Customer Support: +1 416-401-8730

Login to i2i Subscription Intertek.com
  • There are no items in your cart
Please enter a keyword to search
Advanced search

AS/NZS 3500.4:2003

AvailableSuperseded
AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Plumbing and drainage Heated water services
Available format(s)

Hardcopy , Hardcopy with incorporated amendment , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

12-15-2003

Publisher

Standards Australia

Preview

This Standard sets out the requirements for the design and installation of heated water services. It includes aspects of the installation from, and including, the valve(s) on the cold water inlet to any cold water storage tank or water heater and the downstream fixtures and fittings.

This Standard sets out the requirements for the installation of heated water services using drinking water. It includes aspects of the installation from, and including, the valve(s) on the cold water inlet to any cold water storage tank or water heater and the downstream fixtures and fittings. It applies to new installations as well as alterations, additions and repairs to existing installations. This Standard applies to the installation of the following types of water heaters (see Clause 5.2.1 or Clause 6.3.1): (a) Storage water heaters with a rated delivery or capacity of up to 700 L per heater. (b) Heat exchange water heaters. NOTE: Electric heat exchange water heaters are defined in AS 1361, and other fuel sources are covered in the applicable standards e.g., AS/NZS 2712, AS 4552. (c) Instantaneous water heaters. (d) All authorized water heaters. Illustrations used in this Standard are diagrammatic only and have been chosen without prejudice.

Committee
WS-014
DocumentType
Standard
ISBN
0 7337 5495 3
Pages
132
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes
UnderRevision

First published as AS CA51-1968.Revised and redesignated as AS 1529-1974.AS 2002 first published 1979.Second edition 1981.Third edition 1987.AS 1529-1974 and AS 2002-1987 revised, amalgamated and redesignated AS 3500.4-1990.Second edition 1994.Jointly revised and redesignated AS/NZS 3500.4.2:1997.AS/NZS 3500.4.2:1997 jointly revised and redesignated as AS/NZS 3500.4:2003. Originated as AS CA51-1968 and AS 1529-1974. Previous edition AS/NZS 3500.4.2:1997. AS/NZS 3500.4.2:1997 jointly revised and redesignated as AS/NZS 3500.4:2003. Reissued incorporating Amendment No. 1 (November 2005). Reissued incorporating Amendment No. 2 (December 2010).

AS/NZS 1167.2:1999 Welding and brazing - Filler metals Filler metal for welding
AS 2492-1994 Cross-linked polyethylene (PE-X) pipe for hot and cold water applications
AS 5601-2004 Gas installations
AS 1357.1-2004 Valves primarily for use in heated water systems - Protection valves
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS 1910-2004 Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016)
MP 52-2005 Manual of authorization procedures for plumbing and drainage products
AS 1170.2-1989 Minimum design loads on structures (known as the SAA Loading Code) Wind loads
AS/NZS 1260:2002 PVC-U pipes and fittings for drain, waste and vent application
AS 1684.3-1999 Residential timber-framed construction Cyclonic areas
AS 4234-1994 Solar water heaters - Domestic and heat pump - Calculation of energy consumption
AS 1684.2-1999 Residential timber-framed construction Non-cyclonic areas
AS/NZS 2712:2002 Solar and heat pump water heaters - Design and construction
AS 1528.1-2001 Tubes (stainless steel) and tube fittings for the food industry Tubes
AS/NZS 2712:2007 Solar and heat pump water heaters - Design and construction (Reconfirmed 2020)
AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS 3518.1-1988 Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Pipes
AS 4032.2-2005 Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015)
AS 1379-2007 Specification and supply of concrete (Reconfirmed 2017)
AS 1691-1985 Domestic oil-fired appliances - Installation
AS 1910-1994 Water supply - Float control valves for use in hot and cold water
AS 1566-1997 Copper and copper alloys - Rolled flat products (Reconfirmed 2018)
AS 1357.2-2005 Valves primarily for use in heated water systems Control valves (Reconfirmed 2015)
MP 52-2001 Manual of authorization procedures for plumbing and drainage products
AS/NZS 4671:2001 Steel reinforcing materials
AS/NZS 2642.2:1994 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications
AS 1477.2-1990 Unplasticized PVC (UPVC) pipes and fittings for pressure applications - Moulded fittings
AS/NZS 4331.3:1995 Metallic flanges Copper alloy and composite flanges (Reconfirmed 2020)
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS 1357.2-1998 Valves primarily for use in warm and hot water systems - Control valves
AS 2239-2003 Galvanic (sacrificial) anodes for cathodic protection
AS/NZS 4020:2002 Testing of products for use in contact with drinking water
AS 2537-1994 Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications
AS 3688-1994 Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors
AS 1684.1-1999 Residential timber-framed construction Design criteria
AS/NZS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applications
AS 1074-1989 Steel tubes and tubulars for ordinary service (Reconfirmed 2018)
AS 1357.1-1992 Water supply - Valves for use with unvented water heaters - Protection valves
AS 3600-2001 Concrete structures
AS 1646-2007 Elastomeric seals for waterworks purposes (Reconfirmed 2018)
AS 1604.1-2000 Specification for preservative treatment - Sawn and round timber
AS 1361-1995 Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016)
AS 4176-1994 Polyethylene/aluminium and cross-linked polyethylene/aluminium macro-composite pipe systems for pressure applications
AS 3498-2003 Authorization requirements for plumbing products - Water heaters and hot-water storage tanks
AS 4087-1996 Metallic flanges for waterworks purposes
AS 1432-1996 Copper tubes for plumbing, gasfitting and drainage applications
AS 3795-1996 Copper alloy tubes for plumbing and drainage applications
AS/NZS 4129:2000 Fittings for polyethylene (PE) pipes for pressure applications
AS 1604.1-2005 Specification for preservative treatment - Sawn and round timber
AS 2984-1987 Solar water heaters - Test for thermal performance - Outdoor test
AS 4552-2005 Gas fired water heaters for hot water supply and/or central heating
AS/NZS 3666.2:2002 Air-handling and water systems of buildings - Microbial control Operation and maintenance
AS 1432-2004 Copper tubes for plumbing, gasfitting and drainage applications
AS/NZS 2280:1999 Ductile iron pressure pipes and fittings
AS 1167.1-1993 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS 1722.1-1975 Pipe threads of Whitworth form Sealing pipe threads (metric units)
AS/NZS 4331.2:1995 Metallic flanges Cast iron flanges (Reconfirmed 2020)
AS 1379-1997 Specification and supply of concrete
AS/NZS 2878:2000 Timber - Classification into strength groups
AS/NZS 1170.2:2002 Structural design actions Wind actions
AS 1345-1995 Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018)
AS 4087-2004 Metallic flanges for waterworks purposes
AS 1646.3-2000 Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
AS 1478.1-2000 Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018)
AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation
AS 2813-1985 Solar water heaters - Method of test for thermal performance - Simulator method
AS/NZS 2280:2004 Ductile iron pipes and fittings
AS/NZS 1167.1:2005 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS/NZS 4331.1:1995 Metallic flanges Steel flanges (Reconfirmed 2020)
AS/NZS 2642.3:1994 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
AS/NZS 2544:1995 Grey iron pressure fittings
AS/NZS 1477:1999 PVC pipes and fittings for pressure applications
AS/NZS 3500.1:2003 Plumbing and drainage Water services
AS 2129-2000 Flanges for pipes, valves and fittings (Reconfirmed 2016)
AS 3972-1997 Portland and blended cements
AS 1684.4-1999 Residential timber-framed construction, - Simplified - Non-cyclonic areas (SEE IMPORTANT NOTE)
AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements
AS 4032.2-2002 Water supply - Valves for the control of hot water supply temperatures - Tempering valves and end of line temperature actuated devices
AS 2758.1-1998 Aggregates and rock for engineering purposes - Concrete aggregates
AS 1646.1-2000 Elastomeric seals for waterworks purposes - General requirements
AS 3688-2005 Water supply - Metallic fittings and end connectors
AS 4032.1-2002 Water supply - Valves for the control of hot water supply temperatures Thermostatic mixing valves - Materials design and performance requirements
AS 1397-2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated

AS 4553-2008 Gas space heating appliances
AS/NZS 2982:2010 Laboratory design and construction
ATS 5200.051-2005 Technical Specification for plumbing and drainage products Bidet douche seats
ATS 5200.042-2004 Technical Specification for plumbing and drainage products - Roll-grooved jointing systems
AS/NZS 2845.1:2010 Water supply - Backflow prevention devices Materials, design and performance requirements
AS 5200.037.2-2008 Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016)
ATS 5200.490-2007 Technical Specification for plumbing and drainage products Cross-linked polyethylene/ aluminium/polyethylene-composite pipe systems for pressure applications (Reconfirmed 2018)
AS 4125.1-2009 Sound laboratory practice in food and water microbiology laboratories - Premises, safety, sample management, regulatory compliance and record management
ATS 5200.050-2005 Technical Specification for plumbing and drainage products Prefabricated bathroom modules
AS/NZS 3666.2:2011 Air-handling and water systems of buildings - Microbial control Operation and maintenance
AS 5830.1-2012 In-line ball valves for use in plumbing water supply systems Metal-bodied
AS/NZS 4692.1:2005 Electric water heaters Energy consumption, performance and general requirements (Reconfirmed 2016)
AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
AS/NZS 3500.2:2003 Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 3500.2:2003 Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 4765:2007 Modified PVC (PVC-M) pipes for pressure applications
ATS 5200.476-2006 Technical Specification for plumbing and drainage products Heated water systems - Leak protection device
AS 1357.2-2005 Valves primarily for use in heated water systems Control valves (Reconfirmed 2015)
HB 230-2008 Rainwater Tank Design and Installation Handbook
ATS 5200.478-2006 Technical Specification for plumbing and drainage products Cross-linked polyethylene/Aluminium/Cross-linked polyethylene macro-composite pipe systems for pressure applications
ATS 5200.037.2-2005 Technical Specification for plumbing and drainage products Flow controllers - For use in heated or cold water plumbing systems
AS 2658-2008 LP Gas - Portable and mobile appliances
ATS 5200.420-2005 Technical Specification for plumbing and drainage products Trap-priming valves
ATS 5200.489-2009 Technical Specification for plumbing and drainage products Stainless steel flexible assemblies for plumbing applications
AS/NZS 2712:2007 Solar and heat pump water heaters - Design and construction (Reconfirmed 2020)
AS 4176.2-2010 Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) (Reconfirmed 2022)
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
HB 326-2008 Urban Greywater Installation Handbook for Single Households
AS 1361-1995 Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016)
ATS 5200.030-2012 Technical Specification for plumbing and drainage products Solenoid valves
HB 230-2006 Rainwater Tank Design and Installation Handbook
ATS 5200.472-2006 Technical Specification for plumbing and drainage products Heated water system recirculation device
ATS 5200.473-2007 Stainless steel/nano-antibiotic PP-R pipe systems for water supply applications
AS/NZS 2243.3:2010 Safety in laboratories Microbiological safety and containment
AS 1056.1-1991 Storage water heaters General requirements
AS 3533.1-2009 Amusement rides and devices Design and construction
ATS 5200.053-2006 Technical Specification for plumbing and drainage products Stainless steel pipes and tubes
SAA/SNZ HB32:1995 Control of microbial growth in air-handling and water systems in buildings (Reconfirmed 2016)
AS 1428.1-2001 Design for access and mobility General requirements for access - New building work
ATS 5200.491-2010 Technical Specification for plumbing and drainage products Aluminium alloy piping system with plastics lining for plumbing water service applications
AS 1210-1997 Pressure vessels
ATS 5200.475-2006 Technical Specification for plumbing and drainage products Heated Water Systems - Cold water recovery device
ATS 5200.481-2006 Technical Specification for plumbing and drainage products Thermal switching valves
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS/NZS 3500.1:2003 Plumbing and drainage Water services
AS 3498-2009 Authorization requirements for plumbing products - Water heaters and hot-water storage tanks
AS/NZS 3666.1:2011 Air-handling and water systems of buildings - Microbial control Design, installation and commissioning
ATS 5200.479-2006 Flood stop safety valve
AS 3688-2005 Water supply - Metallic fittings and end connectors
ATS 5200.030-2007 Technical Specification for plumbing and drainage products Solenoid valves
AS 5830.2-2012 In-line ball valves for use in plumbing water supply systems Plastics-bodied
AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage
ATS 5200.485-2006 Pressure compensating tank
AS 4226-2008 Guidelines for safe housing design

View more information
US$82.57
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
Hardcopy with incorporated amendment - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

or

Get in touch with us