• There are no items in your cart

AS/NZS 3750.10:1994

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Paints for steel structures Full gloss epoxy (two-pack)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

08-10-2023

Language(s)

English

Published date

03-05-1995

Preview

1 - AS/NZS 3750.10:1994 PAINTS FOR STEEL STRUCTURES - FULL GLOSS EPOXY (TWO-PACK)
4 - PREFACE
5 - CONTENTS
6 - SECTION 1 SCOPE AND GENERAL
6 - 1.1 SCOPE
6 - 1.2 REFERENCED DOCUMENTS
6 - 1.3 DEFINITIONS
6 - 1.3.1 Component
6 - 1.3.2 Full gloss epoxy paint
6 - 1.3.3 Pot-life
7 - 1.4 SAFETY PRECAUTIONS
8 - SECTION 2 MATERIAL REQUIREMENTS
8 - 2.1 GENERAL
8 - 2.2 CONDITIONS OF TEST
8 - 2.3 LIQUID PAINT
8 - 2.3.1 Condition in container
8 - 2.3.2 Fineness of grind
8 - 2.3.3 Volume solids
8 - 2.3.4 Storage properties
8 - 2.3.5 Consistency
8 - 2.4 APPLICATION PROPERTIES
8 - 2.4.1 General
8 - 2.4.2 Brushing
9 - 2.4.3 Rolling
9 - 2.4.4 Spraying
9 - 2.4.5 Pot-life assessment
9 - 2.5 APPLIED FILM
9 - 2.5.1 Surface-dry time
9 - 2.5.2 Hard-dry time
9 - 2.5.3 Curing properties
9 - 2.5.4 Recoating properties
9 - 2.5.5 Gloss
9 - 2.5.6 Colour
9 - 2.5.7 Finish
9 - 2.5.8 Flexibility and adhesion
10 - 2.5.9 Accelerated tests
10 - 2.5.10 Resistance to weathering
13 - SECTION 3 PACKAGING AND LABELLING
13 - 3.1 MIXING RATIO
13 - 3.2 PACKAGING
13 - 3.3 LABELLING
14 - APPENDIX A - PURCHASING GUIDELINES
14 - A1 GENERAL
14 - A2 INFORMATION TO BE SUPPLIED WITH THE ENQUIRY OR ORDER
15 - APPENDIX B - GUIDANCE ON THE USE AND APPLICATION OF A TWO-PACK FULL GLOSS EPOXY PAINT
15 - B1 SCOPE
15 - B2 MANUFACTURER’S TECHNICAL DATA
15 - B3 SAFETY PRECAUTIONS
15 - B4 TYPICAL USES
16 - B5 MIXING PROCEDURE
16 - B6 CURING CONDITIONS
16 - B7 POT-LIFE
16 - B8 TYPICAL FILM THICKNESS
16 - B9 RECOATING
16 - B10 STORAGE CONDITIONS
17 - APPENDIX C - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
17 - C1 SCOPE
17 - C2 STATISTICAL SAMPLING
17 - C3 PRODUCT CERTIFICATION
17 - C4 SUPPLIER’S QUALITY SYSTEM
18 - C5 OTHER MEANS OF ASSESSMENT
19 - APPENDIX D - REFERENCED DOCUMENTS
21 - APPENDIX E - PREPARATION OF TEST PANELS
21 - E1 SCOPE
21 - E2 TEST PANEL MATERIAL
21 - E2.1 Tinplate
21 - E2.2 Steel
21 - E3 PREPARATION
21 - E3.1 Tinplate
21 - E3.2 Steel
22 - APPENDIX F - DETERMINATION OF THE CURING PROPERTIES OF FULL GLOSS EPOXY PAINT
22 - F1 SCOPE
22 - F2 PRINCIPLE
22 - F3 REAGENT
22 - F4 APPARATUS
22 - F4.1 Cotton wool
22 - F4.2 Scratch-resistance equipment
22 - F4.3 Watch glass
22 - F5 TEST PANEL
22 - F6 PROCEDURE
22 - F7 TEST REPORT
23 - APPENDIX G - ASSESSMENT OF RESISTANCE OF A FULL GLOSS EPOXY PAINT TO WATER
23 - G1 SCOPE
23 - G2 PRINCIPLE
23 - G3 APPARATUS
23 - G3.1 Cotton wool
23 - G3.2 Beaker
23 - G3.3 Scratch-resistance equipment
23 - G3.4 Knife blade
23 - G3.5 Straightedge
23 - G3.6 Grey scale
23 - G3.7 Gloss determination equipment
23 - G4 PROCEDURE
24 - G5 TEST REPORT
25 - APPENDIX H - ASSESSMENT OF RESISTANCE OF A FULL GLOSS EPOXY PAINT TO MINERAL OIL
25 - H1 SCOPE
25 - H2 PRINCIPLE
25 - H3 REAGENTS
25 - H3.1 Mineral oil
25 - H3.2 Mineral turpentine
25 - H4 APPARATUS
25 - H4.1 Cotton wool
25 - H4.2 Beaker
25 - H4.3 Scratch-resistance equipment
25 - H4.4 Temperature control apparatus
25 - H4.5 Knife blade
25 - H4.6 Straightedge
25 - H4.7 Grey scale
25 - H4.8 Gloss determination equipment
25 - H5 PROCEDURE
26 - H6 TEST REPORT
27 - APPENDIX I - ASSESSMENT OF RESISTANCE OF A FULL GLOSS EPOXY PAINT TO ALKALI AND ACID
27 - I1 SCOPE
27 - I2 PRINCIPLE
27 - I3 REAGENTS
27 - I3.1 Sodium hydroxide solution (20%(m/V))
27 - I3.2 Sulfuric acid (rho20 1260 kg/m3)
27 - I4 APPARATUS
27 - I4.1 Cotton wool
27 - I4.2 Beaker
27 - I4.3 Scratch-resistance equipment
27 - I4.4 Knife blade
27 - I4.5 Straightedge
27 - I5 PROCEDURE
28 - I6 TEST REPORT
29 - APPENDIX J - PROCEDURE FOR TESTING THE RESISTANCE OF A FULL GLOSS EPOXY PAINT TO WEATHERING
29 - J1 SCOPE
29 - J2 PRINCIPLE
29 - J3 APPARATUS
29 - J3.1 Exposure rack
29 - J3.2 Microscope or magnifying device
29 - J3.3 Reference standards
29 - J4 PROCEDURE
29 - J5 REPORT

Provides requirements for full gloss epoxy paint intended for the protection of iron and steel structures against exterior corrosion in a severe industrial or marine environment.

This Standard specifies requirements for a two-component, full gloss epoxy paint for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment. It is suitable for application by conventional air or airless spraying and may also be applied by roller or brush. Paint specified in this Standard is described in AS 2312 as Paint Reference 24.This paint is intended for use as a topcoat in paint systems for the protection of iron and steel against corrosion involving wet and damp areas, high humidity, coastal/marine and industrial fallout.NOTES:1 This paint may be used as detailed for systems MP5-A, MP5-E, MP5-I and MP6-A in AS 2312.2 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of epoxy paints is contained in Appendix B.4 Alternative methods for determining compliance with this Standard are contained in Appendix C.5 The paint is available in a range of colours.6 Full gloss epoxy paints should not be used as a finish coat in exterior applications where retention of colour and gloss is required for long periods of time.

Committee
CH-003
DocumentType
Standard
ISBN
0 7262 9378 4
Pages
24
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published as AS 2603-1983.Revised and redesignated as Joint Standard AS/NZS 3750.10:1994. First published as AS 2603-1983. Revised and redesignated as Joint Standard AS/NZS 3750.10:1994.

AS/NZS 1580.214.1:1997 Paints and related materials - Methods of test Consistency - Stormer viscometer (Reconfirmed 2013)
AS/NZS 1580.403.1:1999 Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013)
AS 2905-1986 Steel drums
AS 1580.105.2-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS 2854-2004 Tinplate cans for general use
AS/NZS 1580.205.3:1997 Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013)
AS 1580.105.1-1992 Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning
AS/NZS 1580.101.1:1999 Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013)
AS 1580.104.1-1992 Paints and related materials - Methods of test Recommended materials for test panels
AS 1580.601.1-1975 Paints and related materials - Methods of test Colour - Visual comparison
AS 2674-1983 Paints for steel structures - Epoxy primer (two-pack)
AS 3900.1-1987 Quality management and quality assurance Standards Guidelines for selection and use
AS 1580.204.1-1990 Paints and related materials - Methods of test Fineness of grind
AS/NZS 1580.103.1:1995 Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013)
AS/NZS 1580.481.1.6:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013)
AS/NZS 1580.211.2:1995 Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013)
AS 1627.4-1989 Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning
AS 1580.602.2-1974 Paints and related materials - Methods of test Specular gloss
AS/NZS 1580.601.1:1995 Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013)
AS 1580.205.3-1981 Paints and related materials - Methods of test Application properties - Roller coating
AS 1580.402.1-1992 Paints and related materials - Methods of test Bend test
AS/NZS 1580.481.1.9:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013)
AS 2508.3.016-1982 Safe storage and handling information card - Methyl isobutyl ketone (MIBK)
AS 2905-2005 Steel drums
AS 1580.403.1-1981 Paints and related materials - Methods of test Scratch resistance
AS 1580.481.3-2002 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013)
AS 1580.103.1-1980 Paints and related materials - Methods of test Preliminary examination and preparation for testing
AS/NZS 1580.481.1.8:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013)
AS 1580.603.1-1992 Paints and related materials - Methods of test Finish
AS/NZS 1580.104.1:2000 Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013)
AS 1580.101.5-1986 Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled
AS/NZS 1580.481.1.10:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013)
AS/NZS 1580.205.2:1997 Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013)
AS/NZS 1580.204.1:1998 Paints and related materials - Methods of test Fineness of grind (Reconfirmed 2013)
AS 1580.401.5-2002 Paints and related materials - Methods of test Hard dry condition - Sanding test
AS 1580.401.5-1993 Paints and related materials - Methods of test Hard dry condition - Sanding test
AS 1580.301.2-1990 Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013)
AS 1580.481.1.6-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion
AS 1580.457.1-1988 Paints and related materials - Methods of test Resistance to natural weathering
AS/NZS 1580.108.1:1994 Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013)
AS 1580.402.1-2003 Paints and related materials - Methods of test Bend test
AS/NZS 1580.101.5:1999 Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013)
AS 1580.481.1.8-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking
AS 2310-1980 Glossary of paint and painting terms
AS 1580.108.2-1993 Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge
AS 3904.1-1987 Quality management and quality system elements Guidelines
AS 1580.214.5-1990 Paints and related materials - Methods of test - Consistency - Rotational viscometer
AS 1580.408.2-2004 Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019)
AS 1580.108.1-1980 Paints and related materials - Methods of test Determination of dry film thickness on iron and steel substrates (permanent magnet instruments)
AS 1580.481.1.7-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking
AS 1580.603.1-2002 Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013)
AS 1580.408.2-1993 Paints and related materials - Methods of test Adhesion - Knife test
AS 2312-1984 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS 1580.454.1-2002 Paints and related materials - Methods of test Resistance to mineral oil and other organic liquids
AS 1580.214.1-1990 Paints and related materials - Methods of test - Consistency - Stormer viscometer
AS/NZS 1580.457.1:1996 Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013)
AS 2508.8.006-1992 Safe storage and handling information card - Sodium hydroxide (solid and solution) (caustic soda)
AS/NZS 1580.404.1:1997 Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013)
AS 1580.211.2-1980 Paints and related materials - Methods of test Ease of manual re-incorporation
AS/NZS 1580.481.1.7:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013)
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 2854-1986 Tinplate cans for general use
AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS/NZS 1580.401.1:1999 Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013)
AS 3530-1988 Solvents - Mineral turpentine and white spirit
AS 1580.454.1-1992 Paints and related materials - Methods of test Resistance to mineral oil
AS 1580.481.1.9-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering
AS 1580.101.1-1986 Paints and related materials - Methods of test Air drying conditions
HB 18.44-1991 Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products
AS 1580.481.3-1992 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates
AS/NZS 1580.602.2:1995 Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013)
AS 1580.205.4-1981 Paints and related materials - Methods of test Application properties - Airless spraying
AS 1580.404.1-1981 Paints and related materials - Methods of test Recoating properties
AS 1580.205.2-1981 Paints and related materials - Methods of test Application properties - Conventional air spraying
AS/NZS 1580.211.1:1995 Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013)
AS 1580.401.1-1981 Paints and related materials - Methods of test Surface dry condition
AS 1580.105.2-1993 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS/NZS 1580.214.5:1997 Paints and related materials - Methods of test Consistency - Rotational viscometer (Reconfirmed 2013)
AS/NZS 1580.205.1:1997 Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013)
AS/NZS 2310:2002 Glossary of paint and painting terms (Reconfirmed 2016)
AS 2508.8.010-1990 Safe storage and handling information cards for hazardous materials - Sulfuric acid (up to 98% m/m)
AS 1580.105.1-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning
AS 1580.108.2-2004 Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge (Reconfirmed 2019)
AS/NZS 1580.205.4:1998 Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013)
AS 1580.481.1.10-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling
AS 1580.205.1-1981 Paints and related materials - Methods of test Application properties - Brushing
AS 1580.211.1-1980 Paints and related materials - Methods of test Degree of settling

AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS/NZS 3750.14:1997 Paints for steel structures High-build epoxy (two-pack)
AS/NZS 2311:2000 Guide to the painting of buildings
AS/NZS 2311:2017 Guide to the Painting of Buildings

View more information
US$69.34
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.