• There are no items in your cart

AS 4233.1:2013

Redesignated
Redesignated

A redesignated Standard is one that has had its number changed. This could be the main number, the part number or the sub-part number.

High pressure water jetting systems Safe operation and maintenance
Published date

12-12-2013

This Standard provides requirements and guidance for the operation and maintenance of water jetting equipment. It describes methods for eliminating hazards or minimizing risks associated with high pressure water jetting. This Standard applies to high pressure water jetting systems with an output capability greater than 800 bar litres per minute and less than 5600 bar litres per minute (identified as Class A) and systems with an output capability in excess 5600 bar litres per minute (identified as Class B).

This Standard provides requirements and guidance for the operation and maintenance of water jetting equipment. It describes methods for eliminating hazards or minimizing risks associated with high pressure water jetting.This Standard applies to high pressure water jetting systems with an output capability greater than 800 bar litres per minute and less than 5600 bar litres per minute (identified as Class A) and systems with an output capability in excess 5600 bar litres per minute (identified as Class B).This Standard applies to:(a)High pressure water jetting systems pressurized by positive displacement pumps with an output capability greater than 800 bar litres per minute.(b)High pressure water jetting operations carried out at pressures above 800 bar litres per minute and includes jetting operations involving the use of additives and abrasives.(c)Water jetting operations below 800 bar litres per minute where there is a foreseeable risk of injury to operators.NOTE: The guidance provided in this Standard may also be used for any water jetting operation.

Committee
SF-043
DocumentType
Standard
ProductNote
Redesignated to AS 4233.1:2013 by Amendment 1.
PublisherName
Standards Australia
Status
Redesignated
SupersededBy
Supersedes

Originated as AS/NZS 4233(Int):1994.Previous edition AS/NZS 4233.1:1999.Second edition 2013.

AS 2865-2009 Confined spaces
AS/NZS 2161.2:2005 Occupational protective gloves General requirements
AS/NZS 1715:2009 Selection, use and maintenance of respiratory protective equipment
AS/NZS 2210.2:2009 Occupational protective footwear Test methods (ISO 20344:2004, MOD)
AS 1885.1-1990 Measurement of occupational health and safety performance Describing and reporting occupational injuries and disease, known as the Workplace injury and disease recording standard
AS/NZS ISO 6529:2006 Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases
AS 1939 SUPP 2-1990 Degrees of protection provided by enclosures for electrical equipment (IP Code) - Wallchart 2 (Supplement 2 to AS 1939-1990)
AS 1939 SUPP 1-1990 Degrees of protection provided by enclosures for electrical equipment (IP Code) - Wallchart 1 (Supplement 1 to AS 1939-1990)
AS/NZS 4801:2001 Occupational health and safety management systems - Specification with guidance for use
AS/NZS 1270:2002 Acoustics - Hearing protectors (Reconfirmed 2014)
AS 1742.3-2009 Manual of uniform traffic control devices Traffic control for works on roads
AS/NZS 1337.0(Int):2010 Personal eye protection - Eye and face protectors - Vocabulary
AS/NZS 2161.5:1998 Occupational protective gloves Protection against cold
AS/NZS 2210.1:2010 Safety, protective and occupational footwear Guide to selection, care and use
AS 1319-1994 Safety signs for the occupational environment (Reconfirmed 2018)
AS/NZS 1337.6:2012 Personal eye protection Prescription eye protectors against low and medium impact
AS/NZS 1801:1997 Occupational protective helmets
AS 3765.2-1990 Clothing for protection against hazardous chemicals Limited protection against specific chemicals
AS/NZS 2161.3:2005 Occupational protective gloves Protection against mechanical risks (Reconfirmed 2016)
AS 1885.1 SUPP 1-1991 Measurement of occupational health and safety performance Describing and reporting occupational injuries and disease - Workplace injury and disease recording form (Supplement to AS 1885.1-1990)
AS/NZS 1337.5:2011 Eye and face protection Eye protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
AS/NZS 1337.2:2012 Personal eye protection Mesh eye and face protectors for occupational applications
AS/NZS 1337.4:2011 Eye and face protection Filters and eye protectors against laser radiation (laser eye-protectors)
AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices Harnesses and ancillary equipment
AS/NZS 1891.3:1997 Industrial fall-arrest systems and devices - Fall-arrest devices
AS 3765.1-1990 Clothing for protection against hazardous chemicals Protection against general or specific chemicals
AS 2801-1985 Information processing - Conversion between the Australian Standard 7-bit coded character set (AS 1776) and the CCITT International Telegraph Alphabet No 2 (ITA 2)
AS/NZS 1337.1:2010 Personal eye protection Eye and face protectors for occupational applications
AS 60529-2004 Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.