AS/NZS 3678:1996

AvailableSuperseded

AvailableSuperseded An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by SAI Global as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Preview

Structural steel - Hot-rolled plates, floorplates and slabs

Publisher: Standards Australia

Published:

Abstract - (Show below) - (Hide below)

Specifies requirements for the production and supply of hot-rolled structural steel plates, floorplates and slabs for general structural and engineering applications. It also specifies requirements for the production and supply of wide slabs as fully killed analysis-only steel.

Scope - (Show below) - (Hide below)

This Standard specifies requirements for the production and supply of hot-rolled structural steel plates and floorplates for carbon and carbon-manganese mechanically-tested steels, fully-killed analysis-only steels, and low-alloy (weathering) mechanically-tested steels. This Standard also specifies requirements for the production and supply of wide slabs as fully-killed analysis-only steel.For general structural and engineering applications, all grades specified in this Standard are suitable for -(a) welding in accordance with AS/NZS 1554; or(b) riveting and bolting as specified in AS 1538, AS 3990, AS 4100 and NZS 3404.This Standard does not cover the following:(i) Structural steel - hot-rolled bars and sections (see AS/NZS 3679.1), and welded I sections (see AS/NZS 3679.2).(ii) Steel plates for pressure equipment (see AS 1548).(iii) Structural steel hollow sections (see AS 1163).(iv) Hot-rolled steel flat products (see AS 1594).(v) Structural and pressure vessel steel - Quenched and tempered plate (see AS 3597)NOTES:1 Guidelines to purchasers on requirements that should be specified by the purchaser and those that should or may be agreed on at the time of enquiry and ordering are given in Appendix A.2 Guidelines to various means for demonstrating compliance with this Standard are given in Appendix B.3 Guidelines on cold-bending and hot-forming of plate during fabrication are given in Appendix C.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	AvailableSuperseded
Publisher	Standards Australia
Pages
ISBN
Committee	BD-023
Under Revision	DR 07233
Supersedes	DR 94332 AS 3678-1990
Superseded By	AS/NZS 3678:2011

History - (Show below) - (Hide below)

Amendment 1 to AS/NZS 3678:1996 see DR 99211 CP First published in Australia in part as AS A1-1925.
Second edition 1928.
AS A1-1928 redated AS A1-1931.
AS A1-1931 revised and redesignated in part as AS A33-1937.
AS A33-1937 redated AS A33-1955.
AS A135 first published 1965.
AS A147 first published 1965.
AS A149 first published 1965.
AS A151 first published 1966.
AS A33-1955 revised and redesignated in part as AS A157-1966.
AS A135-1965, AS A149-1965 and AS A151-1966 revised, amalgamated and redesignated AS A186-1971.
Second edition AS A147-1971.
AS A187 first published 1971.
AS A186-1971 revised and redesignated AS 1204-1972.
AS A187-1971 revised and redesignated AS 1205-1972.
AS A157-1966 revised and redesignated AS 1405-1973.
AS A147-1971 revised and redesignated AS 1227-1974.
Second edition AS 1205-1980.
Second edition AS 1227-1980.
AS 1204-1972 and AS 1405-1973 revised, amalgamated and redesignated as AS 1204-1980.
AS 1204-1980, AS 1205-1980 and AS 1227-1980 revised, amalgamated and redesignated in part as AS 3678-1990.
AS 1204-1980 withdrawn March 1990.
AS 1205-1980 withdrawn March 1990.
AS 1227-1980 withdrawn March 1990.
AS 3678-1990 jointly revised and designated AS/NZS 3678:1996.

Standards Referenced By This Book - (Show below) - (Hide below)

AS 1365-1986	Tolerances for flat-rolled steel products
AS 1710-2007 (R2017)	Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate and universal sections - Test methods and quality classification
AS 3990-1993 (R2016)	Mechanical equipment - Steelwork
AS 2706-2003 (R2018)	Numerical values - Rounding and interpretation of limiting values
AS 3597-1993	Structural and pressure vessel steel - Quenched and tempered plate
AS 1594-1989	Hot-rolled steel flat products
AS K1.16-1961	Methods for the sampling and analysis of iron and steel Determination of sulphur in steel (gravimetric method)
AS 2706-1984	Numerical values - Rounding and interpretation of limiting values
AS/NZS 1365:1996 (R2016)	Tolerances for flat-rolled steel products
AS 1399-1990	Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS K1.21-1965	Methods for the sampling and analysis of iron and steel Cobalt in iron and steel (photometric method)
AS/NZS ISO 9004.1:1994	Quality management and quality system elements Guidelines
AS/NZS 1554.1:2004	Structural steel welding Welding of steel structures
AS 1199-1988	Sampling procedures and tables for inspection by attributes
AS/NZS 3679.1:1996	Structural steel Hot-rolled bars and sections
AS/NZS 1594:2002 (R2016)	Hot-rolled steel flat products
AS/NZS 1554.1:1995	Structural steel welding Welding of steel structures
AS 1554.2-1993	Structural steel welding Stud welding (steel studs to steel)
AS/NZS ISO 9000.1:1994	Quality management and quality assurance Standards Guidelines for selection and use
AS 1538-1988	Cold-formed Steel Structures Code
AS/NZS 1554.2:2003	Structural steel welding Stud welding (steel studs to steel)
AS 1213-1982	Iron and steel - Methods of sampling
AS 1163-1991	Structural steel hollow sections
AS 4100-1990	Steel structures
AS 1548-1995	Steel plates for pressure equipment
AS 1391-1991	Methods for tensile testing of metals
AS 1050.12-1983 (R2016)	Methods for the analysis of iron and steel Determination of nitrogen in steel (steam distillation titrimetric method)
AS 1544.2-2003 (R2017)	Methods for impact tests on metals Charpy V-notch
AS 1710-1986	Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate - Test methods and quality classification
AS 1544.2-1989	Methods for impact tests on metals Charpy V-notch
HB 18.28-2005	Conformity assessment - Guidance on a third-party certification system for products
AS 4100-1998 (R2016)	Steel structures
AS/NZS 1553.1:1995	Covered electrodes for welding Low carbon steel electrodes for manual metal-arc welding of carbon steels and carbon-manganese steels
AS/NZS 3679.2:1996	Structural steel Welded I sections
AS 1391-2007 (R2017)	Metallic materials - Tensile testing at ambient temperature

Standards Referencing This Book - (Show below) - (Hide below)

AS 1735.2-1997	Lifts, escalators and moving walks Passenger and goods lifts - Electric
AS/NZS 3845:1999	Road safety barrier systems
AS 1138-2008 (R2019)	Thimbles for wire rope
AS 2327.1-2003	Composite structures Simply supported beams
AS 6401-2003 (R2015)	Knife gate valves for waterworks purposes
AS/NZS 4600:1996	Cold-formed steel structures
AS 4087-2004	Metallic flanges for waterworks purposes
AS 1858.1-2003	Electrodes and fluxes for submerged-arc welding Carbon steels and carbon-manganese steels
AS EN 12079.1-2010	Offshore containers and associated lifting sets Offshore containers - Design, manufacture and marking (EN 12079-1:2006, MOD)
AS 2359.12-1996	Powered industrial trucks Hazardous areas
AS 4290-2000	Design and installation of revolving doors
AS 4794-2001 (R2015)	Non-return valves - Swing check and tilting disc
AS 3996-2006	Access covers and grates
AS/NZS 1100.501:2002 (R2014)	Technical drawing Structural engineering drawing
AS 1735.9-1994	Lifts, escalators and moving walks Special purpose industrial lifts
AS/NZS 1554.1:2004	Structural steel welding Welding of steel structures
AS 4795-2002	Double-flanged butterfly valves for waterworks purposes
AS 6001-1999	Working platforms for housing construction
AS/NZS 1554.1:2000	Structural steel welding Welding of steel structures
AS/NZS 4994.1(Int):2004	Temporary roof edge protection for housing and residential buildings General requirements
AS/NZS 1559:1997	Hot-dip galvanized steel bolts with associated nuts and washers for tower construction
AS 3585-2008 (R2019)	End fittings for synthetic flat-webbing and round slings
AS 3983-1991 (R2016)	Metal drums for insulated electric cables and bare conductors
AS 5007-2007 (R2018)	Powered doors for pedestrian access and egress
AS/NZS 1594:1997	Hot-rolled steel flat products
AS 2129-2000 (R2016)	Flanges for pipes, valves and fittings
AS 2809.2-1999	Road tank vehicles for dangerous goods Tankers for flammable liquids
AS/NZS 3679.1:1996	Structural steel Hot-rolled bars and sections
AS 1228-2006	Pressure equipment - Boilers
AS 2809.5-2001	Road tank vehicles for dangerous goods Tankers for bitumen-based products
AS/NZS 1576.2:2009	Scaffolding Couplers and accessories
AS 2980-2004	Qualification of welders for fusion welding of steels
AS/NZS 2576:2005	Welding consumables for build-up and wear resistance
AS/NZS 1553.2:1999	Covered electrodes for welding Low and intermediate alloy steel electrodes for manual metal-arc welding of carbon steels and low and intermediate alloy steels
AS 1576.2-1991	Scaffolding Couplers and accessories
AS 4085-1992	Automatic sliding door assemblies
AS/NZS 1554.7:2006	Structural steel welding Welding of sheet steel structures
AS/NZS 1553.1:1995	Covered electrodes for welding Low carbon steel electrodes for manual metal-arc welding of carbon steels and carbon-manganese steels
AS 2809.4-2001	Road tank vehicles for dangerous goods Tankers for toxic and corrosive cargoes
AS/NZS 3679.2:2010	Structural steel Welded I sections
AS 1735.2-2001	Lifts, escalators and moving walks Passenger and goods lifts - Electric
AS/NZS 3785.4:2002	Underground mining - Shaft equipment Conveyances for vertical shafts
AS 2809.2-2008	Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids
AS/NZS 4496:1997 (R2016)	Recommended practice for the colour coding of steel products
AS 3751-2005	Underground mining - Slope haulage - Couplings, drawbars, and safety chains
AS/NZS 1554.5:2004	Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1579-2001 (R2018)	Arc-welded steel pipes and fittings for water and waste-water
AS/NZS 4677:2010	Steel utility services poles
AS/NZS 4600:2005	Cold-formed steel structures
AS/NZS 2980:2007	Qualification of welders for fusion welding of steels
AS 1228-1997	Pressure equipment - Boilers
AS 1085.17-2003 (R2013)	Railway track material Steel sleepers
AS 5100.6-2004	Bridge design Steel and composite construction
AS/NZS 3679.2:1996	Structural steel Welded I sections
AS 2159-1995	Piling - Design and installation
AS 1576.4-1991	Scaffolding Suspended scaffolding
AS 1154.1-2004	Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions
AS 4425-1996	Above ground burial structures
AS/NZS 1576.3:1995	Scaffolding Prefabricated and tube-and-coupler scaffolding
AS 2159-2009	Piling - Design and installation
AS/NZS 2717.1:1996	Welding - Electrodes - Gas metal arc Ferritic steel electrodes
AS/NZS 4677:2000	Steel utility services poles
AS/NZS 4994.1:2009	Temporary edge protection General requirements
AS 3637.1-2005 (R2017)	Underground mining - Winding suspension equipment General requirements
AS/NZS 1594:2002 (R2016)	Hot-rolled steel flat products
AS/NZS 2312:2002	Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 4041-2006 (R2016)	Pressure piping
AS 4100-1998 (R2016)	Steel structures
AS 1418.1-2002	Cranes, hoists and winches General requirements
AS 1210-2010	Pressure vessels
AS 2203.1-1990	Cored electrodes for arc-welding Ferritic steel electrodes
AS 1577-1993	Scaffold planks
AS 4795-2006	Butterfly valves for waterworks purposes
AS 1228-2006	Pressure equipment - Boilers
AS 1138-1992	Thimbles for wire rope
AS 1418.14-1996	Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions
AS 1154.1-2009 (R2019)	Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions
AS 1210-1997	Pressure vessels
AS 2089-1993	Sheave blocks for lifting purposes
AS/NZS 1554.2:2003	Structural steel welding Stud welding (steel studs to steel)
AS/NZS 1576.5:1995	Scaffolding Prefabricated splitheads and trestles

Add To Cart

Product Format

Quantity

add to cart

AS/NZS 3678:1996

Abstract - (Show below) - (Hide below)

Scope - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

History - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?