• There are no items in your cart

AS/NZS 3191:1996

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Approval and test specification - Electric flexible cords
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-30-2017

Published date

01-01-1996

Preview

1 - AS/NZS 3191:1996 APPROVAL AND TEST SPECIFICATION-ELECTRIC FLEXIBLE CORDS
4 - PREFACE
5 - CONTENTS
9 - SECTION 1 SCOPE AND GENERAL
9 - 1.1 SCOPE
9 - 1.2 REFERENCED DOCUMENTS
9 - 1.3 DEFINITIONS
9 - 1.3.1 Approximate value
10 - 1.3.2 Core
10 - 1.3.3 Flexible cord
10 - 1.3.4 Maximum continuous conductor temperature
10 - 1.3.5 Multicore cord
10 - 1.3.6 Pitch circle diameter
10 - 1.3.7 Routine tests
10 - 1.3.8 Sample tests
10 - 1.3.9 Type tests
10 - 1.3.10 Voltage designation
10 - 1.4 MAXIMUM CONTINUOUS CONDUCTOR TEMPERATURE
10 - 1.5 VOLTAGE DESIGNATION
12 - SECTION 2 THERMOPLASTIC PVC OR CROSSLINKED ELASTOMER INSULATED FLEXIBLE CORDS
12 - 2.1 CONDUCTORS
12 - 2.2 INSULATION
12 - 2.2.1 Material
12 - 2.2.2 Application
13 - 2.2.3 Thickness
13 - 2.2.4 Tests
13 - 2.2.5 Criteria
13 - 2.2.6 Core identification
13 - 2.3 LAY-UP OF CORES
13 - 2.4 FILLERS AND BINDERS
14 - 2.5 SCREENS
14 - 2.5.1 Composite braid screen
16 - 2.5.2 All copper braid screen
16 - 2.6 SHEATH
16 - 2.6.1 Material
17 - 2.6.2 Application
17 - 2.6.3 Thickness
17 - 2.6.4 Tests
17 - 2.6.5 Criteria
17 - 2.6.6 Colour
17 - 2.7 NON-METALLIC BRAID
17 - 2.8 MARKING
17 - 2.8.1 Information to be marked
18 - 2.8.2 Means of marking
19 - 2.8.3 Marking of coils or reels
19 - 2.9 TESTS
20 - 2.10 CONSTRUCTION AND DIMENSIONS
20 - 2.10.1 General
23 - 2.10.2 Construction of 250/250 V crosslinked elastomer insulated, textile braided 2- and 3-core flexible cords
24 - 2.10.3 Construction of 250/440 V crosslinked elastomer insulated and sheathed ordinary duty 2-, 3-, 4- and 5-core...
25 - 2.10.4 Construction of 250/250 V crosslinked elastomer insulated, unprotected single-core flexible cords
26 - 2.10.5 Construction of 250/440 V crosslinked elastomer insulated, sheathed, screened and overall sheathed 2-, 3- and 4...
27 - 2.10.6 Construction of 250/440 V R-S-150 crosslinked elastomer insulated and GP-150-S sheathed ordinary duty 2- and 3...
28 - 2.10.7 Construction of 250/250 V R-S-150 crosslinked elastomer insulated, glass fibre braided, single-, 2- and 3-core...
29 - 2.10.8 Construction of 250/440 V ordinary duty or 0.6/1 kV heavy duty thermoplastic PVC insulated, unprotected single...
30 - 2.10.9 Construction of 250/250 V thermoplastic PVC insulated, unprotected, parallel-webbed 2-core flat flexible cords
31 - 2.10.10 Construction of 250/440 V thermoplastic PVC insulated and sheathed, ordinary duty 2-, 3-, 4- and 5-core circular...
32 - 2.10.11 Construction of 250/440 V thermoplastic PVC insulated and sheathed, ordinary duty 2-core flat flexible cords
33 - 2.10.12 Construction of 250/250 V thermoplastic PVC insulated and sheathed, light duty 2-core flat, and 2- or 3-core...
34 - 2.10.13 Construction of 250/250 V thermoplastic PVC insulated, textile braided 2- and 3-core flexible cords
35 - 2.10.14 Construction of 250/440 V thermoplastic PVC insulated, sheathed, screened and overall sheathed 2-, 3- and 4-core...
36 - 2.10.15 Construction of 0.6/1 kV crosslinked elastomer insulated and sheathed, heavy duty single-core flexible cords
37 - 2.10.16 Construction of 0.6/1 kV thermoplastic PVC insulated and sheathed, heavy duty single-core flexible cords
38 - 2.10.17 Construction of 0.6/1 kV crosslinked elastomer insulated and sheathed, heavy duty 2-, 3-, 4- and 5-core circular...
39 - 2.10.18 Construction of 0.6/1 kV thermoplastic PVC insulated and sheathed, heavy duty 2-, 3-, 4- and 5-core circular...
40 - SECTION 3 CROSSLINKED PVC INSULATED FLEXIBLE CORDS
40 - 3.1 CONDUCTORS
40 - 3.2 INSULATION
40 - 3.2.1 Material
40 - 3.2.2 Application
40 - 3.2.3 Thickness
40 - 3.2.4 Tests
40 - 3.2.5 Criteria
40 - 3.2.6 Core identification
41 - 3.3 LAY-UP OF CORES
41 - 3.4 FILLERS AND BINDERS
42 - 3.5 SHEATH
42 - 3.5.1 Material
42 - 3.5.2 Application
42 - 3.5.3 Thickness
42 - 3.5.4 Tests
42 - 3.5.5 Criteria
42 - 3.5.6 Colour
43 - 3.6 TEXTILE BRAID
43 - 3.7 MARKING
43 - 3.7.1 Information to be marked
43 - 3.7.2 Means of marking
44 - 3.7.3 Marking of coils or reels
44 - 3.8 TESTS
44 - 3.9 CONSTRUCTION AND DIMENSIONS
44 - 3.9.1 General
46 - 3.9.2 Construction of 250/440 V crosslinked PVC insulated and sheathed, ordinary duty 2-, 3-, 4- and 5-core circular...
47 - 3.9.3 Construction of 250/440 V crosslinked PVC insulated and sheathed, ordinary duty 2-core flat flexible cords
48 - 3.9.4 Construction of 250/250 V crosslinked PVC insulated and sheathed, light duty 2-core flat, and 2- or 3-core circular...
49 - 3.9.5 Construction of 250/250 V crosslinked PVC insulated, textile braided 2- and 3- core flexible cords
50 - SECTION 4 THERMOPLASTIC ELASTOMER INSULATED FLEXIBLE CORDS
50 - 4.1 GENERAL
50 - 4.2 CONDUCTORS
50 - 4.3 INSULATION
50 - 4.3.1 Material
50 - 4.3.2 Application
50 - 4.3.3 Thickness
50 - 4.3.4 Tests
50 - 4.3.5 Criteria
50 - 4.3.6 Core identification
51 - 4.4 LAY-UP OF CORES
51 - 4.5 FILLERS AND BINDERS
51 - 4.6 SCREENS
51 - 4.7 SHEATH
51 - 4.7.1 Material
52 - 4.7.2 Application
52 - 4.7.3 Thickness
52 - 4.7.4 Tests
52 - 4.7.5 Criteria
52 - 4.7.6 Colour
52 - 4.8 TEXTILE BRAID
52 - 4.9 MARKING
52 - 4.9.1 Information to be marked
53 - 4.9.2 Means of marking
53 - 4.9.3 Marking of coils or reels
53 - 4.10 TESTS
53 - 4.11 CONSTRUCTION AND DIMENSIONS
53 - 4.11.1 General
55 - 4.11.2 Construction 250/250 V thermoplastic elastomer insulated, textile braided 2- and 3-core flexible cords
56 - 4.11.3 Construction of 250/250 V thermoplastic elastomer insulated, textile braided circular kink resistant 2- and 3-core...
57 - 4.11.4 Construction of 250/440 V thermoplastic elastomer insulated and sheathed, ordinary duty 2-, 3-, 4-, and 5-core...
58 - 4.11.5 Construction of 250/440 V thermoplastic elastomer insulated, sheathed, screened and overall sheathed 2-, 3- and 4...
59 - SECTION 5 GLASS FIBRE INSULATED FLEXIBLE CORDS
59 - 5.1 CONDUCTORS
59 - 5.2 INSULATION
59 - 5.2.1 Material
59 - 5.2.2 Application
59 - 5.2.3 Thickness
59 - 5.2.4 Core identification
60 - 5.3 LAY-UP OF CORES
60 - 5.4 FILLERS
60 - 5.5 GLASS FIBRE PROTECTIVE BRAID
60 - 5.6 MARKING
60 - 5.6.1 Information to be marked
60 - 5.6.2 Means of marking
60 - 5.6.3 Marking of coils or reels
61 - 5.7 TESTS
61 - 5.8 CONSTRUCTION AND DIMENSIONS
61 - 5.8.1 General
63 - 5.8.2 Construction of 0.6/1 kV glass fibre insulated and glass braid protected single-, 2- and 3-core flexible cords
64 - 5.8.3 Construction of 0.6/1 kV glass fibre insulated, unprotected, single-core flexible cords
65 - SECTION 6 THERMOPLASTIC FLUOROPOLYMER INSULATED FLEXIBLE CORDS
65 - 6.1 CONDUCTORS
65 - 6.2 INSULATION
65 - 6.2.1 Material
65 - 6.2.2 Application
65 - 6.2.3 Thickness
65 - 6.2.4 Core identification
65 - 6.3 MARKING OF COILS OR REELS
66 - 6.4 TESTS
67 - 6.5 CONSTRUCTION AND DIMENSIONS
68 - APPENDIX A - PURCHASING GUIDELINES
69 - APPENDIX B - NOTES ON CALCULATION OF DIMENSIONS OF FLEXIBLE CORDS
69 - B1 APPROXIMATE OVERALL DIMENSIONS
69 - B2 TOLERANCE
69 - B3 DIMENSIONAL ALLOWANCE
71 - APPENDIX C - TEST FOR RESISTANCE TO HEAT OF TEXTILE BRAIDS
71 - C1 GENERAL
71 - C2 APPARATUS
71 - C2.1
71 - C2.2
71 - C2.3
71 - C2.4
71 - C3 SAMPLE
71 - C4 PREPARATION
71 - C5 TEST PROCEDURE
71 - C6 CRITERIA
73 - APPENDIX D - AS/NZS 3191 REPLACEMENT CORDS FOR IEC CORDS
74 - AMENDMENT CONTROL SHEET

Specifies construction, dimensions and tests for flexible cords insulated with thermoplastic or crosslinked PVC, thermoplastic or crosslinked elastomers, glass fibre or thermoplastic fluoropolymers for working voltages up to and including 250/250 volt, 250/440 V or 0.6/1 kV.

This Standard specifies construction, dimensions and tests for flexible cords insulated with thermoplastic or crosslinked PVC, thermoplastic or crosslinked elastomers, glass fibre or thermoplastic fluoropolymers which, dependent on cord type, are designed for working voltages up to and including 250/250 V, 250/440 V or 0.6/1 kV. Compliance with this Standard does not necessarily imply suitability for end use. End applications shall be considered to ensure appropriate cord selection.NOTES:1 This Standard is intended to apply only to flexible cords of the types and sizes which are included. It is not intended, however, that other types or sizes of flexible cord should be precluded from use, and regulatory authorities will consider the issue of a Certificate of Suitability for connection to the supply mains under the non-declared scheme for other types and sizes as they are developed. Any application for such certification should be accompanied by a description of the flexible cord.2 Purchasing guidelines are contained in Appendix A.3 AS/NZS 3350 series of appliance Standards is being issued, nominating flexible cords to IEC 227 and IEC 245. Appendix D will facilitate the selection of cords to AS/NZS 3191, which should replace the designated IEC cords.

Committee
EL-003
DocumentType
Standard
ISBN
0 7337 0604 5
Pages
65
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

Amendment 1 to AS/NZS 3191:1996 see DR 96452. Amendment 2 to AS/NZS 3191:1996 See DR 97471 CP. Amendment 4 see DR 01381 CP. Under Revision see DR 02436 First published in Australia in part as AS C147-1950.Second edition 1955.AS C158 first published 1959.Second edition 1965.Third edition AS C147-1967.Fourth edition 1969.Fifth edition 1972.Part of AS C147-1972 and AS C158-1965 revised, amalgamated and redesignated AS 3191-1974.Second edition 1981.Third edition 1991.Fourth edition 1994.First published in New Zealand as NZS/AS 3191:1994.Revised and designated AS/NZS 3191:1996. First published in Australia in part as AS C147-1950. Second edition 1955. AS C158 first published 1959. Second edition 1965. Third edition AS C147-1967. Fourth edition 1969. Fifth edition 1972. Part of AS C147-1972 and AS C158-1965 revised, amalgamated and redesignated AS 3191-1974. Second edition 1981. Third edition 1991. Fourth edition 1994. First published in New Zealand as NZS/AS 3191:1994. Revised and designated AS/NZS 3191:1996.

AS 3109.1-1987 Approval and test specification - Appliance couplers for household and similar general purposes - General requirements
AS 1125-1993 Conductors in insulated electric cables and flexible cords
AS 3000-1986 Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules)

AS/NZS 3001:2001 Electrical installations - Relocatable premises (including caravans and tents) and their site installations
AS/NZS 3100:1997 Approval and test specification - General requirements for electrical equipment
AS/NZS 3350.2.55:1998 Safety of household and similar electrical appliances Particular requirements - Electrical appliances for use with aquariums and garden ponds
AS/NZS 3350.2.53:1998 Safety of household and similar electrical appliances Particular requirements - Sauna heating appliances
AS/NZS 3018:2001 Electrical installations - Domestic installations
AS/NZS 60928:2000 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements (IEC 60928:1995 MOD)
AS/NZS 3123:2000 Approval and test specification - Plugs, socket-outlets and couplers for general industrial application
AS/NZS 3105:2002 Approval and test specification - Electrical portable outlet devices
AS/NZS 3350.2.30:1997 Safety of household and similar electrical appliances Particular requirements - Room heaters
AS 3811-1998 Hard-wired patient alarm systems
AS/NZS 3109.1:1996 Approval and test specification - Appliance couplers for household and similar general purposes General requirements
AS/NZS 61558.2.6:2001 Safety of power transformers, power supply units and similar Particular requirements for safety isolating transformers for general use (IEC 61558-2-6:1997, MOD)
AS/NZS 3350.1:2000 Safety of household and similar electrical appliances General requirements (IEC 60335-1:1994 MOD)
AS/NZS 3350.2.31:1997 Safety of household and similar electrical appliances Particular requirements - Range hoods
AS 61010.1-2003 Safety requirements for electrical equipment for measurement, control and laboratory use General requirements (IEC 61010-1:2001, MOD) (Reconfirmed 2016)
AS/NZS 3350.2.8:1995 Safety of household and similar electrical appliances Particular requirements - Shavers, hair clippers and similar appliances
AS/NZS 3200.1.0-1998 Medical electrical equipment General requirements for safety - Parent Standard
HB 213:2003 Guidelines for safe working in a confined space
AS/NZS 3350.2.13:1997 Safety of household and similar electrical appliances Particular requirements - Deep fat fryers, frying pans and similar appliances
AS/NZS 60065:2003 Audio, video and similar electronic apparatus - Safety requirements (IEC 60065:2001, MOD)
AS/NZS 3350.2.75:1997 Safety of household and similar electrical appliances Particular requirements - Commercial dispensing appliances and vending machines
AS/NZS 3350.2.24:1998 Safety of household and similar electrical appliances Particular requirements - Refrigerating appliances and ice-makers
AS 3533.1-1997 Amusement rides and devices - Design and construction
AS/NZS 3136:2001 Approval and test specification - Electrical equipment for spa and swimming pools
AS/NZS 3808:1998 Insulating and sheathing materials for electric cables
AS/NZS 2865:2001 Safe working in a confined space
AS/NZS 3105:1998 Approval and test specification - Electrical portable outlet devices
AS/NZS 3350.2.76:1998 Safety of household and similar electrical appliances Particular requirements - Electric fence energizers
AS/NZS 60745.1:2003 Hand-held motor-operated electric tools - Safety General requirements (IEC 60745-1:2001, MOD)
AS/NZS 3008.1.2:1998 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand installation conditions
AS 4691.1-2003 Laser-based speed detection devices Definitions and device requirements
AS/NZS 3350.2.79:1996 Safety of household and similar electrical appliances Particular requirements - High pressure cleaners and steam cleaners, for industrial and commercial use
AS/NZS 1972:2002 Electric cables - Underground coal mines - Other than reeling and trailing
AS 3106-2002 Approval and test specification - Electric jugs (with non-metallic bodies)
AS/NZS 3350.2.15:1997 Safety of household and similar electrical appliances Particular requirements - Appliances for heating liquids
AS/NZS 3350.2.41:1997 Approval and test specification - Safety of household and similar electrical appliances Particular requirements - Pumps for liquids having a temperature not exceeding 35 degrees Celsius
AS/NZS 7450.1:1999 Safety of hand-held motor-operated electric tools General requirements
AS/NZS 3164:1994 Approval and test specification - Safety of electrically heated blankets, pads and similar flexible heating appliances for household use
AS 3100-1994 Approval and test specification - General requirements for electrical equipment
AS/NZS 61558.1:2000 Safety of power transformers, power supply units and similar General requirements and tests (IEC 61558-1 Ed 1.1, MOD)
AS/NZS 3160:2001 Approval and test specification - Hand-held portable electric tools
AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 60598.2.20:2002 Luminaires Particular requirements - Lighting chains (IEC 60598-2-20:1996, MOD)
AS/NZS 3350.2.40:1997 Safety of household and similar electrical appliances Particular requirements - Electrical heat pumps, air-conditioners and dehumidifiers
AS/NZS 3008.1.1:1998 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS/NZS 3102:2002 Approval and test specification - Electric duct heaters (Reconfirmed 2016)
AS/NZS 3199:2000 Approval and test specification for cord extension sets - Cord extension sets
AS/NZS 3808:2000 Insulating and sheathing materials for electric cables
AS/NZS 3350.2.45:1997 Safety of household and similar electrical appliances Particular requirements - Portable heating tools and similar appliances
AS/NZS 3350.2.66:1997 Safety of household and similar electrical appliances Particular requirements - Water-bed heaters

View more information
US$98.41
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.