• There are no items in your cart

AS/NZS 2492:2007

Redesignated
Redesignated

A redesignated Standard is one that has had its number changed. This could be the main number, the part number or the sub-part number.

Cross-linked polyethylene (PE-X) pipes for pressure applications
Published date

07-31-2007

Specifies requirements for cross-linked polyethylene pipes for the conveyance of fluids under pressure.

This Standard specifies requirements for cross-linked polyethylene pipes for the conveyance of fluids under pressure. Such fluids include, but are not restricted to, water, wastewater, slurries, compressed air, and fuel gas. Fuel gas includes natural gas, liquefied petroleum gas (LPG) in the vapour phase and LPG/air mixtures. The partial pressure of the LPG is not to exceed 300 kPa absolute. Pipes intended for the transmission of fuel gas are hereinafter referred to as ‘gas pipes’ and are not be operated at pressures above 1600 kPa gauge.

Committee
PL-006
DocumentType
Standard
ProductNote
Redesignated to AS 2492:2007 by Amendment 1.
PublisherName
Standards Australia
Status
Redesignated
SupersededBy
Supersedes

First published as AS 2492-1981.Second edition 1994.Jointly revised and designated AS/NZS 2492:2007.

AS/NZS 1462.19:2006 Methods of test for plastics pipes and fittings C-ring test for fracture toughness of PVC pipes (Reconfirmed 2017)
AS/NZS 1462.1:2006 Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings
AS/NZS 1462.15:1996 Methods of test for PVC pipes and fittings Method for determination of vinyl chloride monomer content (Reconfirmed 2017)
AS/NZS 4129:2000 Fittings for polyethylene (PE) pipes for pressure applications
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS/NZS 1462.11:1996 Methods of test for PVC pipes and fittings Method for high temperature stress-relief testing of fittings (Reconfirmed 2017)
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS/NZS 1462.13:2006 Methods of test for plastics pipes and fittings Method for the determination of elastomeric seal joint contact width and pressure (Reconfirmed 2017)
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS/NZS 1462.16:2006 Methods of test for plastics pipes and fittings Method for high temperature testing of pipe (Reconfirmed 2017)
AS/NZS 1462.6:1998 Methods of test for plastics pipes and fittings - Method for hydrostatic pressure testing of pipes
AS/NZS 1462.29:2006 Methods of test for plastics pipes and fittings Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003, MOD)
AS/NZS 1462.14:1996 Methods of test for PVC pipes and fittings Method for determination of the light transmission of pipe (Reconfirmed 2017)
AS/NZS 1462.10:1998 Methods of test for plastics pipes and fittings Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications (Reconfirmed 2017)
AS/NZS 1462.27:2003 Methods of test for plastics pipes and fittings Determination of toluene extract of carbon black (Reconfirmed 2017)

AS/NZS 3500.4:2015 Plumbing and drainage Heated water services
AS/NZS 3500.1:2018 Plumbing and drainage Water Services
AS/NZS 4645.1:2018 Gas distribution networks Network management
AS 4176.8-2010 Multilayer pipes for pressure applications Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD)
AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
AS/NZS 3500.4:2003 Plumbing and drainage Heated water services
MP 52-2005 Manual of authorization procedures for plumbing and drainage products
AS 4176-1994 Polyethylene/aluminium and cross-linked polyethylene/aluminium macro-composite pipe systems for pressure applications
AS/NZS 4020:2018 Testing of products for use in contact with drinking water
AS/NZS 5601.1:2013 Gas installations General installations
AS 2537-1994 Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications
AS/NZS 2537.3:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fitness for purpose of the system (ISO 15875-5:2003, MOD) (Reconfirmed 2022)
AS/NZS 3500.4:2018 Plumbing and drainage Heated water services
AS/NZS 3500.1:2003 Plumbing and drainage Water services

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.