• There are no items in your cart

AS/NZS 4455.1:2008

Current
Current

The latest, up-to-date edition.

Masonry units, pavers, flags and segmental retaining wall units Masonry units (Reconfirmed 2020)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

06-30-2008

Preview

1 - AS/NZS 4455.1:2008 MASONRY UNITS, PAVERS, FLAGS AND SEGMENTAL RETAINING WALL UNITS - MASONRY UNITS
4 - PREFACE
5 - CONTENTS
6 - SECTION 1 SCOPE AND GENERAL
6 - 1.1 SCOPE
6 - 1.2 APPLICATION
7 - 1.3 NORMATIVE REFERENCES
7 - 1.4 DEFINITIONS
7 - 1.4.1 Block
7 - 1.4.2 Brick
7 - 1.4.3 Characteristic value
7 - 1.4.4 Compressive strength
7 - 1.4.5 Dimensional changes
8 - 1.4.6 Dimensional deviation
8 - 1.4.7 Efflorescence
8 - 1.4.8 Face
8 - 1.4.9 Face shells
8 - 1.4.10 Face-shell width
8 - 1.4.11 Lot
8 - 1.4.12 Masonry unit
8 - 1.4.13 Mean
8 - 1.4.14 Pitted surface
8 - 1.4.15 Salt attack resistance
8 - 1.4.16 Shall
9 - 1.4.17 Should
9 - 1.4.18 Standard deviation
9 - 1.4.19 Unconfined compressive strength
9 - 1.4.20 Web
9 - 1.4.21 Work size
9 - 1.5 NOTATION
13 - SECTION 2 PRODUCT REQUIREMENTS
13 - 2.1 GENERAL
13 - 2.2 DIMENSIONAL DEVIATIONS FROM WORK SIZE
13 - 2.2.1 Performance requirement
13 - 2.2.2 Methods
13 - 2.2.3 Deemed to satisfy
14 - 2.2.4 Dimensional consistency between deliveries
14 - 2.3 UNCONFINED COMPRESSIVE STRENGTH
14 - 2.3.1 Performance requirement
14 - 2.3.2 Method
14 - 2.4 INTEGRITY
14 - 2.4.1 Performance requirement
14 - 2.4.2 Deemed to satisfy
15 - 2.5 DURABILITY
15 - 2.5.1 Performance requirement
16 - 2.5.2 Method
17 - APPENDIX A - DEMONSTRATION OF COMPLIANCE FOR STRENGTH
17 - A1 GENERAL
17 - A2 DEMONSTRATION OF COMPLIANCE FOR A SINGLE LOT
17 - A3 DEMONSTRATION OF COMPLIANCE FOR LOTS TAKEN DURING CONTINUOUS MANUFACTURE
18 - APPENDIX B - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
18 - B1 SCOPE
18 - B2 STATISTICAL SAMPLING
18 - B3 PRODUCT CERTIFICATION
19 - B4 SUPPLIER’S QUALITY MANAGEMENT SYSTEM
19 - B5 OTHER MEANS OF ASSESSMENT
20 - APPENDIX C - DETERMINATION OF CHARACTERISTIC VALUE
20 - C1 SCOPE
20 - C2 EVALUATION OF CHARACTERISTIC VALUE
20 - C3 COEFFICIENT OF VARIATION
22 - APPENDIX D - PURCHASING GUIDELINES
22 - D1 SCOPE
22 - D2 ORDERING
22 - D3 IDENTIFICATION
22 - D4 VERIFICATION
22 - D4.1 Quality records
22 - D4.2 Additional verification testing
23 - APPENDIX E - TESTING FOR ADDITIONAL PROPERTIES

Sets out requirements for masonry units used for walls built in accordance with AS3700 and NZS4230.

This Standard specifies requirements for masonry units for walling built in accordance with AS 3700 and NZS 4230.The masonry units covered by this Standard include those made of the following materials:(a) Autoclaved aerated concrete.(b) Calcium silicate (sand-lime).(c) Concrete (dense or lightweight).(d) Dimension stone (cut or dressed).(e) Fired clay (with or without shale).Dimension stone has a wide variety of characteristics. These are not fully covered by the requirements of this Standard.Tiles, or similar, that are intended to be rigidly fixed or suspended are not within the scope of this Standard.This Standard does not specify requirements for masonry units other than requirements for the verification of their nominated characteristic values.NOTES:1 Guidance on means for demonstrating compliance with this Standard is given in Appendix B.2 Guidance on the determination of characteristic value is given in Appendix C.3 Guidance on the content of a purchasing agreement is given in Appendix D.4 Guidance on optional testing is given in Appendix E.5 Some non-rectilinear shapes for walling units are not illustrated in this Standard; however, this Standard may be used, but not all test methods mentioned may be applicable to such shapes.

Committee
BD-026
DocumentType
Standard
ISBN
0 7337 8801 7
Pages
19
ProductNote
Reconfirmed 14/08/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 14/08/2020
PublisherName
Standards Australia
Status
Current
Supersedes

First published in Australia as AS A21-1934.
Int 306 first published 1948.
Int 315 first published 1949.
AS A21-1934 revised and redesignated Int 323-1953.
Revised and redesignated AS A21-1964.
Int 315-1949 revised and redesignated AS A91-1967.
Int 306-1948 revised and redesignated in part as AS A87-1963 and AS 1346-1973.
AS A91-1967 revised and redesignated AS 1653-1974.
AS A87-1963 revised and redesignated AS 1500-1974.
AS A21-1964 revised and redesignated AS 1225-1980.
Second edition AS 1225-1984.
AS 1346-1973 and AS 1500-1974 revised, amalgamated and redesignated AS 2733-1984.
Second edition AS 1653-1985.
First published in New Zealand as NZSS 366-1943.
Second edition 1963.
NZS 595 first published 1966.
Revised and redesignated NZS 3102P-1974.
NZS 3116.1 first published 1981.
NZS 3102P-1974 revised and redesignated NZS 3102-1983.
Second edition NZS 3116.1:1991.
AS 1225-1985, AS 1653-1985, part of AS 2733-1984, NZSS 366-1963, NZS 3102-1983, and NZS 3116.1:1991 jointly revised, amalgamated and redesignated AS/NZS 4455:1997.
AS/NZS 4455:1997 revised and designated, in part, AS/NZS 4455.1:2008.
Reconfirmed 2020. Originated in Australia as AS A21-1934. Final Australian edition AS 1653-1985. Originated in New Zealand as NZSS 366-1943. Final New Zealand edition NZS 3116.1:1991. Jointly revised, amalgamated and redesignated AS/NZS 4455:1997. AS/NZS 4455:1997 revised and designated, in part, AS/NZS 4455.1:2008.

AS/NZS 4456.7:2003 Masonry units, segmental pavers and flags - Methods of test Determining core percentage and material thickness (Reconfirmed 2023)
AS/NZS 4456.16:2003 Masonry units, segmental pavers and flags - Methods of test Determining permeability to water (Reconfirmed 2023)
AS/NZS 4456.17:2003 Masonry units, segmental pavers and flags - Methods of test Determining initial rate of absorption (suction) (Reconfirmed 2023)
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS/NZS 4456.8:2003 Masonry units, segmental pavers and flags - Methods of test Determining moisture content, dry density and ambient density (Reconfirmed 2023)
AS/NZS 4456.13:2003 Masonry units, segmental pavers and flags - Methods of test Determining pitting due to lime particles (Reconfirmed 2023)
AS/NZS 4456.14:2003 Masonry units, segmental pavers and flags - Methods of test Determining water absorption properties (Reconfirmed 2023)
AS/NZS 4456.2:2003 Masonry units, segmental pavers and flags - Methods of test Assessment of mean and standard deviation (Reconfirmed 2023)
AS/NZS 4456.15:2003 Masonry units, segmental pavers and flags - Methods of test Determining lateral modulus of rupture (Reconfirmed 2023)
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS/NZS 4456.4:2003 Masonry units, segmental pavers and flags - Methods of test Determining compressive strength of masonry units
AS/NZS 4456.3:2003 Masonry units, segmental pavers and flags - Methods of test Determining dimensions
AS/NZS 4456.6:2003 Masonry units, segmental pavers and flags - Methods of test Determining potential to effloresce (Reconfirmed 2023)
AS/NZS 4456.10:2003 Masonry units, segmental pavers and flags - Methods of test Determining resistance to salt attack (Reconfirmed 2023)
AS/NZS 4456.12:2003 Masonry units and segmental pavers and flags - Methods of test Determining coefficients of contraction (Reconfirmed 2023)

AS 2699.2:2020 Built-in components for masonry construction Connectors and accessories
AS 3700:2018 Masonry Structures
AS 3700:2018 Sup 1:2020 Masonry structures - Commentary (Supplement 1 to AS 3700:2018)
AS 4773.2-2010 Masonry in small buildings - Construction
AS 3700-2011 Masonry structures
AS 4773.1-2010 Masonry in small buildings - Design
AS 2699.1:2020 Built-in components for masonry construction Wall ties

View more information
US$69.34
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.