• There are no items in your cart

AS/NZS 3012:2010

AvailableSuperseded
AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Electrical installations - Construction and demolition sites
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

06-22-2010

Preview

Sets out requirements for electrical installations which supply electricity to equipment on construction and demolition sites. Includes requirements for the inspection and testing of electrical equipment used on building construction sites.

This Standard sets out minimum requirements for the design, construction and testing of electrical installations that supply electricity to appliances and equipment on construction and demolition sites, and for the in-service testing of portable, transportable and fixed electrical equipment used on construction and demolition sites.For a single domestic residence intended to be occupied as a residential housing unit, or, adjoining units each with a separate exterior entry and intended to be occupied as residential housing units, the requirements of this Standard are varied as detailed in Appendix B.NOTE: The Building Code of Australia (BCA) classification of building and structures is given in Appendix C.The requirements are intended to protect persons, livestock and property from electric shock, fire and physical injury hazards that may arise from an electrical installation that is used with reasonable care and with due regard to the intended purpose of the electrical installation.NOTE: For requirements and recommendations regarding safe working on or near electrical equipment and installations, refer to AS/NZS 4836 and to Codes of Practice or other guidance issued by the regulatory authorities.This Standard applies to electrical installations associated with construction and demolition sites which include - (a) building work, excavation work, compressed air work and diving work;(b) parts of buildings that undergo structural alterations, such as extensions, major repairs or demolition, to the extent that the work necessitates the provision of a temporary electrical installation;(c) work on or in connection with the construction or maintenance of roads, airfields or airstrips, civil engineering works or bridges, or of the permanent way of a railway or tramway;(d) dredging or salvaging work;(e) the laying, lining or maintenance of pipes or cables;(f) earthmoving work carried out with equipment requiring the use of other than manual power;(g) any work in which explosives are used;(h) site offices, cloakrooms, meeting rooms, dormitories, canteens, toilets, appliances and other facilities provided during any work referred to in (a) to (g); and(i) land clearing in preparation for any work referred to in (a) to (g).

Committee
EL-001
DocumentType
Standard
ISBN
978 0 7337 9622 7
Pages
59
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes
UnderRevision

First published in Australia as AS 3012-1990.Jointly revised and designated as Joint Standard AS/NZS 3012:1995.Third edition 2003.Fourth edition 2010. Originated in Australia as AS 3012-1990. Previous edition AS/NZS 3012:2003. Fourth edition 2010. Reissued incorporating Amendment No. 1 (October 2015).

AS/NZS 60598.2.8:2002 Luminaires Particular requirements - Handlamps (IEC 60598-2-8:2001, MOD)
AS 60947.2-2005 Low-voltage switchgear and controlgear - Circuit-breakers
AS/NZS 2802:2000 Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) (Reconfirmed 2020)
AS/NZS 3190:2009 Approval and test specification - Residual current devices (current-operated earth-leakage devices)
AS/NZS 5000.3:2003 Electric cables - Polymeric insulated Multicore control cables (Reconfirmed 2017)
AS/NZS 3010:2005 Electrical installations - Generating sets
AS/NZS 3105:2007 Approval and test specification - Electrical portable outlet devices
AS/NZS 60898.1:2004 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. operation (IEC 60898-1, Ed. 1.2 (2003) MOD)
AS/NZS 60898.2:2004 Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. and d.c. operation (IEC 60898-2, Ed. 1.1 (2003) MOD) (Reconfirmed 2016)
AS/NZS 3001:2008 Electrical installations - Transportable structures and vehicles including their site supplies
AS/NZS 61558.2.23:2001 Safety of power transformers, power supply units and similar devices Particular requirements for transformers for construction sites (IEC 61558-2-23:2000, MOD)
AS/NZS 5000.2:2006 Electric cables - Polymeric insulated For working voltages up to and including 450/750 V (Reconfirmed 2017)
AS/NZS 3120:1999 Approval and test specification - Cord extension sockets
AS 60269.1-2005 Low-voltage fuses - General requirements
AS 2790-1989 Electricity generating sets - Transportable (Up to 25 kW)
AS/NZS 3439.4:2009 Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS)
AS 60269.4.1-2005 Low-voltage fuses Supplementary requirements for fuse-links for the protection of semiconductor devices - Sections I to III - Examples of types of standardized fuse-links
AS/NZS 1680.0:2009 Interior lighting Safe movement (Reconfirmed 2020)
AS/NZS 60598.2.8:1998 Luminaires Particular requirements - Handlamps
AS/NZS 3112:2004 Approval and test specification - Plugs and socket-outlets
AS/NZS 5000.1:2005 Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2017)
AS/NZS 3111:2009 Approval and test specification - Miniature overcurrent circuit-breakers (Reconfirmed 2020)
AS 1735.2-2001 Lifts, escalators and moving walks Passenger and goods lifts - Electric
AS/NZS 3008.1.2:2010 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions
AS 60269.3.0-2005 Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3008.1.1:2009 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS 60269.2.1-2005 Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses
AS/NZS 3191:2008 Electric flexible cords (Reconfirmed 2019)
AS 4086.2-1997 Secondary batteries for use with stand-alone power systems Installation and maintenance
AS/NZS 4763(INT):2006 Safety of Portable Inverters
AS 60269.4.0-2005 Low-voltage fuses Supplementary requirements for fuse-links for the protection of semiconductor devices
AS/NZS 3123:2005 Approval and test specification - Plugs, socket-outlets and couplers for general industrial application (Reconfirmed 2016)
AS/NZS 3760:2003 In-service safety inspection and testing of electrical equipment
AS 60269.3.1-2005 Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Sections I to IV: Examples of types of standardized fuses
AS 2293.1-2005 Emergency escape lighting and exit signs for buildings - System design, installation and operation
AS 60269.2.0-2005 Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: examples of types of standardized fuses
AS/NZS 61009.1:2004 Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules (IEC 61009-1, Ed. 2.1 (2003) MOD)
AS/NZS 61008.1:2004 Residual current operated circuit breakers without integral overcurrent protection for household and similar uses (RCCBs) General rules (IEC 61008-1, Ed. 2.1 (2002) MOD)

AS/NZS 5761:2011 In-service safety inspection and testing - Second-hand equipment prior to sale
AS/NZS 3010:2017 Electrical installations - Generating sets
AS/NZS 4836:2011 Safe working on or near low-voltage electrical installations and equipment
AS/NZS 5762:2011 In-service safety inspection and testing - Repaired electrical equipment
AS/NZS 3190:2016 Approval and test specification - Residual current devices (current operated earth-leakage devices)
AS 4431:2019 Safe working on new lift installations in new constructions
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3190:2011 Approval and test specification - Residual current devices (current-operated earth-leakage devices)
AS/NZS 3007:2013 Electrical equipment in mines and quarries - Surface installations and associated processing plant
AS/NZS 3760:2010 In-service safety inspection and testing of electrical equipment
AS/NZS 2293.1:2018 Emergency lighting and exit signs for buildings System design, installation and operation

View more information
US$81.65
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.