• There are no items in your cart

AS/NZS 3750.6:2009

Current
Current

The latest, up-to-date edition.

Paints for steel structures Full gloss polyurethane (two-pack) (Reconfirmed 2020)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

04-20-2009

Preview

Specifies requirements for two-component, solvent-borne, full gloss polyurethane paints intended to be used primarily for the protection of iron and steel against exterior atmospheric corrosion.

This Standard specifies requirements for two-component, solvent-borne, full gloss polyurethane paints intended to be used primarily for the protection of structural steel against exterior atmospheric corrosion. A full gloss polyurethane consists essentially of a polyester, polyacrylate or other polyol base cured with an aliphatic isocyanate hardener and appropriate pigments and solvents.These paints are intended for use as an aesthetic topcoat for the protection of iron and steel against corrosion involving wet and damp areas, high humidity, coastal/marine and industrial fallout or as a wear and tear or stain or chemically resistant finish. Polyurethane paints are particularly suited to applications where it is desirable to retain colour and gloss in addition to providing corrosion resistance. For the purpose of this Standard polyurethane paints are divided into two types by intended end use:(a) Type 1: A general purpose industrial two-pack polyurethane coating. Typically used on plant and equipment and in structural applications where a higher level of aesthetic performance than conventional alkyd or epoxy finishes is required.(b) Type 2: An industrial two-pack polyurethane coating giving premium levels of aesthetic performance.Both types may be available as either low or high volume solids formulations. They are best applied by conventional air or airless spraying but may also be formulated specifically for brush and roller application.NOTES: 1 Appendix A contains recommendations and advice on information that should be provided by the purchaser at the time of enquiry or order.2 Additional information on the use and application of polyurethane paints is contained in Appendix B.

Committee
CH-003
DocumentType
Standard
ISBN
0 7337 9122 0
Pages
16
ProductNote
Reconfirmed 11/09/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 11/09/2020
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS 2602-1983.
Jointly revised and redesignated as Joint Standard AS/NZS 3750.6:1995.
Second edition 2009.
Reconfirmed 2020. Originated as AS 2602-1983. Previous edition AS/NZS 3750.6:1995. Second edition 2009.

AS 1580.402.1-2003 Paints and related materials - Methods of test Bend test
AS/NZS 1580.101.5:1999 Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013)
AS 2854-2004 Tinplate cans for general use
AS/NZS 1580.205.3:1997 Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013)
AS/NZS 1580.481.1.6:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013)
AS/NZS 1580.481.1.2:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Discolouration (including bronzing) (Reconfirmed 2013)
AS/NZS 1580.405.1:1996 Paints and related materials - Methods of test Determination of pencil hardness of paint film (Reconfirmed 2013)
AS 2905-2005 Steel drums
AS/NZS 1580.104.1:2000 Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013)
AS 1580.403.2-2006 Paints and related materials - Methods of test Abrasion resistance
AS/NZS 1580.481.1.10:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013)
AS/NZS 1580.205.2:1997 Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013)
AS 1580.401.5-2002 Paints and related materials - Methods of test Hard dry condition - Sanding test
AS/NZS 1580.403.1:1999 Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013)
AS 2700-1996 Colour Standards for general purposes - Swatches
AS 1580.105.2-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS/NZS 1580.205.4:1998 Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013)
AS/NZS 1580.481.1.9:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013)
AS/NZS 1580.205.1:1997 Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013)
AS 1580.481.3-2002 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013)
AS/NZS 1580.481.1.8:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013)
AS/NZS 1580.481.1.11:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of chalking (Reconfirmed 2013)
AS/NZS 2310:2002 Glossary of paint and painting terms (Reconfirmed 2016)
AS/NZS 1580.211.2:1995 Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013)
AS 1580.105.1-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning
AS/NZS 1580.602.2:1995 Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013)
AS/NZS 1580.211.1:1995 Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013)
AS 1580.603.1-2002 Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013)
AS/NZS 3750.13:1997 Paints for steel structures Epoxy primer (two-pack)
AS/NZS 1580.481.1.5:1999 Paints and related materials - Methods of test Coatings - Exposed to weathering - Change in gloss (Reconfirmed 2013)
AS/NZS 1580.401.1:1999 Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013)
AS/NZS 1580.481.1.7:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013)
AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS/NZS 1580.601.1:1995 Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013)
AS 1580.408.2-2004 Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019)
AS/NZS 1580.457.1:1996 Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013)
AS 1580.454.1-2002 Paints and related materials - Methods of test Resistance to mineral oil and other organic liquids
AS/NZS 1580.103.1:1995 Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013)

AS 2699.3:2020 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS/NZS 5131:2016 Structural steelwork - Fabrication and erection
AS/NZS 2311:2017 Guide to the Painting of Buildings
AS/NZS 2280:2012 Ductile iron pipes and fittings

View more information
US$60.92
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.