• There are no items in your cart

AS/NZS 4534:2006

Current
Current

The latest, up-to-date edition.

Zinc and zinc/aluminium-alloy coatings on steel wire (Reconfirmed 2017)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

07-19-2006

Preview

Specifies requirements for the mass, quality and testing of zinc and zinc/aluminium alloy on steel wire. The coatings are applied in a continuous process and may be formed either by the application of molten metal or by electrodedeposition. Six coating mass classes are covered.

This Standard specifies requirements for the mass, quality and testing of zinc coatings and zinc/aluminium-alloy coatings on steel wire of circular or non-circular (shaped) cross-section. The coatings are applied in a continuous process and may be formed either by the application of molten metal or by electrodeposition.Six standard coating mass classes and a range of special coating mass classes are covered. The standard classes are intended, in general, for applications subjected to normal atmospheric corrosion conditions, whereas the special classes are specifically designed to provide acceptable durability under severe to extreme service conditions, such as for prolonged immersion in freshwater or seawater.This Standard applies to coatings on wire at its final size, whether or not the coating has been applied after final cold working, prior to cold working, or at an intermediate stage of cold working.Matters not relating to the coating itself are outside the scope of this Standard.This Standard does not apply to coatings on articles that have been fabricated from uncoated steel wire and which have subsequently been coated with zinc or zinc/aluminium alloy, except where the coating has been applied in a specialized continuous process (e.g. for wire netting) as opposed to batch treatment (e.g. for nails).NOTES:1 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.2 Coatings in accordance with this Standard may not be available in every combination of wire size, coating mass class and coating type. Reference should be made to appropriate Australian Standards for the types of wire involved.3 Means for determining compliance with this Standard are given in Appendix B.4 Except as stated in this Clause, requirements for zinc coatings on manufactured wire articles, which have been electroplated following fabrication, are given in AS 1789.5 This Standard does not specify the Preece test for coating uniformity. If this test is required, arrangements should be made between the purchaser and the supplier.

Committee
MT-009
DocumentType
Standard
ISBN
0 7337 7621 3
Pages
31
ProductNote
Reconfirmed 29/09/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 29/09/2017
PublisherName
Standards Australia
Status
Current
Supersedes

First published in Australia in part as part of AS K53.1-1934.AS K53.2 first published in part 1935.AS K53.1-1934 and AS K53.2-1935 revised, amalgamated and redesignated AS K53-1942.Second edition 1960.Revised and redesignated AS 1650-1974.Second edition 1981.Third edition 1989.Jointly revised and redesignated in part as AS/NZS 4534:1998.Second edition 2006.Reconfirmed 2017. Originated, in part, as part of AS K53.1-1934 and AS K53.2-1935. Previous edition AS/NZS 4534:1998. Second edition 2006.

AS 2331.1.4-2001 Methods of test for metallic and related coatings Local thickness tests - Magnetic induction and eddy current methods
AS 1789-2003 Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017)
AS 2331.2.3-2001 Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Hydrogen evolution method for zinc coatings
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS/NZS ISO 9004:2000 Quality management systems - Guidelines for performance improvements
AS/NZS ISO 9001:2000 Quality management systems - Requirements
AS/NZS 2243.2:2006 Safety in laboratories Chemical aspects
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS 2805.6.5.3-2004 Electronic funds transfer - Requirements for interfaces Key management - TCU initialization - Asymmetric
AS 2805.6.4-2006 Electronic funds transfer - Requirements for interfaces Key management - Session keys - Terminal to acquirer
AS 2805.6.6-2006 Electronic funds transfer - Requirements for interfaces Key management - Session keys - Node to node with KEK replacement
AS 2331.3.1-2001 Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017)
AS/NZS 2243.1:2005 Safety in laboratories Planning and operational aspects
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 2805.6.5.1-2000 Electronic funds transfer - Requirements for interfaces Key management - TCU initialization - Principles
AS 1329.1-1994 Methods for the analysis of zinc and zinc alloys Determination of aluminium content - Titrimetric method
AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS 2805.6.2-2002 Electronic funds transfer - Requirements for interfaces Key management - Transaction keys (Reconfirmed 2013)
AS 2805.6.5.2-2000 Electronic funds transfer - Requirements for interfaces Key management - TCU initialization - Symmetric
AS 1242-1985 Zinc ingots
AS 2805.6.3-2000 Electronic funds transfer - Requirements for interfaces Key management - Session keys - Node to node
AS 2805.6.1-2002 Electronic funds transfer - Requirements for interfaces Key management - Principles

AS 1684.3-2010 Residential timber-framed construction Cyclonic areas
AS 2699.2:2020 Built-in components for masonry construction Connectors and accessories
AS 1684.4-2010 Residential timber-framed construction Simplified - Non-Cyclonic Areas
AS 1684.2-2010 Residential timber-framed construction Non-cyclonic areas
AS 2423-2002 Coated steel wire fencing products for terrestrial, aquatic and general use (Reconfirmed 2021)
AS 4312:2019 Atmospheric corrosivity zones in Australia
AS 1154.3-2009 Insulator and conductor fittings for overhead power lines Performance and general requirements for helical fittings (Reconfirmed 2019)
AS 3958.1-2007 Ceramic tiles Guide to the installation of ceramic tiles
AS 3700:2018 Masonry Structures
AS 1472-2003 Carbon steel spring wire for mechanical springs
AS 4773.1-2010 Masonry in small buildings - Design
AS 2699.1:2020 Built-in components for masonry construction Wall ties
AS 1789-2003 Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017)
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 1394-2001 Round steel wire for ropes
AS 2331.2.3-2001 Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Hydrogen evolution method for zinc coatings
AS/NZS 2785:2000 Suspended ceilings - Design and installation
AS/NZS 3863:2002 Galvanized mild steel wire for armouring of cables
AS 1684.3-2006 Residential timber-framed construction Cyclonic areas
AS 3569-2010 Steel wire ropes - Product specification

View more information
US$82.57
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.