• There are no items in your cart

AS/NZS 3750.8:1994

Current
Current

The latest, up-to-date edition.

Paints for steel structures Vinyl paints - Primer, high-build and gloss (Reconfirmed 2013)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

12-05-1994

Preview

Provides requirements for vinyl paints used as primers, intermediate coats and finishing coats intended for the exterior protection of iron and steel against atmospheric corrosion.

This Standard sets out requirements for vinyl paints to be used as primers, intermediate coats and finishing coats and intended for the protection of steel against exterior atmospheric corrosion. Paints specified in this Standard are those described under Paint References 7, 16 and 23 in AS 2312.Normally applied by conventional air or airless spray, vinyl primers, vinyl high-build paints and gloss finishing paints are intended for protection of steel against corrosion in damp or wet areas, coastal/marine environments and areas of high humidity or industrial fallout.The vinyl primer is usually supplied as light grey or red oxide and is intended as a base coat for vinyl finishing coats for direct application to bare steel or as a tie coat over a zinc primer.The high-build vinyl paints are available in a range of colours including micaceous iron oxide (MIO) pigmentation and are intended for use as intermediate or finishing coats where extra protection is required.The vinyl gloss paints are primarily intended as finishing coats over vinyl primer or high-build vinyl. The vinyl high-build and gloss may also be used over other primers. Although available in a range of colours, early chalking and loss of gloss is characteristic but this has no significant effect on the protective properties of the coating.NOTES:1 These paints may be used for paint systems MP3-A, MP3-B, MP3-C, MP5-C, MP5-G, MP5-L, LP1-C, LP1-G, GZLP-H, MSZLP-E described in AS 2312.2 Appendix A provides recommendations on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of vinyl paints is given in Appendix B.4 Alternative methods for determining compliance with this Standard are contained in Appendix C.

Committee
CH/3
DocumentType
Standard
ISBN
0 7262 9356 3
Pages
18
ProductNote
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS 3886-1991.Jointly revised and redesignated as Joint Standard AS/NZS 3750.8:1994.Reconfirmed 2013. First published as AS 3886-1991. Jointly revised and redesignated as Joint Standard AS/NZS 3750.8:1994.

AS 1580.401.1-1981 Paints and related materials - Methods of test Surface dry condition
AS/NZS 2310:2002 Glossary of paint and painting terms (Reconfirmed 2016)
AS 1580.103.1-1980 Paints and related materials - Methods of test Preliminary examination and preparation for testing
AS/NZS 1580.481.1.8:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013)
AS 1580.603.1-1992 Paints and related materials - Methods of test Finish
AS 1580.101.5-1986 Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled
AS/NZS 1580.481.1.10:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013)
AS 1580.481.3-2002 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013)
AS 1580.481.1.8-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking
AS/NZS 1580.481.1.6:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013)
AS 1580.214.1-1990 Paints and related materials - Methods of test - Consistency - Stormer viscometer
AS 1580.108.2-2004 Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge (Reconfirmed 2019)
AS 3904.1-1987 Quality management and quality system elements Guidelines
AS/NZS 1580.403.1:1999 Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013)
AS/NZS 1580.205.2:1997 Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013)
AS 1580.402.1-2003 Paints and related materials - Methods of test Bend test
AS/NZS 1580.101.5:1999 Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013)
AS 2310-1980 Glossary of paint and painting terms
AS 1580.455.1-1982 Paints and related materials - Methods of test Resistance to water at room temperature
AS 1580.108.2-1993 Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge
AS/NZS 1580.481.1.2:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Discolouration (including bronzing) (Reconfirmed 2013)
AS 1580.481.1.2-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Discolouration (including bronzing)
AS 1580.481.3-1992 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates
AS 1580.205.4-1981 Paints and related materials - Methods of test Application properties - Airless spraying
AS 1580.301.2-1990 Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013)
AS 1580.457.1-1988 Paints and related materials - Methods of test Resistance to natural weathering
AS/NZS 1580.108.1:1994 Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013)
AS 1580.404.1-1981 Paints and related materials - Methods of test Recoating properties
AS/NZS 1580.211.2:1995 Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013)
HB 18.44-1991 Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products
AS/NZS 1580.601.1:1995 Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013)
AS/NZS 1580.404.1:1997 Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013)
AS 1580.105.2-1993 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS/NZS 1580.481.1.9:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013)
AS 1580.108.1-1980 Paints and related materials - Methods of test Determination of dry film thickness on iron and steel substrates (permanent magnet instruments)
AS 3900.1-1987 Quality management and quality assurance Standards Guidelines for selection and use
AS 1627.4-1989 Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning
AS 1580.211.2-1980 Paints and related materials - Methods of test Ease of manual re-incorporation
AS/NZS 1580.481.1.7:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013)
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS 1580.603.1-2002 Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013)
AS 1580.602.2-1974 Paints and related materials - Methods of test Specular gloss
AS/NZS 1580.104.1:2000 Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013)
AS 2905-1986 Steel drums
AS 1580.105.2-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS 2854-2004 Tinplate cans for general use
AS/NZS 1580.101.1:1999 Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013)
AS 1580.104.1-1992 Paints and related materials - Methods of test Recommended materials for test panels
AS 1580.601.1-1975 Paints and related materials - Methods of test Colour - Visual comparison
AS 2674-1983 Paints for steel structures - Epoxy primer (two-pack)
AS 2312-1984 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS/NZS 1580.455.1:1997 Paints and related materials - Methods of test Resistance to water at room temperature (Reconfirmed 2013)
AS 2855-2004 Paints and related materials - Micaceous iron oxide pigment (Reconfirmed 2016)
AS/NZS 1580.457.1:1996 Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013)
AS 1580.402.1-1992 Paints and related materials - Methods of test Bend test
AS 2854-1986 Tinplate cans for general use
AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS/NZS 1580.401.1:1999 Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013)
AS 1580.403.1-1981 Paints and related materials - Methods of test Scratch resistance
AS/NZS 1580.211.1:1995 Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013)
AS 1580.205.2-1981 Paints and related materials - Methods of test Application properties - Conventional air spraying
AS 1580.481.1.10-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling
AS 1580.101.1-1986 Paints and related materials - Methods of test Air drying conditions
AS/NZS 1580.481.1.5:1999 Paints and related materials - Methods of test Coatings - Exposed to weathering - Change in gloss (Reconfirmed 2013)
AS 2855-1986 Paints and related materials - Micaceous iron oxide pigment
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 1580.408.2-2004 Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019)
AS 1580.408.2-1993 Paints and related materials - Methods of test Adhesion - Knife test
AS/NZS 1580.214.1:1997 Paints and related materials - Methods of test Consistency - Stormer viscometer (Reconfirmed 2013)
AS 1580.481.1.6-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion
AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
AS/NZS 1580.602.2:1995 Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013)
AS 2905-2005 Steel drums
AS 1580.211.1-1980 Paints and related materials - Methods of test Degree of settling
AS 1580.481.1.9-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering
AS 1580.481.1.5-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Change in gloss
AS/NZS 1580.205.4:1998 Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013)
AS/NZS 1580.103.1:1995 Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013)
AS 1580.481.1.7-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking

AS/NZS 5131:2016 Structural steelwork - Fabrication and erection

View more information
US$60.92
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.