• There are no items in your cart

AS/NZS 3718:2005

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Water supply - Tap ware (Reconfirmed 2016)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

04-12-2023

Published date

06-01-2005

Preview

Specifies requirements for metallic taps, plastic taps, mixing taps, sensor taps, lever taps, timed flow taps, mixing taps mechanical (non-thermostatic), and tapsets in a range of nominal sizes from DN 6 to DN 50, generally for continuous operating temperatures not exceeding 80 degrees Celsius. Products designed for other temperature ranges are included where tested to the appropriate temperature criteria.

This Standard specifies requirements for metallic taps, plastic taps, mixing taps, sensor taps, lever taps, timed flow taps, mixing taps mechanical (non-thermostatic), and tapsets in a range of nominal sizes from DN6 to DN50, generally for continuous operating temperatures not exceeding 80°C. Products designed for other temperature ranges are included where tested to the appropriate temperature criteria.The Standard also specifies requirements for outlets of a tap or mixing tap and the requirements for tapset breaching piece assemblies.Means for demonstrating compliance with this Standard are given in AppendixA.Certification under the Plumbing Code of Australia is mandatory in Australia but not in New Zealand.

Committee
WS-001
DocumentType
Standard
ISBN
0 7337 6738 9
Pages
71
ProductNote
Reconfirmed 23/12/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 23/12/2016
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

Revised and redesignated as AS B35-1931.Revised and redesignated as AS 1718-1975.AS 1718-1975 revised and redesignated in part as AS 1718-1988 and AS 3718-1988.MP 52 first published 1988.Second edition AS 3718-1990.Second edition MP 52-1990.MP 52-1990 revised in part and issued as third edition 1991.Third edition AS 3718-1992.Third edition AS 1718-1992.Fourth edition MP 52-1993.AS 3496 first published 1995.AS 3718 jointly revised and designated as AS/NZS 3718:1997.Fifth edition MP 52-1997.Second edition AS 3496-1999.Sixth edition MP 52-2001.AS 1718-1992, AS 3496-1999, AS/NZS 3718:1997 and part of MP 52-2001 jointly revised, amalgamated and redesignated as AS/NZS 3718:2003.Second edition AS/NZS3718:2005.Reconfirmed 2016. Originated in part as part of AS B1-1928T and MP 52-2001. Previous editions AS 1718-1992, AS 3496-1999, AS/NZS 3718:1997 and MP 52-2001. AS 1718-1992, AS 3496-1999, AS/NZS 3718:1997 and part of MP 52-2001 jointly revised, amalgamated and redesignated as AS/NZS 3718:2003. Second edition AS/NZS 3718:2005. Reissued incorporating Amendment No. 1 (May 2006). Reissued incorporating Amendment No. 2 (December 2008).

AS 2136-1977 Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018)
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS 1881-1986 ZINC ALLOYS - CASTING INGOTS AND CASTINGS - QUALITY REQUIREMENTS (Reconfirmed 2018)
AS 3558.5-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of degradation by ultraviolet light (Reconfirmed 2016)
AS 2738-2000 Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018)
AS 1769-1975 Welded stainless steel tubes for plumbing applications (Reconfirmed 2018)
AS/NZS 6400:2005 Water efficient products - Rating and labelling
HB 18.28-1991 Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products
AS/NZS 3499:2006 Water supply - Flexible hose assemblies (Reconfirmed 2016)
AS/NZS 1568:1998 Copper and copper alloys - Forging stock and forgings
AS 3688-2005 Water supply - Metallic fittings and end connectors
AS 2345-1992 Dezincification resistance of copper alloys
AS/NZS 2845.1:1998 Water supply - Backflow prevention devices Materials, design and performance requirements
AS 3501-1987 Parallel screw threads of whitworth form (BSW and BSF) and associated gauges and gauging practice (Reconfirmed 2017)
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS/NZS 4020:2002 Testing of products for use in contact with drinking water
AS 1572-1998 Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018)
AS 1349-1986 Bourdon tube pressure and vacuum gauges (Reconfirmed 2018)
AS 1432-2004 Copper tubes for plumbing, gasfitting and drainage applications
AS 2831-1985 Thermometers - Solid stem - Long and short - For precision use
AS 1722.1-1975 Pipe threads of Whitworth form Sealing pipe threads (metric units)
AS 2345-2006 Dezincification resistance of copper alloys
AS/NZS 3662:2005 Performance of showers for bathing
AS/NZS 1567:1997 Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021)
AS 1722.2-1992 Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017)
AS 3635-1990 Unified (ISO inch) screw threads, associated gauges, and gauging practice (Reconfirmed 2017)
AS 1167.1-1993 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS/NZS 1167.1:2005 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS 1565-1996 Copper and copper alloys - Ingots and castings (Reconfirmed 2020)
AS 3688-1994 Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors
AS 1834.1-1991 Material for soldering Solder alloys (Reconfirmed 2018)
AS 2837-1986 Wrought alloy steels - Stainless steel bars and semi-finished products
AS/NZS 3500.4.2:1997 National Plumbing and Drainage Hot water supply systems - Acceptable solutions
AS/NZS 3499:1997 Flexible tube connectors for water supply

AS 5200.000-2006 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018)
AS/NZS 2845.1:2010 Water supply - Backflow prevention devices Materials, design and performance requirements
AS 5200.037.2-2008 Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016)
AS/NZS 3500.1:2018 Plumbing and drainage Water Services
AS 1172.2:2014 Sanitary plumbing products Flushing devices and cistern inlet and outlet valves
AS/NZS 1730:1996 Washbasins
AS 2419.2-1994 Fire hydrant installations - Fire hydrant valves
AS 2419.2-1994 Fire hydrant installations - Fire hydrant valves
MP 52-2005 Manual of authorization procedures for plumbing and drainage products
AS/NZS 2023:1995 Baths for ablutionary purposes
ATS 5200.420-2005 Technical Specification for plumbing and drainage products Trap-priming valves
ATS 5200.477-2006 Technical Specification for plumbing and drainage products Rainwater/mains supply changeover devices
ATS 5200.489-2009 Technical Specification for plumbing and drainage products Stainless steel flexible assemblies for plumbing applications
ATS 5200.037.1-2006
ATS 5200.030-2012 Technical Specification for plumbing and drainage products Solenoid valves
AS/NZS 6400:2016 Water efficient products - Rating and labelling
AS/NZS 2845.1:1998 Water supply - Backflow prevention devices Materials, design and performance requirements
AS 5200.007-2008 Plumbing and drainage products Metal-bodied water hammer arresters
AS/NZS 3500.1:2003 Plumbing and drainage Water services
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
ATS 5200.030-2007 Technical Specification for plumbing and drainage products Solenoid valves
AS 5830.2-2012 In-line ball valves for use in plumbing water supply systems Plastics-bodied

View more information
US$94.65
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.