• There are no items in your cart

AS/NZS 2041:1998

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Buried corrugated metal structures
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-26-2021

Language(s)

English

Published date

05-05-1998

Preview

Provides manufacturing requirements, design methods and installation requirements for structures assembled from curved corrugated metal sheet or plates. Structures covered include pipes, pipe-arches, arches and special shapes. Design methods are based on ring compression and buckling failure modes. Information is given on durability. Considerations include handling stiffness, fill requirements and compaction. Tables of maximum and minimum cover are given as a guide to structure selection.

This Standard specifies requirements for materials, manufacture, design methods and installation of buried corrugated metal pipes, pipearches, arches and special shapes comprising bolted corrugated metal sheets or plates manufactured within the limits given in Table 1.1 and Section 2. It deals only with those structures in which the sheets or plates have circumferential corrugations running normal to the longitudinal axis of the structures.The Standard does not cover the design of arch footings, rib stiffening or those structures covered by AS 1761, AS 1762, AS 3703.1 and AS 3703.2.NOTES:1 Ordering guidelines are detailed in Appendix A. Information on the means of demonstrating compliance with this Standard for manufacture of the metal components is given in Appendix B. Information on the assessment of durability is given in Appendix C.2 Buried corrugated metal structures withstand applied loads through the interactive behaviour of the flexible metal ring and the surrounding soil envelope. The stiffness of both of these materials is considered during design.

Committee
CE-025
DocumentType
Standard
ISBN
0 7337 1790 X
Pages
98
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

Under Revision see DR 02334, DR 02335 and DR 02338 First published in Australia as AS A128-1962.Revised and redesignated AS 2041-1977 and AS 2042-1977.Second edition AS 2041-1984.Second edition AS 2042-1984.AS 2041-1984 and AS 2042-1984 jointly revised, amalgamated and designated AS/NZS 2041:1998. First published in Australia as AS A128-1962. Revised and redesignated AS 2041-1977 and AS 2042-1977. Second edition AS 2041-1984. Second edition AS 2042-1984. AS 2041-1984 and AS 2042-1984 jointly revised, amalgamated and designated AS/NZS 2041:1998.

AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
AS/NZS 1112:1996 ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS 4100 SUPP 1-1990 Steel structures - Commentary (Supplement to AS 4100-1990)
AS 1289.5.4.1-2007 Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio (Reconfirmed 2016)
AS 4100 SUPP 1-1999 Steel structures - Commentary (Supplement to AS 4100-1998)
AS 1289.5.1.1-2003 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort
AS 1289.5.4.1-1993 Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
AS 1289.3.6.1-1995 Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving
AS 1289.5.3.2-2004 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer (Reconfirmed 2016)
AS 1289.3.4.1-1995 Methods of testing soils for engineering purposes Soil classification tests - Determination of the linear shrinkage of a soil - Standard method
AS/NZS 1110:1995 ISO metric precision hexagon bolts and screws
AS/NZS ISO 9000.1:1994 Quality management and quality assurance standards Guidelines for selection and use
AS 1397-2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
AS 1289.5.5.1-1998 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method (Reconfirmed 2016)
AS 1289.5.8.1-1995 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-density gauge - Direct transmission mode
AS/NZS 3750.9:1994 Paints for steel structures - Organic zinc-rich primer
AS/NZS 1365:1996 Tolerances for flat-rolled steel products (Reconfirmed 2016)
AS 1289.5.3.5-1997 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method (Reconfirmed 2013)
AS 3703.1-1989 Long-span corrugated steel structures - Materials and manufacture
AS 1650-1989 Hot-dipped galvanized coatings on ferrous articles
AS 3582.1-1998 Supplementary cementitious materials for use with portland and blended cement Fly ash
AS 1214-1983 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series)
AS/NZS 1594:2002 Hot-rolled steel flat products (Reconfirmed 2016)
AS 1289.4.4.1-1997 Methods of testing soils for engineering purposes Soil chemical tests - Determination of the electrical resistivity of a soil - Method for sands and granular materials
AS/NZS 2312:1994 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020)
AS 3703.2-1989 Long-span corrugated steel structures - Design and installation
AS 1594-1989 Hot-rolled steel flat products
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS 1391-1991 Methods for tensile testing of metals
AS 1289.5.3.1-2004 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus (Reconfirmed 2016)
AS 1761-1985 Helical lock-seam corrugated steel pipes
AS/NZS 3500.0:1995 National Plumbing and Drainage Code Glossary of terms
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS 1397-1993 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
AS 1289.5.8.1-2007 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-Density gauge - Direct transmission mode
AS 1275-1985 Metric screw threads for fasteners (Reconfirmed 2017)
AS 1762-1984 Helical lock-seam corrugated steel pipes - Design and installation
AS 1289.5.3.2-1993 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer
AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS 1289.5.1.1-1993 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort
AS 1289.5.6.1-1998 Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material (Reconfirmed 2016)
AS 1289.5.3.1-1993 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus
AS 1289.4.3.1-1997 Methods of testing soils for engineering purposes Soil chemical tests - Determination of the pH value of a soil - Electrometric method
AS 3972-1997 Portland and blended cements
AS/NZS 1252:1996 High-strength steel bolts with associated nuts and washers for structural engineering
AS/NZS ISO 9004.1:1994 Quality management and quality system elements Guidelines
AS/NZS 1111:1996 ISO metric hexagon commercial bolts and screws

AS/NZS 2041.6:2010 Buried corrugated metal structures Bolted plate structures
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS/NZS 2041.4:2010 Buried corrugated metal structures Helically formed sinusoidal pipes
AS/NZS 2566.2:2002 Buried flexible pipelines Installation (Reconfirmed 2016)
AS 5100.3-2004 Bridge design Foundations and soil supporting structures
AS 4799-2000 Installation of underground utility services and pipelines within railway boundaries

View more information
US$134.20
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.