This Standard provides examples of area classification for areas associated with the production, processing, handling, transferring and storage of flammable liquids. It is part of the AS/NZS 2430.3 series, which recommends the classification of several commonly occurring situations and should be read in conjunction with AS/NZS 2430.3.1. This Standard also addresses flammable vapours from non-flammable liquids (combustible liquids), and associated equipment other than the process equipment such as pits, waste collection facilities and ventilation air ducts.NOTE: Combustible liquids that are stored, handled or processed at a temperature T = FP -6C (where FP = flashpoint of the liquid) should be considered as flammable liquids. Zonal distances for such liquids should be determined in accordance with this Standard unless a detailed classification in accordance with AS 2430.1 indicates otherwise. The classifications given in Clause 4 are not representative examples of the storage and use of flammable liquids for quantities up to-(a) 100 L in closed containers;(b) 25 L for decanting purposes, e.g. petrol transfer to a motor vehicle or lawn mower; (c) 5 L in open containers for occasional use; or (d) 1 L in open container for continuous use.NOTE: Under some circumstances, particularly in confined spaces, caution should be taken with small quantities of flammable liquids as these may give rise to hazardous areas.For surface coatings and adhesives reference should be made to AS/NZS 2430.3.8 and for flammable liquids (and gases) in refineries and major processing plants reference should made to AS/NZS 2430.3.5, which uses the Generalized Method of classification.NOTE: The classifications given in Clause 4 are based on the assumption that the installations are carried out in accordance with the relevant requirements of the authority having jurisdiction. In general, classifications in accordance with the following codes are acceptable, subject to any additional provisions or modifications as required by the authority:(a) Institute of Petroleum Model Code of Safe Practice in the Petroleum Industry.(b) API RP 500, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities -American Petroleum Institute.(c) BS 5908, Code of practice for fire precautions in the chemical and allied industries.