• There are no items in your cart

AS/NZS 4765:2007

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Modified PVC (PVC-M) pipes for pressure applications
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-30-2017

Language(s)

English

Published date

09-20-2007

Preview

Specifies requirements for pipes, integral joints and post-formed bends of PVC-M for the conveyance of water and wastewater under pressure.

This Standard specifies requirements for pipes, integral joints and post-formed bends of PVC-M for the conveyance of water and wastewater under pressure. The pipes are intended for installation below ground, and above ground where they are not exposed to direct sunlight.NOTES:1 Relevant installation requirements for pipe systems, including PVC-M pressure pipes manufactured to this Standard and the associated fittings are covered by AS/NZS 2032, AS/NZS 2566.2 and the AS/NZS 3500 series, as applicable.2 If it is intended to use pipes complying with this Standard for the conveyance of fluids other than water, the manufacturer should be consulted.3 Two series of pipes are specified (see the Foreword in this Standard).

Committee
PL-021
DocumentType
Standard
ISBN
0 7337 8383 X
Pages
35
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published as AS/NZS 4765(Int):2000.This edition 2007. Originated as AS/NZS 4765(Int):2000. This edition 2007.

HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS/NZS 1462.4:2002 Methods of test for plastics pipes and fittings Method for determining reversion of plastics pipes (Reconfirmed 2017)
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
AS/NZS 1462.5:2002 Methods of test for plastics pipes and fittings Vicat softening temperature (Reconfirmed 2017)
AS/NZS 3500.1:2003 Plumbing and drainage Water services
AS/NZS 1462.16:2006 Methods of test for plastics pipes and fittings Method for high temperature testing of pipe (Reconfirmed 2017)
AS 1646.1-2000 Elastomeric seals for waterworks purposes - General requirements
AS/NZS 1462.6:1998 Methods of test for plastics pipes and fittings - Method for hydrostatic pressure testing of pipes
AS/NZS 3500.5:2000 National Plumbing and Drainage - Domestic installations
AS/NZS 3500.3:2003 Plumbing and drainage Stormwater drainage
AS/NZS 2566.2:2002 Buried flexible pipelines Installation (Reconfirmed 2016)
AS/NZS 1462.29:2006 Methods of test for plastics pipes and fittings Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003, MOD)
AS/NZS 1462.1:2006 Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings
AS/NZS 1462.15:1996 Methods of test for PVC pipes and fittings Method for determination of vinyl chloride monomer content (Reconfirmed 2017)
AS 1646.3-2000 Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
AS/NZS 3500.2:2003 Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 2032:2006 Installation of PVC pipe systems
AS/NZS 3500.4:2003 Plumbing and drainage Heated water services
AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation

AS 3571.2-2009 Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure water supply (ISO 10639:2004, MOD)
AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications
AS/NZS 3518:2013 Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications
AS 1646-2007 Elastomeric seals for waterworks purposes (Reconfirmed 2018)
AS/NZS 1260:2009 PVC-U pipes and fittings for drain, waste and vent application
AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications
AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
AS/NZS 4793:2009 Mechanical tapping bands for waterworks purposes
AS 3571.1-2009 Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD)

View more information
US$82.57
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.