• There are no items in your cart

AS/NZS 3760:2000

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

In-service safety inspection and testing of electrical equipment
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

03-13-2023

Language(s)

English

Published date

02-28-2000

Preview

1 - AS/NZS 3760:2000 IN-SERVICE SAFETY INSPECTION AND TESTING OF ELECTRICAL EQUIPMENT
4 - PREFACE
5 - CONTENTS
6 - FOREWORD
8 - SECTION 1 SCOPE AND GENERAL
8 - 1.1 SCOPE
8 - 1.2 APPLICATION
8 - 1.3 REFERENCED DOCUMENTS
9 - 1.4 DEFINITIONS
9 - 1.4.1 Class I equipment (basic insulated, protectively earthed equipment)
9 - 1.4.2 Class II equipment (double insulated equipment)
9 - 1.4.3 Competent person
9 - 1.4.4 Cord extension set (extension lead)
10 - 1.4.5 Electric portable outlet device (EPOD) (power board)
10 - 1.4.6 Exposed metal
10 - 1.4.7 Fixed equipment
10 - 1.4.8 Flexible supply cord
10 - 1.4.9 Insulation
11 - 1.4.10 May
11 - 1.4.11 Residual current device (RCD)
11 - 1.4.12 Voltage
11 - 1.4.13 Shall
11 - 1.4.14 Should
12 - SECTION 2 INSPECTIONS AND TESTS
12 - 2.1 SCOPE OF SECTION
12 - 2.2 FREQUENCY OF INSPECTION AND TESTS
12 - 2.3 PERSONNEL
12 - 2.4 INSPECTION AND TESTING
12 - 2.4.1 General
12 - 2.4.2 Action resulting from inspection and testing
13 - 2.4.3 Inspection and testing
14 - 2.4.4 Insulation resistance test
14 - 2.4.5 Testing of portable isolation transformers
14 - 2.4.6 Test for operation of portable RCDs
15 - 2.5 DOCUMENTATION
17 - APPENDIX A - TEST OF EARTHING
17 - A1 GENERAL
17 - A2 INSTRUMENTATION
17 - A3 TEST CONDITIONS
19 - APPENDIX B - INSULATION RESISTANCE TESTING
19 - B1 GENERAL
19 - B2 INSTRUMENTATION
19 - B3 TEST CONDITIONS
19 - B3.1 Metal parts which are normally earthed
19 - B3.2 Metal parts which are not earthed
19 - B3.3 Conductors in flexible cords
22 - APPENDIX C - INSULATION RESISTANCE TESTING OF PORTABLE ISOLATION TRANSFORMERS
22 - C1 GENERAL
22 - C2 INSTRUMENTATION
22 - C3 TEST CONDITIONS
25 - APPENDIX D - TEST FOR OPERATION OF PORTABLE RESIDUAL CURRENT DEVICES (RCDs)
25 - D1 GENERAL
25 - D2 INSTRUMENTATION
25 - D3 TEST CONDITIONS
26 - APPENDIX E - ADVISORY AUTHORITIES

Specifies the procedures and criteria for the in-service safety inspection and testing of electrical equipment which is designed for connection by flexible cord. It also applies to cord extension sets, portable outlet devices, portable residual current devices and portable isolation transformers. Appendices include detailed test methods. It does not cover type approval tests for the design and construction of the equipment, nor does it include any procedural rules for the safe use of equipment.

This Standard specifies procedures for the safety inspection and testing of single and polyphase electrical equipment, (other than fixed equipment) which is in-service, or available for hire or resale, and which is designed for connection by a flexible power supply cord and plug to a low voltage supply. It applies also to cord extension sets, electrical portable outlet devices, portable residual current devices and portable isolation transformers.Equipment connected by fixed wiring and large, stationary equipment connected by a flexible cord which is not flexed during normal use or exposed to abuse or damage in a hostile environment e.g. window mounted air conditioners, is not normally considered to represent a hazard sufficient to warrant routine in-service electrical safety testing. Accordingly, the testing of such equipment is not required by this Standard, although other standards or statutory requirements may specify such testing.Specialized electronic equipment, e.g. portable computers, may sustain damage if not tested in accordance with manufacturers instructions. Accordingly, advice should be sought from the equipment manufacturer or agent before proceeding with in-service tests.

Committee
EL-036
DocumentType
Standard
ISBN
0 7337 3298 4
Pages
19
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes

Under Revision see DR 00900 CP First published as AS 3760-1990.Jointly revised and designated as AS/NZS 3760:1996.Third edition 2000. First published as AS 3760-1990. Jointly revised and designated as AS/NZS 3760:1996. Third edition 2000.

AS/NZS 3017:1996 Electrical installations - Testing guidelines
AS/NZS 4249:1994 Electrical safety practices - Film, video and television sites
AS/NZS 3175.2.1:1994 Approval and test specification - Residual current-operated circuit breakers without integral overcurrent protection for household and similar uses (RCCB’s) Functionally independent of line voltage
AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3100:1997 Approval and test specification - General requirements for electrical equipment
AS/NZS 3003:1999 Electrical installations - Patient treatment areas of hospitals and medical and dental practices
AS/NZS 3350.1:1994 Safety of household and similar electrical appliances General requirements
AS/NZS 3175.2.2:1994 Approval and test specification - Residual current-operated circuit breakers without integral overcurrent protection for household and similar uses (RCCB’s) Functionally dependent on line voltage
AS 3190-1994 Approval and test specification - Residual current devices (current-operated earth-leakage devices)
AS 3190-1990 Approval and test specification - Residual current devices (current-operated earth-leakage devices)
AS/NZS 3175.1:1994 Approval and test specification - Residual current-operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB’s) General rules
AS 1939-1990 Degrees of protection provided by enclosures for electrical equipment (IP Code)
AS/NZS 3012:1995 Electrical installations - Construction and demolition sites
AS 3002-1985 Electrical installations - Shows and carnivals
AS/NZS 3551:1996 Technical management programs for medical devices

AS/NZS 4836:2001 Safe working on low-voltage electrical installations
AS/NZS 4701:2000 Requirements for domestic electrical appliances and equipment for reconditioning or parts recycling (Reconfirmed 2016)

View more information
US$60.92
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.