• There are no items in your cart

AS/NZS 2041.2:2011

Current

Current

The latest, up-to-date edition.

Buried corrugated metal structures Installation

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

04-04-2011

Preview

1 - AS/NZS 2041.2:2011 BURIED CORRUGATED METAL STRUCTURES - INSTALLATION
4 - PREFACE
5 - CONTENTS
6 - SECTION 1 SCOPE AND GENERAL
6 - 1.1 SCOPE
6 - 1.2 APPLICATION
6 - 1.3 NORMATIVE REFERENCES
7 - 1.4 DEFINITIONS
7 - 1.4.1 Bedding
7 - 1.4.2 Camber
7 - 1.4.3 Compaction
7 - 1.4.4 Corrugation
8 - 1.4.5 Cover
8 - 1.4.6 Embankment
8 - 1.4.7 Fill, embankment
8 - 1.4.8 Fill, flowable
8 - 1.4.9 Fill, select
8 - 1.4.10 Foundation
8 - 1.4.11 Haunch
8 - 1.4.12 Protective coating
8 - 1.4.13 Skew number
8 - 1.4.14 Spring line
8 - 1.4.15 Trench condition
9 - 1.5 NOTATIONS
10 - 1.6 MARKING OF STRUCTURES
11 - SECTION 2 INSTALLATION
11 - 2.1 GENERAL
11 - 2.2 CONFORMANCE TO THE DESIGN
12 - 2.3 METHOD OF INSTALLATION
12 - 2.4 STRUCTURAL BACKFILL
12 - 2.4.1 Select fill
13 - 2.4.2 Flowable and cement modified select fill
13 - 2.4.3 Extent of structural backfill
16 - 2.4.4 Installation in trench
16 - 2.4.5 Installation in embankment
16 - 2.5 MINIMUM SPACING BETWEEN ADJACENT MULTIPLE STRUCTURES
18 - 2.6 FOUNDATION AND BEDDING
18 - 2.6.1 Foundation
20 - 2.6.2 Camber
20 - 2.6.3 Bedding
21 - 2.6.4 Arches
21 - 2.6.5 Haunch zones for pipe-arches and underpasses
21 - 2.6.6 Transition zones for changing foundation
22 - 2.7 RECEIVING AND HANDLING MATERIALS
22 - 2.8 REPAIR OF DEFECTS AND COATINGS
22 - 2.8.1 General
22 - 2.8.2 Assessment and repair of damaged zinc coatings
23 - 2.8.3 Assessment and repair of damaged aluminized coatings
23 - 2.8.4 Assessment and repair of factory-applied protective coatings
23 - 2.9 ASSEMBLY
23 - 2.9.1 Assembly instructions
23 - 2.9.2 Handling
23 - 2.9.3 Helically formed pipe
23 - 2.9.4 Bolted plate structures
24 - 2.9.5 Bolts and bolt torque for bolted plate structures
24 - 2.10 PLACEMENT
25 - 2.11 OTHER COMPONENTS OF THE STRUCTURE
25 - 2.12 BACKFILLING
25 - 2.12.1 General
25 - 2.12.2 Select fill
25 - 2.12.3 Flowable and cement-modified select fill
25 - 2.12.4 Placement
28 - 2.12.5 Compaction of select fill
28 - 2.13 MINIMUM COVER FOR CONSTRUCTION EQUIPMENT AND ABNORMAL LOADS
29 - 2.14 SHAPE TOLERANCES
29 - 2.14.1 Monitoring of shape during placement of select fill
29 - 2.14.2 Helically formed pipes (final shape)
29 - 2.14.3 Bolted plate structures (final shape)
30 - SECTION 3 END TREATMENT AND INVERT LINING
30 - 3.1 GENERAL
30 - 3.2 END TREATMENT
30 - 3.3 INVERT LINING
31 - 3.4 ALUMINIUM PLATE STRUCTURES
32 - APPENDIX A - GUIDELINES FOR DESIGN INFORMATION FOR SUPPLY AND INSTALLATION
32 - A1 GENERAL
32 - A2 DESIGN INFORMATION TO BE SUPPLIED TO THE MANUFACTURER AND INSTALLER
33 - A3 INFORMATION TO BE SUPPLIED BY THE MANUFACTURER
36 - APPENDIX B - FLOWABLE FILL
36 - B1 GENERAL
36 - B2 MIX PROPORTIONS
36 - B3 MIX FLOWABILITY
37 - B4 GRANULAR MATERIAL GRADING
37 - B5 STRENGTH
37 - B6 PLACEMENT
38 - B7 DURABILITY
39 - BIBLIOGRAPHY

Sets out requirements for the installation of buried corrugated metal structures. Requirements include type and compaction of fill and stiffness considerations for handling. This Standard is for use with AS/NZS2041.1 and other parts in the AS/NZS2041 series.

This Standard specifies requirements for the installation of buried corrugated metal structures intended for use in stormwater drainage and as access tunnels, to support or accommodate roadway and railway and other loadings.Buried corrugated metal structures are flexible members that rely on soil-structure interaction. Correct installation is essential to performance. Adequate compaction of the specified fill material is a requisite for meeting the design criteria for strength.NOTE: Incorrect backfilling procedure may result in collapse of the culvert.

Committee
CE-025
DocumentType
Standard
ISBN
978 0 7337 9807 8
Pages
34
PublisherName
Standards Australia
Status
Current
Supersedes

Originated, in part, as AS 1762-1984, AS 3703.2-1989 and AS/NZS 2041:1998.Revised and redesignated AS/NZS 2041.2:2011. Originated, in part, as AS 1762-1984, AS 3703.2-1989 and AS/NZS 2041:1998. Revised and redesignated AS/NZS 2041.2:2011.

AS 1726-1993 Geotechnical site investigations
AS 1289.5.4.1-2007 Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio (Reconfirmed 2016)
AS 3600-2001 Concrete structures
AS 1012.4.2-1999 Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in air pressure in chamber above concrete
AS 1012.16-1996 Methods of testing concrete Determination of creep of concrete cylinders in compression (Reconfirmed 2014)
AS 1289.5.5.1-1998 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method (Reconfirmed 2016)
AS 1012.4.1-1999 Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in concrete volume with increased air pressure
AS 1289.5.3.2-2004 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer (Reconfirmed 2016)
AS 1012.9-1999 Methods of testing concrete Determination of the compressive strength of concrete specimens
AS 4100 SUPP 1-1999 Steel structures - Commentary (Supplement to AS 4100-1998)
AS 1289.5.1.1-2003 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort
AS 1012.18-1996 Methods of testing concrete Determination of setting time of fresh concrete, mortar and grout by penetration resistance (Reconfirmed 2014)
AS 1012.20-1992 Methods of testing concrete Determination of chloride and sulfate in hardened concrete and concrete aggregates
AS 1012.13-1992 Methods of testing concrete Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory
AS 1012.12.2-1998 Methods of testing concrete Determination of mass per unit volume of hardened concrete - Water displacement method (Reconfirmed 2014)
AS 1012.19.2-2000 Methods of testing concrete Accelerated curing of concrete compression test specimens - Warm water method (Reconfirmed 2014)
AS 1012.17-1997 Methods of testing concrete Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens (Reconfirmed 2014)
AS/NZS 2041.4:2010 Buried corrugated metal structures Helically formed sinusoidal pipes
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS/NZS 3750.9:2009 Paints for steel structures Organic zinc-rich primer (Reconfirmed 2019)
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 1289.5.3.5-1997 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method (Reconfirmed 2013)
AS 1012.10-2000 Methods of testing concrete Determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test) (Reconfirmed 2014)
AS 1289.5.3.1-2004 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus (Reconfirmed 2016)
AS 1012.11-2000 Methods of testing concrete Determination of the modulus of rupture (Reconfirmed 2014)
AS 1012.4.3-1999 Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring air volume when concrete dispersed in water
AS 3600 SUPP 1-1994 Concrete structures - Commentary (Supplement to AS 3600-1994)
AS 1012.3.2-1998 Methods of testing concrete Determination of properties related to the consistency of concrete - Compacting factor test (Reconfirmed 2014)
AS 4100-1998 Steel structures (Reconfirmed 2016)
AS 1012.3.3-1998 Methods of testing concrete Determination of properties related to the consistency of concrete - Vebe test (Reconfirmed 2014)
AS 1012.8.1-2000 Methods of testing concrete Method for making and curing concrete - Compression and indirect tensile test specimens
AS 1012.19.1-2000 Methods of testing concrete Accelerated curing of concrete compression test specimens - Hot water method (Reconfirmed 2014)
AS 1289.5.8.1-2007 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-Density gauge - Direct transmission mode
AS 1012.14-1991 Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength
AS 1012.12.1-1998 Methods of testing concrete Determination of mass per unit volume of hardened concrete - Rapid measuring method (Reconfirmed 2014)
AS 1289.3.4.1-2008 Methods of testing soils for engineering purposes Soil classification tests - Determination of the linear shrinkage of a soil - Standard method
AS 1012.8.2-2000 Methods of testing concrete Method for making and curing concrete - Flexure test specimens
AS 1012.6-1999 Methods of testing concrete Method for the determination of bleeding of concrete
AS/NZS 2041.6:2010 Buried corrugated metal structures Bolted plate structures
AS 1012.3.1-1998 Methods of testing concrete Determination of properties related to the consistency of concrete - Slump test
AS 1012.2-1994 Methods of testing concrete Preparation of concrete mixes in the laboratory
AS 1012.1-1993 Methods of testing concrete Sampling of fresh concrete
AS 1012.21-1999 Methods of testing concrete Determination of water absorption and apparent volume of permeable voids in hardened concrete (Reconfirmed 2014)
AS 1012.3.4-1998 Methods of testing concrete Determination of properties related to the consistency of concrete - Compactibility index (Reconfirmed 2014)
AS 1289.5.6.1-1998 Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material (Reconfirmed 2016)
AS 3600-2009 Concrete structures
AS 1012.5-1999 Methods of testing concrete Determination of mass per unit volume of freshly mixed concrete

AS/NZS 2041.1:2011 Buried corrugated metal structures Design methods
AS 5100.8:2017 Bridge design Rehabilitation and strengthening of existing bridges
AS/NZS 3500.3:2018 Plumbing and drainage Stormwater drainage
AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage

View more information
US$82.57
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.