• There are no items in your cart

AS/NZS 4476:1997

AvailableSuperseded
AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Acoustics - Octave-band and fractional-octave-band-filters
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

07-05-1997

Preview

1 - AS/NZS 4476:1997 ACOUSTICS-OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS
4 - PREFACE
6 - CONTENTS
7 - 1 Scope
7 - 2 Normative references
8 - 3 Definitions
8 - 3.1 bandpass filter:
8 - 3.2 octave ratio:
8 - 3.3 bandwidth designator:
8 - 3.4 reference frequency:
8 - 3.5 exact midband frequency:
9 - 3.6 nominal midband frequencies:
9 - 3.7 bandedge frequencies:
9 - 3.8 normalized frequency:
9 - 3.9 filter bandwidth:
9 - 3.10 octave-band filter:
10 - 3.11 fractional-octave-band filter:
10 - 3.12 filter attenuation:
10 - 3.13 reference attenuation:
10 - 3.14 relative attenuation:
10 - 3.15 normalized effective bandwidth:
11 - 3.16 normalized reference bandwidth:
11 - 3.17 filter integrated response:
11 - 3.18 reference level range:
11 - 3.19 reference input signal level:
11 - 3.20 level difference:
11 - 3.21 reference level difference:
11 - 3.22 level linearity error:
11 - 3.23 linear operating range:
11 - 3.24 level range control:
11 - 3.25 measurement range:
11 - 3.26 analogue filter:
12 - 3.27 sampled-data filter:
12 - 3.28 digital filter:
12 - 3.29 real-time operation:
12 - 3.30 aliased frequency components:
12 - 3.31 anti-alias filter:
12 - 4 Performance requirements
12 - 4.1 General
12 - 4.2 Nominal midband frequencies
12 - 4.3 Reference attenuation
13 - 4.4 Relative attenuation
15 - 4.5 Filter integrated response
16 - 4.6 Linear operating range
16 - 4.7 Real-time operation
16 - 4.8 Anti-alias filters
16 - 4.9 Summation of output signals
17 - 4.10 Flat frequency response
17 - 4.11 Maximum input signal
17 - 4.12 Terminating impedances
17 - 4.13 Reference environmental conditions
17 - 4.14 Sensitivity to various environments
17 - 4.14.1 Ambient air temperature
17 - 4.14.2 Relative humidity
17 - 4.14.3 Alternating magnetic fields
18 - 4.14.4 Electrostatic discharges
18 - 4.14.5 Radio-frequency electromagnetic fields
18 - 4.15 Power supply check
18 - 5 Test methods
18 - 5.1 General
18 - 5.2 Test instruments
19 - 5.3 Relative attenuation
20 - 5.4 Filter integrated response
20 - 5.5 Linear operating range
21 - 5.6 Real-time operation
22 - 5.7 Anti-alias filters
22 - 5.8 Summation of output signals
23 - 5.9 Flat frequency response
23 - 5.10 Sensitivity to variations of the environment
23 - 5.11 Sensitivity to electrostatic discharge
24 - 5.12 Sensitivity to radio-frequency electromagnetic fields
24 - 6 Instrument marking
24 - 7 Instruction manual
26 - Annex A - Midband frequencies
28 - Annex B - Normalized frequencies at breakpoints of limits on minimum and maximum relative attenuation for...
30 - Annex C - Recommendations for verification of the electrical performance characteristics of bandpass filters

Specifies performance requirements and methods for testing the performance of analogue, sampled-data and digital implementations of band-pass filters that comprise a filter set or spectrum analyser. Performance requirements are provided for three filter classes. It is identical with and has been reproduced from IEC 1260:1995.

This International Standard provides performance requirements and methods for testing the performance of analogue, sampled-data, and digital implementations of band-pass filters that comprise a filter set or spectrum analyser. The extent of the passband region of a filter's relative attenuation characteristic is a constant percentage of the midband frequency for all filters of a given bandwidth. An instrument complying with the requirements of this International Standard may contain any number of bandpass filters covering any desired frequency range.Performance requirements are provided for three filter classes designated class 0, class 1, and class 2. Allowed tolerances increase as the class number increases.Bandpass filters complying with the performance requirements of this standard may be part of various measurement systems or may be an integral component of a specific instrument and shall operate in real time. Performance requirements apply to any method that is selected by the manufacturer to implement the design of the filters.Instruments complying with the requirements of this standard are capable of providing frequency-band-filtered spectral information for a wide variety of signals, for example, time-varying, intermittent, and steady; broadband and discrete frequency; and long and short durations. For applications involving transient signals, different realizations of filters meeting the requirements of this standard may give different results.

Committee
AV-002
DocumentType
Standard
ISBN
0 7337 1180 4
Pages
24
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes
UnderRevision

Standards Relationship
IEC 61260:1995 Identical

First published in Australia as AS Z41-1969.Withdrawn 1996.First published in New Zealand as NZS 1499:1965.AS Z41-1969 and NZS 1499:1965 jointly revised, amalgamated and redesignated AS/NZS 4476:1997. First published in Australia as AS Z41-1969. Withdrawn 1996. First published in New Zealand as NZS 1499:1965. AS Z41-1969 and NZS 1499:1965 jointly revised, amalgamated and redesignated AS/NZS 4476:1997.

AS 1259.2-1990 Acoustics - Sound level meters Integrating - Averaging
AS 1259.1-1990 Acoustics - Sound level meters Non-integrating
AS 2533-1982 Acoustics - Preferred frequencies for measurements

AS/NZS 1269.1:2005 Occupational noise management Measurement and assessment of noise immission and exposure (Reconfirmed 2016)
AS ISO 140.4-2006 Acoustics - Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation between rooms (ISO 140-4:1998, MOD)
AS/NZS 1269.1:1998 Occupational noise management - Measurement and assessment of noise immission and exposure
AS ISO 140.6-2006 Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurements of impact sound insulation of floors
AS ISO 354-2006 Acoustics - Measurement of sound absorption in a reverberation room
AS 1191-2002 Acoustics - Method for laboratory measurement of airborne sound transmission insulation of building elements (Reconfirmed 2016)
AS ISO 140.8-2006 Acoustics - Measurement of sound insulation in buildings and of building elements Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
AS ISO 8253.2-2009 Acoustics - Audiometric test methods Sound field audiometry with pure tone and narrow-band test signals
AS/NZS 1269.4:2005 Occupational noise management Auditory assessment
AS/NZS 60065:2003 Audio, video and similar electronic apparatus - Safety requirements (IEC 60065:2001, MOD)
AS 2913-2000 Evaporative airconditioning equipment (Reconfirmed 2016)
AS/NZS 1270:2002 Acoustics - Hearing protectors (Reconfirmed 2014)
AS/NZS 2499:2000 Acoustics - Measurements of sound insulation in buildings and of buildings elements - Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it (Reconfirmed 2016)
AS/NZS 60065:2012 Audio, video and similar electronic apparatus - Safety requirements (IEC 60065, Ed.7.2 (2011) MOD)
AS/NZS 1270:1999 Acoustics - Hearing protectors
AS 2533-2002 Acoustics - Preferred frequencies and band centre frequencies
AS/NZS 60704.1:2009 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise General requirements
AS ISO 8253.1-2009 Acoustics - Audiometric test methods Basic pure tone air and bone conduction threshold audiometry
AS/NZS 2460:2002 Acoustics - Measurement of the reverberation time in rooms (Reconfirmed 2016)
AS/NZS 1269.4:2014 Occupational noise management Auditory assessment
AS/NZS 1269.4:1998 Occupational noise management - Auditory assessment
AS 2377-2002 Acoustics - Methods for the measurement of railbound vehicle noise
AS 60118.2-2007 Hearing aids - Hearing aids with automatic gain control circuits

View more information
US$69.34
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.