2003 Spray painting booths, designated spray painting areas and paint mixing rooms Design, construction and testing
AS 1470-1986 Health and safety at work - Principles and practices
AS/NZS 3992:1998 Pressure equipment - Welding and brazing qualification
AS 2593-2004 Boilers - Safety management and supervision systems (Reconfirmed 2016)
AS 3892-2001 Pressure equipment - Installation (Reconfirmed 2016)
AS/NZS 3509:2003 LP Gas fuel vessels for automotive use
AS 2129-2000 Flanges for pipes, valves and fittings (Reconfirmed 2016)
AS 1796-2001 Certification of welders and welding supervisors (Reconfirmed 2016)
AS 1210-2010 Pressure vessels (Reconfirmed 2021)
AS 3200-1986 Approval and test specification - Electromedical equipment - General requirements
AS 2865-2009 Confined spaces
AS 1228-2006 Pressure equipment - Boilers
AS 4041-2006 Pressure piping (Reconfirmed 2016)
AS 2809.3-2008 Road tank vehicles for dangerous goods - Road tank vehicles for compressed liquefied gases
AS/NZS 2022:2003 Anhydrous ammonia - Storage and handling (Reconfirmed 2023)
HB 213:2003 Guidelines for safe working in a confined space
AS 1569-1998 Copper and copper alloys - Seamless tubes for heat exchangers (Reconfirmed 2020)
AS/NZS 3130:1995 Approval and test specification - Beauty therapy equipment
AS 4037-1999 Pressure equipment - Examination and testing (Reconfirmed 2016)
AS 2243.6-1990 Safety in laboratories - Mechanical aspects
AS/NZS 2865:2001 Safe working in a confined space
AS 2885.1-2007 Pipelines - Gas and liquid petroleum - Design and construction
AS 3873-2001 Pressure equipment - Operation and maintenance
AS 3920.1-1993 Assurance of product quality Pressure equipment manufacture
AS 2809.3-1999 Road tank vehicles for dangerous goods - Tankers for compressed liquefiable gases
AS 1056.1-1991 Storage water heaters General requirements
AS 3533.1-2009 Amusement rides and devices Design and construction
AS 2980-2004 Qualification of welders for fusion welding of steels
AS/NZS 3788:2006 Pressure equipment - In-service inspection (Reconfirmed 2017)
AS 1853-1983 Automatic oil and gas burners - Mechanical draught
AS/NZS 1596:2008 The storage and handling of LP Gas
AS 1210-1997 Pressure vessels
MP 52-2001 Manual of authorization procedures for plumbing and drainage products
AS 4343-2005 Pressure equipment - Hazard levels
AS 1271-2003 Safety valves, other valves, liquid level gauges and other fittings for boilers and unfired pressure vessels (Reconfirmed 2016)
AS 1375-2013 Industrial fuel-fired appliances
AS 1210 SUPP 1-1990 Unfired Pressure Vessels - Advanced design and construction (Supplement to AS 1210-1997)
AS/NZS 3509:2009 LP Gas fuel vessels for automotive use (Reconfirmed 2019)
AS/NZS 2843.2:2006 Timber preservation plants Treatment area operation (Reconfirmed 2016)
AS/NZS 3788:2001 Pressure equipment - In-service inspection
AS 2885.1-2012 Pipelines - Gas and liquid petroleum Design and construction
AS 4233.2:2013 High pressure water jetting systems Construction and performance
AS/NZS 1596:2014 The storage and handling of LP Gas
AS/NZS 1665:2004 Welding of aluminium structures (Reconfirmed 2016)

View more information
US$82.57
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.