AS/NZS 1477:2017
Current
The latest, up-to-date edition.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
06-01-2017
Specifies requirements for PVC pipes and fittings for pressure applications for use below ground or above ground, where they are not exposed to direct sunlight.
This Standard specifies requirements for PVC pipes and fittings for pressure applications for use below ground or above ground, where they are not exposed to direct sunlight.Appendix B sets out additional requirements for pipes and fittings classed as best environmental practice PVC-U for pressure applications.NOTE: Requirements for the installation and use of pipes and fittings manufactured to this Standard are set out in AS/NZS 2032 and AS/NZS 2566.1, as applicable.
Committee |
PL-021
|
DocumentType |
Standard
|
ISBN |
978 1 76035 779 5
|
Pages |
33
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
Originated in Australia in part as AS K138—1963.Originated in New Zealand as NZS 7648:1987.Previous edition AS/NZS 1477:2006.Fourth edition 2017. Originated in Australia in part as AS K138-1963. Originated in New Zealand as NZS 7648:1987. Previous edition AS/NZS 1477:2006. Fourth edition 2017.
AS ISO 7.2-2008 | Pipe threads where pressure-tight joints are made on the threads Verification by means of limit gauges (Reconfirmed 2017) |
AS/NZS 1462.19:2006 | Methods of test for plastics pipes and fittings C-ring test for fracture toughness of PVC pipes (Reconfirmed 2017) |
AS/NZS ISO 14001:2016 | Environmental management systems - Requirements with guidance for use |
AS/NZS 1462.3:1998 | Methods of test for plastics pipes and fittings Method for determining the impact characteristics of pipes (Reconfirmed 2017) |
AS/NZS 1462.8:2008 | Methods of test for plastics pipes and fittings Method of testing the leaktightness of assemblies (Reconfirmed 2017) |
AS ISO/IEC 17050.2-2005 | Conformity assessment - Supplier’s declaration of conformity Supporting documentation (Reconfirmed 2016) |
AS/NZS 1462.29:2006 | Methods of test for plastics pipes and fittings Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003, MOD) |
AS/NZS 1462.15:1996 | Methods of test for PVC pipes and fittings Method for determination of vinyl chloride monomer content (Reconfirmed 2017) |
AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
AS ISO/IEC 17050.1-2005 | Conformity assessment - Supplier’s declaration of conformity General requirements (Reconfirmed 2016) |
AS/NZS 2032:2006 | Installation of PVC pipe systems |
AS/NZS 1462.1:2006 | Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings |
AS/NZS 2544:1995 | Grey iron pressure fittings |
AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
AS/NZS 1462.20:1996 | Methods of test for PVC pipes and fittings Method for the determination of long-term failure stress of PVC moulding compounds (Reconfirmed 2017) |
AS ISO/IEC 17025-2005 | General requirements for the competence of testing and calibration laboratories (Reconfirmed 2016) |
AS ISO 7.1-2008 | Pipe threads where pressure-tight joints are made on the threads Dimensions, tolerances and designation |
AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
AS/NZS 1462.16:2006 | Methods of test for plastics pipes and fittings Method for high temperature testing of pipe (Reconfirmed 2017) |
AS/NZS 1462.6:2008 | Methods of test for plastics pipes and fittings Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - Resistance to internal pressure (Reconfirmed 2017) |
AS 2888.1-2002 | Methods of testing plastics waste fittings Method of determining the suitability of connection threads of BSP form |
AS/NZS 1462.11:1996 | Methods of test for PVC pipes and fittings Method for high temperature stress-relief testing of fittings (Reconfirmed 2017) |
AS/NZS 1462.4:2002 | Methods of test for plastics pipes and fittings Method for determining reversion of plastics pipes (Reconfirmed 2017) |
AS/NZS 2280:2014 | Ductile iron pipes and fittings |
AS/NZS 2566.1:1998 | Buried flexible pipelines Structural design |
AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
AS 681.1-2008 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
AS/NZS 3879:2011 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings |
AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
AS 2118.1:2017 | Automatic fire sprinkler systems General systems |
AS/NZS 3500.2:2018 | Plumbing and drainage Sanitary plumbing and drainage |
AS/NZS 3500.1:2018 | Plumbing and drainage Water Services |
AS/NZS 4645.1:2018 | Gas distribution networks Network management |
AS 4793:2020 | Mechanical tapping bands for waterworks purposes |
AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
AS/NZS 4020:2018 | Testing of products for use in contact with drinking water |
AS/NZS 4645.3:2018 | Gas distribution networks Plastics pipe systems |
AS 1839:2021 | Swimming pools - Premoulded fibre-reinforced plastics - Installation |
AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.