• There are no items in your cart

AS/NZS 1568:1998

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Copper and copper alloys - Forging stock and forgings
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

05-21-2023

Language(s)

English

Published date

10-05-1998

Preview

Specifies requirements for copper and copper alloy wrought or cast forging stock, and forgings for general engineering purposes. Chemical composition, mechanical properties and manufacturing tolerances are specified, and appendices give purchasing guidelines and information on related composition specifications.

This Standard specifies requirements for copper and copper alloy wrought or cast forging stock, and forgings produced from it by the hot-forging process, intended for engineering purposes.NOTE: Advice and recommendations on information to be supplied at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A.

Committee
MT-002
DocumentType
Standard
ISBN
0 7337 2199 0
Pages
9
ProductNote
Withdrawn 11-09-2018.
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes

First published in Australia in part as part of AS H3-1940 (endorsement of BS 251-1940 without amendment).AS H11 first published 1940 (endorsement of BS 218-1940 without amendment).Second edition AS H3-1968 (endorsement of BS 251:1963 without amendment).Second edition AS H11-1968 (endorsement of BS 218:1963 without amendment).AS H67 first published 1968 (endorsement of BS 1001:1960 without amendment).AS H78 first published 1968 (endorsement of BS 944-1941 without amendment).AS H84 first published 1968 (endorsement of BS 1948:1963 without amendment).AS H85 first published 1968 (endorsement of BS 1949:1963 without amendment).AS H86 first published 1968 (endorsement of BS 2032:1963 without amendment).AS H87 first published 1968 (endorsement of BS 2033:1963 without amendment).AS H90 first published 1968 (endorsement of BS 2872:1962 without amendment).AS H11-1968, AS H67-1968, AS H78-1968, AS H90-1968, and parts of AS H3-1968, AS H84-1968, AS H85-1968, AS H86-1968 and AS H87-1968 revised, amalgamated and redesignated AS 1568-1974.Second edition 1985.Jointly revised and designated AS/NZS 1568:1998. First published in Australia in part as part of AS H3-1940 (endorsement of BS 251-1940 without amendment). AS H11 first published 1940 (endorsement of BS 218-1940 without amendment). Second edition AS H3-1968 (endorsement of BS 251:1963 without amendment). Second edition AS H11-1968 (endorsement of BS 218:1963 without amendment). AS H67 first published 1968 (endorsement of BS 1001:1960 without amendment). AS H78 first published 1968 (endorsement of BS 944-1941 without amendment). AS H84 first published 1968 (endorsement of BS 1948:1963 without amendment). AS H85 first published 1968 (endorsement of BS 1949:1963 without amendment). AS H86 first published 1968 (endorsement of BS 2032:1963 without amendment). AS H87 first published 1968 (endorsement of BS 2033:1963 without amendment). AS H90 first published 1968 (endorsement of BS 2872:1962 without amendment). AS H11-1968, AS H67-1968, AS H78-1968, AS H90-1968, and parts of AS H3-1968, AS H84-1968, AS H85-1968, AS H86-1968 and AS H87-1968 revised, amalgamated and redesignated AS 1568-1974. Second edition 1985. Jointly revised and designated AS/NZS 1568:1998.

AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
AS 2614-1998 Copper and copper alloys - Sampling for chemical and spectrochemical analysis, and physical testing (Reconfirmed 2016)
AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
AS 2345-2006 Dezincification resistance of copper alloys
AS 1391-1991 Methods for tensile testing of metals
AS 2345-1992 Dezincification resistance of copper alloys
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS 1515.1-1994 Copper alloys Determination of lead in copper alloys (flame atomic absorption spectrometric method) (Reconfirmed 2016)

AS 2419.3-2012 Fire hydrant installations Fire brigade booster connections
ATS 5200.016-2010 Technical Specification for plumbing and drainage products Cistern inlet valves
AS 3517-2007 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018)
ATS 5200.004-2005 Technical Specification for plumbing and drainage products Urinal flushing cisterns
AS 1357.1-2004 Valves primarily for use in heated water systems - Protection valves
ATS 5200.042-2004 Technical Specification for plumbing and drainage products - Roll-grooved jointing systems
AS/NZS 2845.1:2010 Water supply - Backflow prevention devices Materials, design and performance requirements
AS 5200.037.2-2008 Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016)
ATS 5200.490-2007 Technical Specification for plumbing and drainage products Cross-linked polyethylene/ aluminium/polyethylene-composite pipe systems for pressure applications (Reconfirmed 2018)
AS/NZS 3499:2006 Water supply - Flexible hose assemblies (Reconfirmed 2016)
AS 1349-1986 Bourdon tube pressure and vacuum gauges (Reconfirmed 2018)
AS/NZS 4020:1999 Products for use in contact with drinking water
ATS 5200.020-2004 Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply
AS 5830.1-2012 In-line ball valves for use in plumbing water supply systems Metal-bodied
AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements
ATS 5200.468-2005 Technical Specification for plumbing and drainage products Hot water systems - Recirculation valves
AS 3688:2016 Water supply and gas systems - Metallic fittings and end connectors
AS 1172.2:2014 Sanitary plumbing products Flushing devices and cistern inlet and outlet valves
AS/NZS 2638.2:2011 Gate valves for waterworks purposes Resilient seated (Reconfirmed 2022)
ATS 5200.017-2005 Technical Specification for plumbing and drainage products Cistern outlet valves
ATS 5200.464-2004 Technical Specification for plumbing and drainage products - Hot water manual or sensor-activated pumping systems
AS 4032.2-2005 Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015)
AS 2419.2-1994 Fire hydrant installations - Fire hydrant valves
AS 4793:2020 Mechanical tapping bands for waterworks purposes
ATS 5200.425-2009 Technical Specification for plumbing and drainage products Water closet (WC) suite with integral odour control device (OCD) connected to sanitary plumbing and drainage system
ATS 5200.476-2006 Technical Specification for plumbing and drainage products Heated water systems - Leak protection device
AS 1357.2-2005 Valves primarily for use in heated water systems Control valves (Reconfirmed 2015)
AS 1628-1999 Water supply - Metallic gate, globe and non-return valves
ATS 5200.478-2006 Technical Specification for plumbing and drainage products Cross-linked polyethylene/Aluminium/Cross-linked polyethylene macro-composite pipe systems for pressure applications
AS/NZS 4793:2009 Mechanical tapping bands for waterworks purposes
ATS 5200.420-2005 Technical Specification for plumbing and drainage products Trap-priming valves
ATS 5200.477-2006 Technical Specification for plumbing and drainage products Rainwater/mains supply changeover devices
ATS 5200.007-2004 Technical Specification for plumbing and drainage products - Water hammer arrestors
ATS 5200.489-2009 Technical Specification for plumbing and drainage products Stainless steel flexible assemblies for plumbing applications
AS 4956-2008 Air valves for water supply
ATS 5200.037.1-2006
AS 2419.2-2009 Fire hydrant installations Fire hydrant valves
AS 4795-2002 Double-flanged butterfly valves for waterworks purposes
AS 4883:2017 Air valves for sewerage
ATS 5200.030-2012 Technical Specification for plumbing and drainage products Solenoid valves
AS/NZS 3718:2005 Water supply - Tap ware (Reconfirmed 2016)
ATS 5200.467-2004 Technical Specification for plumbing and drainage products Rainwater tank connection valve
ATS 5200.482-2006 Technical Specification for plumbing and drainage products Soil waste dump fitting
ATS 5200.466-2004 Technical Specification for plumbing and drainage products - Rainwater tank connection devices
ATS 5200.472-2006 Technical Specification for plumbing and drainage products Heated water system recirculation device
AS 6401-2003 Knife-gate valves for waterworks purposes (Reconfirmed 2015)
AS 4775-2007 Emergency eyewash and shower equipment
AS 4795-2006 Butterfly valves for waterworks purposes
AS 1910-2004 Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016)
AS 4032.4:2014 Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures
ATS 5200.012-2005 Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic
ATS 5200.046-2005 Technical Specification for plumbing and drainage products Diversion systems - Wash down and first flush
ATS 5200.016-2005 Technical Specification for plumbing and drainage products - Cistern inlet valves
AS 5612-2013 Butterfly valves for general purposes
ATS 5200.475-2006 Technical Specification for plumbing and drainage products Heated Water Systems - Cold water recovery device
AS 4956:2017 Air valves for water supply
AS 1357.1-2009 Valves primarily for use in heated water systems Protection valves
ATS 5200.481-2006 Technical Specification for plumbing and drainage products Thermal switching valves
AS 3952-2002 Water supply - Spring hydrant valve for waterworks purposes (Reconfirmed 2015)
AS 5200.007-2008 Plumbing and drainage products Metal-bodied water hammer arresters
AS 2638.1-1999 Sluice valves for waterworks purposes - Metal seated
AS 2738-2000 Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018)
ATS 5200.052-2005 Metallic-bodied inlet pressure control valves greater than DN 50
AS 4795.2-2011 Butterfly valves for waterworks purposes Double flanged
ATS 5200.479-2006 Flood stop safety valve
ATS 5200.030-2004 Technical Specification for plumbing and drainage products - Solenoid valves
AS 3688-2005 Water supply - Metallic fittings and end connectors
AS 1589-2001 Copper and copper alloy waste fittings (Reconfirmed 2018)
AS 5830.2-2012 In-line ball valves for use in plumbing water supply systems Plastics-bodied
AS 2419.3-1996 Fire hydrant installations - Fire brigade booster connections
ATS 5200.485-2006 Pressure compensating tank
ATS 5200.486-2008 Technical Specification for plumbing and drainage products Sprinklers for home applications

View more information
US$34.90
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.