Customer Support: +1 416-401-8730

Login to i2i Subscription Intertek.com
  • There are no items in your cart
Please enter a keyword to search
Advanced search

AS/NZS 4791:2006

Current
Current

The latest, up-to-date edition.

Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

07-25-2006

Publisher

Standards Australia

Preview

Specifies requirements for the mass, quality and testing of galvanized coatings applied to ferrous open sections on all surfaces except cut ends, using an in-line process that utilizes specialized equipment.

This Standard specifies requirements for the mass, quality and testing of galvanized coatings applied to ferrous open sections on all surfaces, using an in-line process that utilizes specialized equipment.Matters relating to the quality, properties, or dimensional requirements of the open sections are outside the scope of this Standard.NOTES:1 Advice and recommendations on information to be supplied by the purchaser to the hot-dip galvanizer at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A.2 Alternative means for determining compliance with this Standard are given in Appendix B.3 General information on factors that affect the corrosion of galvanized steel is given in Appendix C.4 For guidance on duplex protection systems below ground refer to Appendix G.5 Electroplated zinc coatings applied to steel strip for manufacture into open sections are not covered by this Standard. The application of this Standard to these coatings is subject to agreement between the purchaser and the supplier.

Committee
MT-009
DocumentType
Standard
ISBN
0 7337 7643 4
Pages
17
ProductNote
Reconfirmed 29/09/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 29/09/2017
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS/NZS 4791:1999.Second edition 2006.Reconfirmed 2017. Originated as AS/NZS 4791:1999. Second edition 2006.

AS 2331.3.11-2004 Methods of test for metallic and related coatings Corrosion and related property tests - Chemical residue tests
AS 2505.1-2004 Metallic materials Sheet, strip and plate - Bend tests
AS 2331.2.3-2001 Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Hydrogen evolution method for zinc coatings
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS 2331.2.1-2001 Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh, and analytical
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS/NZS 3750.15:1998 Paints for steel structures Inorganic zinc silicate paint (Reconfirmed 2013)
AS/NZS ISO 9004:2000 Quality management systems - Guidelines for performance improvements
AS/NZS 3750.9:1994 Paints for steel structures - Organic zinc-rich primer
AS 2331.1.3-2001 Methods of test for metallic and related coatings Local thickness tests - Magnetic method (Reconfirmed 2017)
AS/NZS 2243.10:2004 Safety in laboratories Storage of chemicals
AS/NZS 2243.1:2005 Safety in laboratories Planning and operational aspects
AS 2331.1.4-2001 Methods of test for metallic and related coatings Local thickness tests - Magnetic induction and eddy current methods
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS 2331.3.1-2001 Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017)
AS/NZS ISO 9001:2000 Quality management systems - Requirements
AS 2331.3.10-2001 Methods of test for metallic and related coatings Corrosion and related property tests - Cracks and pores in chromium
AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS/NZS 2243.2:2006 Safety in laboratories Chemical aspects

AS 1684.3-2010 Residential timber-framed construction Cyclonic areas
AS 1684.4-2010 Residential timber-framed construction Simplified - Non-Cyclonic Areas
AS/NZS 2311:2009 Guide to the painting of buildings
AS 1684.2-2010 Residential timber-framed construction Non-cyclonic areas
AS 1657-2013 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 3700:2018 Masonry Structures
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 2699.3:2020 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS 1138-2008 Thimbles for wire rope (Reconfirmed 2019)
AS 1657:2018 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 2311:2017 Guide to the Painting of Buildings

View more information
US$69.34
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

or

Get in touch with us