AS/NZS 1477:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-30-2017
09-13-2006
Specifies requirements for PVC pipes and fittings for pressure applications for use below ground or above ground, where they are not exposed to direct sunlight.
This Standard specifies requirements for PVC pipes and fittings for pressure applications for use below ground or above ground, where they are not exposed to direct sunlight.NOTES:Pipes and fittings manufactured to this Standard should be used and installed only in accordance with AS/NZS 2032 and AS/NZS 2566.1, as applicable.
Committee |
PL-021
|
DocumentType |
Standard
|
ISBN |
0 7337 7702 3
|
Pages |
29
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
First published in Australia in part as AS K138-1963.Second edition 1967.Third edition 1969.AS A159 first published 1969.AS A160 first published 1969.Second edition AS A159-1971.AS A159-1971 and part of AS A160-1969 revised, amalgamated and redesignated AS 1477.2-1973.AS K138-1969 revised and redesignated as AS 1477.1-1973.AS 1477.4 first published 1973.AS 1477.6 first published 1973.Second edition AS 1477.1-1988.Second edition AS 1477.4-1988.AS 2977.1 first published 1988.AS 2977.2 first published 1988.AS 2977.3 first published 1988.Second edition AS 1477.6-1989.Second edition AS 1477.2-1990.First published in New Zealand as NZS 7648:1987.AS 1477.1-1988, AS 1477.2-1990, AS 1477.4-1988, AS 1477.6-1989, AS 2977.1-1988, AS 2977.2-1988, AS 2977.3-1989 and NZS 7648:1987 jointly revised and redesignated AS/NZS 1477:1996.Second edition 1999.Third edition 2006. Originated in Australia in part as AS K138-1963. Previous editions AS 1477.1-1988, AS 1477.2-1990, AS 1477.4-1988, AS 1477.6-1989, AS 2977.1-1988, AS 2977.2-1988 and AS 2977.3-1989. Originated in New Zealand as NZS 7648:1987. AS 1477.1-1988, AS 1477.2-1990, AS 1477.4-1988, AS 1477.6-1989, AS 2977.1-1988, AS 2977.2-1988, AS 2977.3-1989 and NZS 7648:1987 jointly revised and redesignated AS/NZS 1477:1996. Third edition 2006.
AS/NZS 3879:2006 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings |
AS 1646.3-2000 | Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds |
AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
AS/NZS 2566.1:1998 | Buried flexible pipelines Structural design |
AS/NZS 2032:2006 | Installation of PVC pipe systems |
AS/NZS 1462.3:1998 | Methods of test for plastics pipes and fittings Method for determining the impact characteristics of pipes (Reconfirmed 2017) |
AS/NZS 1462.11:1996 | Methods of test for PVC pipes and fittings Method for high temperature stress-relief testing of fittings (Reconfirmed 2017) |
HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
AS/NZS 1462.8:1998 | Methods of test for plastics pipes and fittings Method of test for infiltration |
AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
AS/NZS 2280:2004 | Ductile iron pipes and fittings |
AS 1462.9-1984 | Methods of test for unplasticized PVC (UPVC) pipes and fittings Method of hydrostatic pressure testing of UPVC pressure fittings |
AS/NZS 1462.1:2006 | Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings |
AS/NZS 3879:1995 | Solvent cements and priming fluids for use with unplasticized PVC (uPVC) pipes and fittings |
AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
AS 2888.1-2002 | Methods of testing plastics waste fittings Method of determining the suitability of connection threads of BSP form |
AS/NZS 1462.20:1996 | Methods of test for PVC pipes and fittings Method for the determination of long-term failure stress of PVC moulding compounds (Reconfirmed 2017) |
AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
AS/NZS 2544:1995 | Grey iron pressure fittings |
AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
AS 1462.17-1988 | Methods of test for unplasticized PVC (UPVC) pipes and fittings Method for testing pressure pipe joints with elastomeric seals |
AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
AS/NZS 1462.16:2006 | Methods of test for plastics pipes and fittings Method for high temperature testing of pipe (Reconfirmed 2017) |
AS/NZS 1462.6:1998 | Methods of test for plastics pipes and fittings - Method for hydrostatic pressure testing of pipes |
AS/NZS 1462.19:2006 | Methods of test for plastics pipes and fittings C-ring test for fracture toughness of PVC pipes (Reconfirmed 2017) |
AS/NZS 1462.15:1996 | Methods of test for PVC pipes and fittings Method for determination of vinyl chloride monomer content (Reconfirmed 2017) |
AS/NZS 1462.4:2002 | Methods of test for plastics pipes and fittings Method for determining reversion of plastics pipes (Reconfirmed 2017) |
AS/NZS 3835.2:2006 | Earth potential rise - Protection of telecommunications network users, personnel and plant Application guide |
AS/NZS 1547:2012 | On-site domestic wastewater management |
AS 3571.2-2009 | Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure water supply (ISO 10639:2004, MOD) |
AS 1735.17-1995 | Lifts, escalators and moving walks Lifts for people with limited mobility - Restricted use - Water-drive |
AS 2610.1-2007 | Spa pools Public spas (Reconfirmed 2016) |
AS/NZS 1254:2010 | PVC-U pipes and fittings for stormwater and surface water applications |
AS/NZS 1254:2010 | PVC-U pipes and fittings for stormwater and surface water applications |
AS 1926.3-2003 | Swimming pool safety - Water recirculation systems |
AS/NZS 3518:2013 | Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications |
AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
AS/NZS 4026:2001 | Electric cables - For underground residential distribution systems |
ATS 5200.055-2008 | Technical specifications for plumbing and drainage products Plastics fittings - Connectors with flexible intermediate joints for drainage and sewerage applications |
AS/NZS 1547:2000 | On-site domestic wastewater management |
AS/NZS 3500.5:2012 | Plumbing and drainage Housing installations |
AS/NZS 3879:2006 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings |
AS/NZS 1260:2009 | PVC-U pipes and fittings for drain, waste and vent application |
AS/NZS 1260:2017 | PVC-U pipes and fittings for drain, waste and vent applications |
MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
AS/NZS 3879:2011 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings |
AS/NZS 3500.3:2003 | Plumbing and drainage Stormwater drainage |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
AS/NZS 4793:2009 | Mechanical tapping bands for waterworks purposes |
AS 3634-1989 | Solar heating systems for swimming pools (Reconfirmed 2013) |
AS 2610.2-2007 | Spa pools Private spas (Reconfirmed 2016) |
AS 3861-1991 | Spa baths (Reconfirmed 2016) |
AS/NZS 2053.2:2001 | Conduits and fittings for electrical installations Rigid plain conduits and fittings of insulating material (Reconfirmed 2016) |
AS/NZS 1254:2002 | PVC pipes and fittings for storm and surface water applications |
AS 2698.3-1990 | Plastics pipes and fittings for irrigation and rural applications Mechanical joint fittings for use with polyethylene micro-irrigation pipes (Reconfirmed 2017) |
AS/NZS 5601.1:2013 | Gas installations General installations |
AS/NZS 3084:2017 | Telecommunications installations - Telecommunications pathways and spaces for commercial buildings |
AS 3571.1-2009 | Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD) |
AS/NZS 3707:2001 | Method for testing pressure cycling resistance of pipes and fittings |
AS/NZS 5601.1:2010 | Gas installations General installations |
AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
AS 1589-2001 | Copper and copper alloy waste fittings (Reconfirmed 2018) |
AS 5830.2-2012 | In-line ball valves for use in plumbing water supply systems Plastics-bodied |
AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
AS/NZS 1260:2002 | PVC-U pipes and fittings for drain, waste and vent application |
AS/NZS 3835.1:2006 | Earth potential rise - Protection of telecommunications network users, personnel and plant Code of practice |
AS 2419.1-2005 | Fire hydrant installations System design, installation and commissioning |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.