• There are no items in your cart

AS/NZS 2161.2:1998

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Occupational protective gloves General requirements
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

03-29-2023

Language(s)

English

Published date

01-01-1998

Preview

1 - AS/NZS 2161.2:1998 OCCUPATIONAL PROTECTIVE GLOVES - GENERAL REQUIREMENTS
4 - PREFACE
6 - CONTENTS
7 - 0 Introduction
7 - 1 Scope
7 - 2 Normative references
7 - 3 Definitions
7 - 3.1 hand
7 - 3.2 glove
7 - 3.3 glove palm
7 - 3.4 glove back
7 - 3.5 dexterity
7 - 3.6 hazard
8 - 3.7 level of performance
8 - 4 General requirements
8 - 4.1 Design principles – general
8 - 4.2 Glove construction
8 - 4.3 High visibility gloves
8 - 4.4 Innocuousness of protective gloves
8 - 4.4.1General
8 - 4.4.2 Determination of pH value
9 - 4.4.3 Determination of chromium (VI) content
9 - 4.5 Cleaning
9 - 5 Comfort and efficiency
9 - 5.1 Si zing
9 - 5.1.1 Sizes and measurement of hands
9 - 5.1.2 Sizes and measurements of gloves
9 - 5.1.3 Gloves for special applications
9 - 5.2 Dexterity
9 - 5.3 Water vapour transmission and absorption
10 - 6 Test methods
10 - 6.1 Methods for detection of soluble chromate and determination of chromium (VI)
10 - 6.1.1 Method for detection of soluble chromate
10 - 6.1.2 Photometric determination of chromium (VI) using 1,5-diphenylcarbazide
10 - 6.2 Hand and glove measurement and dimensions
10 - 6.3 Test method for determining gloved finger dexterity
10 - 6.3.1 Number and condition of specimens
10 - 6.3.2 Apparatus required
10 - 6.3.3 Test method
10 - 6.3.4 Test result
11 - 6.4 Test method for determination of water vapour transmission
11 - 6.4.1 Introduction
11 - 6.4.2 Scope
11 - 6.4.3 Principle
11 - 6.4.4 Apparatus
12 - 6.4.5 Specimens
12 - 6.4.6 Preparation of specimens
12 - 6.4.7 Procedure
13 - 6.4.8 Calculation of result
13 - 6.5 Test method for determination of water vapour absorption
13 - 6.5.1 Specimen
13 - 6.5.2 Test apparatus
13 - 6.5.3 Test procedure
13 - 6.5.4 Result
13 - 7 Marking and information
13 - 7.1 General
13 - 7.2 Marking
15 - 7.3 Information and instructions for use
15 - 7.4 Date of obsolescence
16 - Annex A (normative) - Definition of 'For minimal risks only'
17 - Annex B (informative) - Pictograms
18 - Annex C (informative) - Bibliography

Specifies the general requirements for ergonomy, glove construction, high visibility, innocuousness, cleaning, comfort and efficiency, marking and information applicable to occupational protective gloves. The Standard is also applicable to gloves permanently incorporated in containment enclosures. This Standard is technically equivalent to and reproduced from EN 420:1994.

This standard defines the general requirements for ergonomy, glove construction, high visibility, innocuousness, cleaning, comfort and efficiency, marking and information applicable to all protective gloves.It is also applicable to gloves permanently incorporated in containment enclosures. It is not applicable to the following glove types: a) electrician's gloves (see EN 60903); b) medical gloves (see EN 455).

Committee
SF-023
DocumentType
Standard
ISBN
0 7337 1534 6
Pages
12
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

Standards Relationship
BS EN 420:1994 Identical

First published in Australia as part of AS Z4-1952.Second edition 1963.Revised and redesignated AS 2161-1978.First published in New Zealand as part of NZS 1988:1965.Revised and redesignated NZS 5812:1982.AS 2161-1978 and NZS 5812:1982 jointly revised, amalgamated and redesignated in part as AS/NZS 2161.2:1998. First published in Australia as part of AS Z4-1952. Second edition 1963. Revised and redesignated AS 2161-1978. First published in New Zealand as part of NZS 1988:1965. Revised and redesignated NZS 5812:1982. AS 2161-1978 and NZS 5812:1982 jointly revised, amalgamated and redesignated in part as AS/NZS 2161.2:1998.

AS/NZS 2161.5:1998 Occupational protective gloves Protection against cold
AS/NZS 2161.3:1998 Occupational protective gloves Protection against mechanical risks
AS/NZS 4179:1997 Single-use sterile surgical rubber gloves - Specification

AS/NZS 2161.4:1999 Occupational protective gloves Protection against thermal risks (heat and fire) (Reconfirmed 2016)
AS 2507-1998 The storage and handling of agricultural and veterinary chemicals
AS 3961-2005 The storage and handling of liquefied natural gas
AS/NZS 2161.7.3:2005 Occupational protective gloves Protection against cuts and stabs by hand knives - Impact cut test for fabric, leather and other materials
AS 4454-1999 Compost, soil conditioners and mulches
AS 1940-2004 The storage and handling of flammable and combustible liquids
AS/NZS 4757:2002 Handling and destruction of drugs
AS/NZS 4233.1:1999 High pressure water (hydro) jetting systems - Guidelines for safe operation and maintenance
AS 3743-2003 Potting mixes
AS/NZS 2022:2003 Anhydrous ammonia - Storage and handling (Reconfirmed 2023)
AS 4187-1998 Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities
AS/NZS 2243.1:2005 Safety in laboratories Planning and operational aspects
AS/NZS 2161.5:1998 Occupational protective gloves Protection against cold
AS/NZS 4681:2000 The storage and handling of Class 9 (miscellaneous) dangerous goods and articles
AS 4419-2003 Soils for landscaping and garden use
AS 4332-2004 The storage and handling of gases in cylinders (Reconfirmed 2016)
AS/NZS 2161.10.1:2005 Occupational protective gloves Protective gloves against chemicals and micro-organisms - Terminology and performance requirements (Reconfirmed 2016)
AS 4454-2003 Composts, soil conditioners and mulches
AS/NZS 2541:1998 Guide to the cleaning-in-place of dairy factory equipment
AS 4419-1998 Soils for landscaping and garden use
AS/NZS 2161.1:2000 Occupational protective gloves Selection, use and maintenance
AS/NZS 2161.3:1998 Occupational protective gloves Protection against mechanical risks
AS 2601-2001 The demolition of structures
AS/NZS 4081:2001 The storage and handling of liquid and liquefied polyfunctional isocyanates (Reconfirmed 2021)

View more information
US$34.90
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.