• There are no items in your cart

AS/NZS 3992:1998

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Pressure equipment - Welding and brazing qualification
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-30-2017

Published date

01-01-1998

Preview

Specifies requirements for the qualification of welding and brazing procedures, welders and brazers, and requirements for production weld testing, other than non-destructive examination, when used in the construction of boilers, pressure vessels, piping and their components. Specific details are given for manual metal-arc welding, flux cored-arc welding, gas metal-arc welding, gas tungsten-arc welding, submerged-arc welding, electroslag, and oxy-acetylene welding. Details are also given for torch brazing, furnace brazing, induction brazing, resistance brazing and dip brazing. The welding and brazing of carbon, carbon-maganese, and low and high alloy steels; as well as copper, aluminium, nickel, titanium and alloys of these materials, are included.

This Standard specifies requirements for the qualification of welding and brazing procedures, welders and brazers, and requirements for production weld testing other than non-destructive examination, when used in the construction, alteration and repair of boilers, pressure vessels, pressure piping and their components as specified in AS/NZS 1200, AS 1210, AS 1228 and AS 4041. This Standard may apply to automotive LPG fuel vessels (covered by AS/NZS 3509), serially produced pressure vessels (covered by AS 2971) or welded gas cylinders (covered by AS 2030), when specified by these Standards. This Standard does not apply to pipelines in accordance with AS 2885 except where referenced. The Standard provides specific details for the following:(a) Manual metal-arc welding, flux cored arc welding, gas metal-arc welding, gas tungsten-arc welding, submerged arc welding, plasma transferred arc welding, electroslag welding and oxy-acetylene welding.(b) Torch brazing, furnace brazing, induction brazing, resistance brazing and dip brazing.(c) The welding and brazing of carbon, carbon-manganese, and low and high alloy steels; and copper, aluminium, nickel, titanium and alloys of these materials.The principles established in this Standard may be used in the qualification of processes, materials and applications not covered by the above (see also Clause 1.5 and Clause 1.6). For flash butt welding qualification, refer to AS 4413. Specific details for stud welding, electron-beam welding, plasma arc welding, electro-gas welding, and friction welding processes are not covered by this Standard. Where this Standard makes reference to other Standards, these referenced Standards are not intended to be limiting or exclusive and other equivalent National Standards acceptable to the parties concerned may be substituted for the referenced Standards. AS/NZS 1200 provides a list of pressure equipment Standards used in Australia and New Zealand. Compliance with ANSI/ASME Section IX, BS EN 287 or BS EN 288 is deemed as an acceptable alternative to the requirements of this Standard where agreed between the parties concerned. Where this Standard (AS/NZS 3992) requires tests not already completed under these overseas Standards then this can be covered by those additional tests only, rather than repeating the full set of tests, e.g. as part of a production test plate.

Committee
ME-001
DocumentType
Standard
ISBN
0 7337 1876 0
Pages
90
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

Amendment 1 to AS/NZS 3992:1998 see DR 99467 CP First published in Australia as AS 3992-1992.Revised and redesignated AS/NZS 3992:1998. First published in Australia as AS 3992-1992. Revised and redesignated AS/NZS 3992:1998.

AS 2203.1-1990 Cored electrodes for arc-welding - Ferritic steel electrodes
AS 3597-1993 Structural and pressure vessel steel - Quenched and tempered plate
AS 2205.7.1-2003 Methods for destructive testing of welds in metal Charpy V-notch impact fracture toughness test
AS 2074-1982 Steel castings
AS 1167.1-1993 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS 2812-2005 Welding, brazing and cutting of metals - Glossary of terms (Reconfirmed 2018)
AS 4041-2006 Pressure piping (Reconfirmed 2016)
AS 4037-1999 Pressure equipment - Examination and testing (Reconfirmed 2016)
AS 1796-2001 Certification of welders and welding supervisors (Reconfirmed 2016)
AS 1391-1991 Methods for tensile testing of metals
AS/NZS 1594:2002 Hot-rolled steel flat products (Reconfirmed 2016)
AS 1858.1-1986 Electrodes and fluxes for submerged-arc welding - Carbon steels and carbon-manganese steels
AS/NZS 1167.1:2005 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS/NZS 3788:2006 Pressure equipment - In-service inspection (Reconfirmed 2017)
AS 2717.2-1988 Welding - Electrodes - Gas metal arc Aluminium and aluminium alloy
AS 4041-1998 Pressure piping
AS 2885.2-2007 Pipelines - Gas and liquid petroleum Welding
AS 2971-1987 Serially produced pressure vessels
AS 2812-1985 Welding, brazing and cutting of metals - Glossary of terms
AS/NZS 3509:2003 LP Gas fuel vessels for automotive use
AS/NZS 1553.1:1995 Covered electrodes for welding - Low carbon steel electrodes for manual metal-arc welding of carbon steels and carbon-manganese steels
AS 2885.2-1995 Pipelines - Gas and liquid petroleum - Welding
AS 1858.1-2003 Electrodes and fluxes for submerged-arc welding Carbon steels and carbon-manganese steels
AS 2205.4.2-1997 Methods for destructive testing of welds in metal Fillet break test
AS 2873-1986 Carbon-manganese steel cylinders for compressed gases - Seamless - 0.1 kg to 500 kg
AS 1210-1997 Pressure vessels
AS 2205.4.1-2003 Methods for destructive testing of welds in metal Nick-break test (Reconfirmed 2018)
AS 2205.3.3-1997 Methods for destructive testing of welds in metal - Longitudinal guided bend test
AS 3920.1-1993 Assurance of product quality Pressure equipment manufacture
AS 1167.2-1986 Welding and brazing - Filler metals - Filler metal for welding
AS 2205.4.2-2003 Methods for destructive testing of welds in metal Fillet break test (Reconfirmed 2018)
AS 2205.3.1-1997 Methods for destructive testing of welds in metal Transverse guided bend test
AS 1228-2006 Pressure equipment - Boilers
AS 2062-1997 Non-destructive testing - Penetrant testing of products and components
AS 2205.3.1-2003 Methods for destructive testing of welds in metal Transverse guided bend test (Reconfirmed 2018)
AS 2205.3.5-1997 Methods for destructive testing of welds in metal Tongue bend test
AS 2074-2003 Cast steels
AS 2205.4.1-1997 Methods for destructive testing of welds in metal Nick-break test
AS/NZS 1200:1994 Pressure equipment
AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
AS/NZS 3509:1996 LP gas fuel vessels for automotive use
AS 3545-1988 Welding positions
AS 2971-2007 Serially produced pressure vessels (Reconfirmed 2017)
AS 2205.3.4-2003 Methods for destructive testing of welds in metal Transverse joggle-butt wrap-around bend test
AS 2205.2.2-1997 Methods for destructive testing of welds in metal - All-weld-metal tensile test
AS 4458-1997 Pressure equipment - Manufacture (Reconfirmed 2016)
AS 2205.3.5-2003 Methods for destructive testing of welds in metal Tongue bend test (Reconfirmed 2018)
AS 2205.2.1-2003 Methods for destructive testing of welds in metal Transverse butt tensile test
AS/NZS 1167.2:1999 Welding and brazing - Filler metals Filler metal for welding
AS 2205.5.1-1997 Methods for destructive testing of welds in metal Macro metallographic test for cross-section examination
AS 2205.2.3-1997 Methods for destructive testing of welds in metal Transverse joggle-butt tensile test
AS 1796-1993 Certification of welders and welding supervisors
AS 2717.3-1992 Welding - Electrodes - Gas metal arc Corrosion-resisting chromium and chromium-nickel steel electrodes
AS 3545-2004 Welding positions
AS/NZS 1594:1997 Hot-rolled steel flat products
AS 1548-1995 Steel plates for pressure equipment
AS 2205.3.2-2003 Methods for destructive testing of welds in metal Transverse free bend test
AS 2205.5.1-2003 Methods for destructive testing of welds in metal Macro metallographic test for cross-section examination (Reconfirmed 2018)
AS 1817-1991 Metallic materials - Vickers hardness test
AS 2030 SUPP 1-1986 Foreign gas cylinder specifications
AS 2205.2.2-2003 Methods for destructive testing of welds in metal All-weld-metal tensile test
AS 1858.2-1989 Electrodes and fluxes for submerged-arc welding - Low and intermediate alloy steels
AS 4413-1996 Steel tubes - Pressure application - Flash butt welding
AS 2205.2.3-2003 Methods for destructive testing of welds in metal Transverse joggle-butt tensile test
AS 2205.3.3-2003 Methods for destructive testing of welds in metal Longitudinal guided bend test
AS 2205.3.4-1997 Methods for destructive testing of welds in metal Transverse joggle-butt wrap-around bend test
AS 1210-1989 Unfired Pressure Vessels (known as the SAA Unfired Pressure Vessels Code)
AS 2205.3.2-1997 Methods for destructive testing of welds in metal Transverse free bend test
AS/NZS 2717.1:1996 Welding - Electrodes - Gas metal arc - Ferritic steel electrodes
AS/NZS 1200:2000 Pressure equipment
AS 2205.2.1-1997 Methods for destructive testing of welds in metal Transverse butt tensile test
AS/NZS 3788:1996 Pressure equipment - In-service inspection

AS 1988.1-2006 Welding of ferrous castings - Steel castings
AS/NZS 1554.3:2002 Structural steel welding - Welding of reinforcing steel
AS/NZS 1554.1:2004 Structural steel welding Welding of steel structures
AS 2885.2-2002 Pipelines - Gas and liquid petroleum - Welding
AS/NZS 4645.2:2008 Gas distribution networks Steel pipe systems
AS/NZS 1554.7:2006 Structural steel welding Welding of sheet steel structures
AS 1796-2001 Certification of welders and welding supervisors (Reconfirmed 2016)
AS 1796-2001 Certification of welders and welding supervisors (Reconfirmed 2016)
AS 1210-2010 Pressure vessels (Reconfirmed 2021)
AS/NZS 1200:2000 Pressure equipment
AS/NZS 1554.5:2011 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1228-2006 Pressure equipment - Boilers
AS/NZS 1554.6:2012 Structural steel welding Welding stainless steels for structural purposes
AS/NZS ISO 3834.5:2008 Quality requirements for fusion welding of metallic materials Documents with which it is necessary to conform to claim conformity to the quality requirements of AS/NZS ISO 3834.2, AS/NZS ISO 3834.3 or AS/NZS ISO 3834.4
AS 4041-2006 Pressure piping (Reconfirmed 2016)
AS/NZS 2022:2003 Anhydrous ammonia - Storage and handling (Reconfirmed 2023)
AS 3577-2006 Steel cylinders for compressed gases - Welded - 150 kg to 500 kg
AS 2885.2-2007 Pipelines - Gas and liquid petroleum Welding
AS 4037-1999 Pressure equipment - Examination and testing (Reconfirmed 2016)
AS 3920.1-1993 Assurance of product quality Pressure equipment manufacture
AS 2980-2004 Qualification of welders for fusion welding of steels
AS/NZS 3788:2006 Pressure equipment - In-service inspection (Reconfirmed 2017)
AS/NZS 1554.5:2004 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1210-1997 Pressure vessels
AS 1548-1995 Steel plates for pressure equipment
AS/NZS 1554.1:2000 Structural steel welding Welding of steel structures
AS/NZS 1554.3:2008 Structural steel welding Welding of reinforcing steel
AS/NZS 2980:2007 Qualification of welders for fusion welding of steels
AS/NZS 3509:2009 LP Gas fuel vessels for automotive use (Reconfirmed 2019)
AS/NZS 3788:2001 Pressure equipment - In-service inspection
AS 1548-2008 Fine grained, weldable steel plates for pressure equipment (Reconfirmed 2018)
AS 2971-2002 Serially produced pressure vessels
AS/NZS 1554.1:2011 Structural steel welding Welding of steel structures
AS 2971-2007 Serially produced pressure vessels (Reconfirmed 2017)

View more information
US$134.20
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.