• There are no items in your cart

AS/NZS 3100:2009

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Approval and test specification - General requirements for electrical equipment
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

12-18-2020

Published date

10-30-2009

Preview

Specifies the general safety requirements for, or with respect to, equipment (including fittings, accessories, appliances and apparatus) of classes and types that are used in, or intended for use in, or in connection with, electrical installations in buildings, structures, and premises. It is not applicable to an appliance within the scope of either AS/NZS 3350.1 or AS/NZS 60335.1 or a part 2 of either of these two standards, except where an approval and test specification makes reference to this standard. Guidelines covering design and testing of electrical equipment to ensure safety and protection against electric shock, including the principles and application of double insulation, are contained in Annex D. Users of this Standard may find it helpful to study Annex D before reading the main body of this Standard.

Committee
EL-002
DocumentType
Standard
ISBN
0 7337 9253 7
Pages
104
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published in Australia as AS C100-1937.Redated 1939.Second edition 1940.Redated 1947.Redated 1948.Third edition 1953.Fourth edition 1964.Fifth edition 1971.Sixth edition 1972.Revised and redesignated AS 3100-1982.Second edition 1985.Third edition 1990.Fourth edition 1994.First published in New Zealand as NZS 1300:1958.Second edition 1965.Revised and redesignated NZS 6200:1988.Revised and redesignated NZS/AS 3100:1994.Jointly revised and designated AS/NZS 3100:1997.Sixth edition 2002.Second edition AS/NZS 3100:2002.Third edition AS/NZS 3100:2009. Originated in Australia as C 100—1937.Final Australian edition AS 3100—1994.Originated in New Zealand as NZSS 1300:1965.Final New Zealand edition NZS 6200:1988.Jointly revised and designated AS/NZS 3100:1997.Second edition AS/NZS 3100:2002.Third edition AS/NZS 3100:2009.Reissued incorporating Amendment No. 1 (October 2010).Reissued incorporating Amendment No. 2 (October 2012).Reissued incorporating Amendment No. 3 (June 2014).Reissued incorporating Amendment No. 4 (July2015).

AS/NZS 1125:2001 Conductors in insulated electric cables and flexible cords (Reconfirmed 2017)
AS/NZS 60695.2.11:2001 Fire hazard testing Glowing/hot wire based test methods - Glow-wire flammability test method for end-products (IEC 60695-2-11:2000, MOD)
AS/NZS 60695.2.12:2001 Fire hazard testing Glowing/hot wire based test methods - Glow-wire flammability test method for materials
AS 1931.1-1996 High-voltage test techniques - General definitions and test requirements
AS/NZS 60990:2002 Methods of measurement of touch current and protective conductor current (Reconfirmed 2016)
AS/NZS 60695.2.13:2001 Fire hazard testing Glowing/hot wire based test methods - Glow-wire ignitability test method for materials (IEC 60695-2-13:2000, IDT)
AS/NZS 60065:2003 Audio, video and similar electronic apparatus - Safety requirements (IEC 60065:2001, MOD)
AS/NZS 60695.11.5:2005 Fire hazard testing Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
AS/NZS 61558.2.6:2001 Safety of power transformers, power supply units and similar Particular requirements for safety isolating transformers for general use (IEC 61558-2-6:1997, MOD)
AS/NZS 60695.2.10:2001 Glowing/hot wire based test methods Glow-wire apparatus and common test procedure
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS 1931.2-1996 High-voltage test techniques - Measuring systems
AS/NZS 3191:2008 Electric flexible cords (Reconfirmed 2019)
AS/NZS 3133:2008 Approval and test specification - Air-break switches
AS/NZS 1020:1995 The control of undesirable static electricity
AS 1834.1-1991 Material for soldering Solder alloys (Reconfirmed 2018)
AS 1834.2-1986 Material for soldering Flux-cored solders (Reconfirmed 2018)
AS/NZS 3122:2005 Approval and test specification - Socket-outlet adaptors
AS/NZS 60335.1:2002 Household and similar electrical appliances - Safety General requirements (IEC 60335-1 Ed 4.2, MOD)
AS 60529-2004 Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018)
AS 3158-2004 Electric cables - Glass fibre insulated - For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2016)
AS/NZS 3112:2004 Approval and test specification - Plugs and socket-outlets
AS 60068.2.75-2003 Environmental testing Tests - Test Eh: Hammer tests
AS/NZS 60695.11.10:2001 Fire hazard testing Test flames - 50 W horizontal and vertical flame test methods

AS 4428.4:2016 Fire detection, warning, control and intercom systems - Control and indicating equipment Emergency intercom control and indicating equipment
AS 5262-2011 LP Gas mobile industrial direct fired air heaters
AS/NZS 5761:2011 In-service safety inspection and testing - Second-hand equipment prior to sale
AS 5062:2016 Fire protection for mobile and transportable equipment
AS/NZS 2243.6:2010 Safety in laboratories Plant and equipment aspects
AS/NZS 4871.2:2010 Electrical equipment for mines and quarries Distribution, control and auxiliary equipment
AS/NZS 3003:2018 Electrical installations - Patient areas
AS/NZS 2243.8:2014 Safety in laboratories Fume cupboards
AS/NZS 3105:2012 Approval and test specification - Electrical portable outlet devices
AS/NZS 4871.1:2010 Electrical equipment for mines and quarries General requirements
AS 5156-2010 Electronic speed limit signs
AS 1603.11-2010 Automatic fire detection and alarm systems Visual warning devices
AS 4741-2010 Testing of connections to low voltage electricity networks (Reconfirmed 2021)
AS 2252.6-2011 Controlled environments Clean workstations - Design, installation and use
AS/NZS 5762:2011 In-service safety inspection and testing - Repaired electrical equipment
AS/NZS 3003:2011 Electrical installations - Patient areas
AS 2353:2018 Pedestrian push-button assemblies
AS 2144:2014 Traffic signal lanterns
AS/NZS 3105:2014 Approval and test specification - Electrical portable outlet devices
AS/NZS 3120:2011 Approval and test specification - Cord extension sockets
AS 2578-2009 Traffic signal controllers
AS/NZS 3190:2016 Approval and test specification - Residual current devices (current operated earth-leakage devices)
AS 2067:2016 Substations and high voltage installations exceeding 1 kV a.c.
AS/NZS 3133:2013 Approval and test specification - Air-break switches
AS/NZS 4871.1:2012 Electrical equipment for mines and quarries General requirements
AS/NZS 3112:2017 Approval and test specification - Plugs and socket-outlets
AS 3864.1-2012 Medical refrigeration equipment - For the storage of blood and blood products Manufacturing requirements
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3190:2011 Approval and test specification - Residual current devices (current-operated earth-leakage devices)
AS/NZS 3007:2013 Electrical equipment in mines and quarries - Surface installations and associated processing plant
AS 4233.2:2013 High pressure water jetting systems Construction and performance
AS/NZS 3112:2011 Approval and test specification - Plugs and socket-outlets

View more information
US$143.97
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.