• There are no items in your cart

AS/NZS 3750.1:2008

Current
Current

The latest, up-to-date edition.

Paints for steel structures Epoxy mastic (two-pack) - For rusted steel (Reconfirmed 2020)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

05-19-2008

Preview

Specifies requirements for a two-component, high-build, high-solids, epoxy mastic for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment.

This Standard specifies requirements for a two-component, high-build, high-solids, epoxy mastic for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment. It is intended primarily for use on imperfectly prepared surfaces, i.e., surfaces where residual rust and some previously applied paint of any type are still present. These coatings are also suitable for applications over blast cleaned surfaces where extended service life may be achieved.Paint specified in this Standard is described in AS/NZS 2312 as Paint Reference C32. Commonly known as surface tolerant epoxy, this product may be pigmented with aluminium or micaceous iron oxide. It may also be produced in a limited range of colours and is designed primarily for use as a single coat, high-build, self priming finish.NOTES;1 This paint may be used as detailed for systems EPMI and EPM2 in AS/NZS 2312.2 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of epoxy paints is contained in Appendix B.

Committee
CH-003
DocumentType
Standard
ISBN
0 7337 8659 6
Pages
24
ProductNote
Reconfirmed 11/09/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 11/09/2020
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS 3750-1994.
Revised and redesignated AS/NZS 3750.1:2008.
Reconfirmed 2020. Originated as AS 3750.1-1994. Revised and redesignated AS/NZS 3750.1:2008.

AS/NZS 1580.602.2:1995 Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013)
AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS/NZS 1580.211.1:1995 Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013)
AS 1580.108.2-2004 Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge (Reconfirmed 2019)
AS/NZS 1580.403.1:1999 Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013)
AS 1627.2-2002 Metal finishing - Preparation and pretreatment of surfaces Power tool cleaning (Reconfirmed 2017)
AS/NZS 1580.457.1:1996 Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013)
AS 1627.9-2002 Metal finishing - Preparation and pretreatment of surfaces Pictorial surface preparation standards for painting steel surfaces (Reconfirmed 2017)
AS/NZS 1580.601.1:1995 Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013)
AS 2700-1996 Colour Standards for general purposes - Swatches
AS 1580.301.2-1990 Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013)
AS 1580.105.2-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS/NZS 1580.481.1.9:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013)
AS/NZS 1580.108.1:1994 Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013)
AS 1580.408.2-2004 Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019)
AS 1580.402.1-2003 Paints and related materials - Methods of test Bend test
AS/NZS 1580.101.5:1999 Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013)
AS 2854-2004 Tinplate cans for general use
AS/NZS 1580.101.1:1999 Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013)
AS/NZS 1580.481.1.6:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013)
AS 2905-2005 Steel drums
AS 1580.603.1-2002 Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013)
AS 3530-1988 Solvents - Mineral turpentine and white spirit
AS 1580.452.2-2002 Paints and related materials - Methods of test Resistance to corrosion - Salt droplet test
AS 1580.481.3-2002 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013)
AS/NZS 2310:2002 Glossary of paint and painting terms (Reconfirmed 2016)
AS/NZS 1580.211.2:1995 Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013)
AS 1580.105.1-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning
AS 1517-1991 Tinplate and blackplate
AS/NZS 1580.481.1.8:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013)
AS/NZS 1580.104.1:2000 Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013)
AS/NZS 1580.481.1.10:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013)
AS/NZS 1580.205.2:1997 Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013)
AS/NZS 1580.205.4:1998 Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013)
AS/NZS 1580.404.1:1997 Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013)
AS 1580.454.1-2002 Paints and related materials - Methods of test Resistance to mineral oil and other organic liquids

AS/NZS 5131:2016 Structural steelwork - Fabrication and erection

View more information
US$69.34
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.