• There are no items in your cart

AS/NZS 2280:2004

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Ductile iron pipes and fittings
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

03-08-2023

Published date

08-25-2004

Preview

Specifies requirements for ductile iron pressure pipes centrifugally cast in moulds, and ductile iron fittings of nominal sizes up to and including DN 750, which are intended primarily for conveying water under pressure, but which may be used for conveying sewage or other liquids. Pipes and fittings are classified on the basis of the allowable operating pressure.

This Standard specifies requirements for ductile iron pressure pipes centrifugally cast in moulds, and ductile iron fittings of nominal sizes up to and including DN 750.The specified pipes and fittings are intended primarily for conveying water under pressure, but they may be used for conveying sewage or other liquids.This Standard specifies classifications of pipe on the basis of the allowable operating pressure (AOP); however, Flange Class pipe has been specified for manufacture of flanged pipe with screw-on flanges. NOTE: Ductile iron is also known as spheroidal graphite iron, SG iron or nodular graphite iron.

Committee
WS-016
DocumentType
Standard
ISBN
0 7337 6234 4
Pages
62
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published in Australia as AS 2280-1979.Second edition 1988.Third edition 1991.Jointly revised and designated AS/NZS 2280:1995.Fifth edition 1999.Sixth edition 2004. First published in Australia as AS 2280-1979. Second edition 1988. Third edition 1991. Jointly revised and designated AS/NZS 2280:1995. Fifth edition 1999. Sixth edition 2004.

AS 1831-2007 Ductile cast iron (Reconfirmed 2017)
AS 1111.1-2000 ISO metric hexagon bolts and screws - Product grade C - Bolts
AS 1290.4-1995 Linear measuring instruments used in construction - Retractable steel pocket rules
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS 4087-1996 Metallic flanges for waterworks purposes
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS 1722.1-1975 Pipe threads of Whitworth form Sealing pipe threads (metric units)
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS 1290.5-1999 Linear measuring instruments used in construction - Coated and etched steel measuring tapes
AS 3681-1989 Guidelines for the application of polyethylene sleeving to ductile iron pipelines and fittings
AS/NZS 4158:2003 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes
AS 4087-2004 Metallic flanges for waterworks purposes
AS 3680-1989 Polyethylene sleeving for ductile iron pipelines
AS 1349-1986 Bourdon tube pressure and vacuum gauges (Reconfirmed 2018)
AS 1646.3-2000 Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation
AS 1816.1-2002 Metallic materials - Brinell hardness test Test method (ISO 6506-1:1999, MOD)
AS 3972-1997 Portland and blended cements
AS 2345-1992 Dezincification resistance of copper alloys
AS 2102-1989 Micrometer callipers for external measurement
AS/NZS 2566.1:1998 Buried flexible pipelines Structural design
AS 2101-1978 Internal micrometers (including stick micrometers) (metric series)
HB 18.28-1991 Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products
AS 2758.1-1998 Aggregates and rock for engineering purposes - Concrete aggregates
AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
AS 1646.1-2000 Elastomeric seals for waterworks purposes - General requirements
AS/NZS 3750.4:1994 Paints for steel structures Bitumen paint (Reconfirmed 2013)
AS 1984-1977 Vernier callipers (metric series)
AS 2345-2006 Dezincification resistance of copper alloys
AS 1391-1991 Methods for tensile testing of metals
AS 1831-2002 Ductile cast iron
AS/NZS 4020:2002 Testing of products for use in contact with drinking water
AS 1816.1-2007 Metallic materials - Brinell hardness test Test method (ISO 6506-1:2005, MOD) (Reconfirmed 2017)
AS 4089-1993 Priming paint for steel - Single component - General purpose

AS 1631-1994 Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018)
AS 3571.2-2009 Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure water supply (ISO 10639:2004, MOD)
AS 4087-2004 Metallic flanges for waterworks purposes
AS 5200.000-2006 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018)
AS/NZS 2638.1:2011 Gate valves for waterworks purposes Metal seated (Reconfirmed 2022)
AS 2129-2000 Flanges for pipes, valves and fittings (Reconfirmed 2016)
AS 1646-2007 Elastomeric seals for waterworks purposes (Reconfirmed 2018)
AS 3680-1989 Polyethylene sleeving for ductile iron pipelines
AS/NZS 2638.2:2011 Gate valves for waterworks purposes Resilient seated (Reconfirmed 2022)
AS/NZS 3500.4:2003 Plumbing and drainage Heated water services
AS/NZS 4331.2:1995 Metallic flanges Cast iron flanges (Reconfirmed 2020)
MP 52-2005 Manual of authorization procedures for plumbing and drainage products
AS/NZS 3500.3:2003 Plumbing and drainage Stormwater drainage
AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
AS 4041-2006 Pressure piping (Reconfirmed 2016)
AS 4087:2011 Metallic flanges for waterworks purposes
AS 2638.2-2006 Gate valves for waterworks purposes - Resilient seated
AS 5200.000-2005 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products
AS 3680-2008 Polyethylene sleeving for ductile iron piping (Reconfirmed 2021)
AS 3571.1-2009 Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD)
AS/NZS 4327:1995 Metal-banded flexible couplings for low-pressure applications (Reconfirmed 2020)
AS/NZS 1516:1994 The cement mortar lining of pipelines in situ (Reconfirmed 2020)
AS/NZS 3500.1:2003 Plumbing and drainage Water services
AS 2419.1-2005 Fire hydrant installations System design, installation and commissioning

View more information
US$118.31
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.